Go to file
Frans Hendriks b71181adc3 device/pci_device.c: Use verified boot to check oprom
Before oprom is executed, no check is performed if rom passes verification.
Add call to verified_boot_should_run_oprom() to verify the oprom.

verified_boot_should_run_oprom() expects and rom address as input pointer.
*rom is added as input parameter to should_run_oprom() which must be parsed
to verified_boot_should_run_oprom()..

BUG=N/A
TEST=Created verified binary and verify logging on Facebook FBG1701

Change-Id: Iec5092e85d34940ea3a3bb1192ea49f3bc3e5b27
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-10-04 16:24:44 +00:00
3rdparty Update arm-trusted-firmware submodule to upstream master 2019-10-03 18:30:08 +00:00
Documentation ifdtool: Add validate option to ifdtool 2019-10-03 15:28:15 +00:00
configs configs: Build test CONFIG_BOOTSPLASH 2019-09-27 16:20:16 +00:00
payloads libpayload: refactor fetching cbmem pointers 2019-10-03 15:27:30 +00:00
src device/pci_device.c: Use verified boot to check oprom 2019-10-04 16:24:44 +00:00
util ifdtool: Add validate option to ifdtool 2019-10-03 15:28:15 +00:00
.checkpatch.conf .checkpatch.conf: Ignore a few more warnings 2018-08-13 12:23:24 +00:00
.clang-format lint/clang-format: set to 96 chars per line 2019-06-13 20:14:00 +00:00
.editorconfig Add .editorconfig file 2019-09-10 12:52:18 +00:00
.gitignore util/bucts: Add tool to manipulate BUC.TS bit on Intel targets 2018-11-19 08:19:16 +00:00
.gitmodules 3rdparty/ffs: add open-power ffs utils 2019-08-25 07:37:11 +00:00
.gitreview
AUTHORS AUTHORS: Move src/device copyrights into AUTHORS file 2019-09-17 08:14:13 +00:00
COPYING
MAINTAINERS MAINTAINERS: Step down as RISC-V maintainer 2019-08-05 22:43:36 +00:00
Makefile coreboot/Makefile: display error when spaces in path of toplevel makefile 2019-09-26 10:11:14 +00:00
Makefile.inc Makefile: Create the build directory before bootblock.bin 2019-09-24 10:36:24 +00:00
README.md README: Convert to Markdown 2018-09-16 13:01:58 +00:00
gnat.adc
toolchain.inc Split MAYBE_STATIC to _BSS and _NONZERO variants 2019-08-26 20:56:29 +00:00

README.md

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.