coreboot-kgpe-d16/targets/tyan/s2895/Config.lb
Yinghai Lu 13f1c2af8b eric patch
1. x86_setup_mtrr take address bit.
        2. generic ht, pcix, pcie beidge...
        3. scan bus and reset_bus
        4. ht read ctrl to decide if the ht chain
           is ready
        5. Intel e7520 and e7525 support
        6. new ich5r support
        7. intel sb 6300 support.

yhlu patch
	1. split x86_setup_mtrrs to fixed and var
	2. if (resource->flags & IORESOURCE_FIXED ) return; in device.c pick_largest_resource
	3. in_conherent.c K8_SCAN_PCI_BUS


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1982 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-07-08 02:49:49 +00:00

70 lines
2.7 KiB
Text

# Sample config file for
# the Tyan s2895
# This will make a target directory of ./s2895
target s2895
mainboard tyan/s2895
# Tyan s2895
romimage "normal"
# 48K for SCSI FW
# option ROM_SIZE = 475136
# 48K for SCSI FW and 48K for ATI ROM
# option ROM_SIZE = 425984
# 64K for Etherboot
# option ROM_SIZE = 458752
# 64K for NIC option 48K for Raid option rom
# option ROM_SIZE = 409600
option USE_FALLBACK_IMAGE=0
# option ROM_IMAGE_SIZE=0x11800
# option ROM_IMAGE_SIZE=0x13800
option ROM_IMAGE_SIZE=0x15000
# option ROM_IMAGE_SIZE=0x17800
option XIP_ROM_SIZE=0x20000
option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
# payload ../../../payloads/filo.zelf
# payload ../../../payloads/tg3.zelf
# payload ../../../payloads/tg3--filo_hda2_vga.zelf
payload ../../../payloads/forcedeth--filo_hda2_vga.zelf
# payload ../../../payloads/forcedeth_vga.zelf
# payload ../../../payloads/forcedeth--filo_hda2_vga_5_4.zelf
# payload ../../../../../../elf/ram0_2.5_2.6.11.tiny.elf
# payload ../../../../../../elf/ram0_2.5_2.6.12.tiny.elf
# payload ../../../payloads/tg3--filo_hda2_vga_5_4.zelf
# payload ../../../payloads/tg3_vga.zelf
# payload ../../../payloads/tg3--filo_hda2_vgax.zelf
# payload ../../../payloads/tg3--filo_hda2_com2.zelf
# payload ../../../payloads/e1000--filo.zelf
# payload ../../../payloads/tg3--e1000--filo.zelf
# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
romimage "fallback"
option USE_FALLBACK_IMAGE=1
# option ROM_IMAGE_SIZE=0x11800
# option ROM_IMAGE_SIZE=0x13800
option ROM_IMAGE_SIZE=0x15000
# option ROM_IMAGE_SIZE=0x17800
option XIP_ROM_SIZE=0x20000
option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
# payload ../../../payloads/filo.zelf
# payload ../../../payloads/tg3.zelf
# payload ../../../payloads/tg3--filo_hda2_vga.zelf
payload ../../../payloads/forcedeth--filo_hda2_vga.zelf
# payload ../../../payloads/forcedeth_vga.zelf
# payload ../../../payloads/tg3--filo_hda2_vga_5_4.zelf
# payload ../../../payloads/tg3_vga.zelf
# payload ../../../payloads/tg3--filo_hda2_vgax.zelf
# payload ../../../payloads/tg3--filo_hda2_com2.zelf
# payload ../../../payloads/e1000--filo.zelf
# payload ../../../payloads/tg3--e1000--filo.zelf
# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"