Wolfgang Kamp 9ae1eb6961 Super I/O W83627DHG: Enable UART B by redirecting pins ... Pins 78-85 are set to GPIO after power on or reset. To enable UART B the pins must be redirected to it. Look at W83627DHG databook version 1.4 page 185 Chip (global) Control Register CR2C. Change-Id: I12b094a60d9c5cb2447a553be4679a4605e19845 Signed-off-by: Wolfgang Kamp <wmkamp@datakamp.de> Reviewed-on: http://review.coreboot.org/2626 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)		2013-03-15 17:51:48 +01:00
..
fintek	GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«	2013-03-01 10:16:08 +01:00
intel	GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«	2013-03-01 10:16:08 +01:00
ite	GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«	2013-03-01 10:16:08 +01:00
nsc	GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«	2013-03-01 10:16:08 +01:00
nuvoton	GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«	2013-03-01 10:16:08 +01:00
renesas	GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«	2013-03-01 10:16:08 +01:00
serverengines	GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«	2013-03-01 10:16:08 +01:00
smsc	AMD SB800: don't switch clock from 14 to 48 MHz for smscsuperio	2013-03-06 19:07:28 +01:00
via	GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«	2013-03-01 10:16:08 +01:00
winbond	Super I/O W83627DHG: Enable UART B by redirecting pins	2013-03-15 17:51:48 +01:00
Kconfig	AMD SB800: don't switch clock from 14 to 48 MHz for smscsuperio	2013-03-06 19:07:28 +01:00
Makefile.inc	GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«	2013-03-01 10:16:08 +01:00