Go to file
Angel Pons c072e794e6 AGESA f14/f15tn/f16kb: Factor out AGESA_VERSION_STRING
We use the same AGESA version numbers on all but one mainboard, so we
might as well factor them out. The only exception is asrock/e350m1,
which has the f15tn/f16kb version number even though it actually uses
AGESA f14. To preserve reproducibility, do not change it in this commit.

TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.

Change-Id: I0dad2352ccda454d5545f17228d52e4ff4f23f20
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41591
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26 11:36:07 +00:00
3rdparty 3rdparty/amd_blobs: update submodule pointer 2020-05-22 22:50:51 +00:00
Documentation Documentation: Add info about SoundWire coreboot implementation 2020-05-22 01:49:11 +00:00
LICENSES drivers: Use SPDX identifiers 2020-05-25 22:19:21 +00:00
configs mb/dell/optiplex_9010: Add Dell OptiPlex 9010 SFF support 2020-05-16 17:38:46 +00:00
payloads libpayload: Fix definitions of minimum integer values 2020-05-18 07:34:55 +00:00
src AGESA f14/f15tn/f16kb: Factor out AGESA_VERSION_STRING 2020-05-26 11:36:07 +00:00
tests tests: Add region-test for rdev API 2020-05-19 03:22:04 +00:00
util drivers: Use SPDX identifiers 2020-05-25 22:19:21 +00:00
.checkpatch.conf
.clang-format
.editorconfig Add .editorconfig file 2019-09-10 12:52:18 +00:00
.gitignore cbfstool: Build vboot library 2020-03-23 08:34:23 +00:00
.gitmodules submodules: Add 3rdparty/amd_blobs 2019-10-31 12:28:38 +00:00
.gitreview
AUTHORS AUTHORS, util/: Drop individual copyright notices 2020-05-09 21:21:32 +00:00
COPYING
MAINTAINERS MAINTAINERS: Add entry for mb/ocp/tiogapass 2020-05-11 08:34:49 +00:00
Makefile Makefile: Use SPDX identifier 2020-05-23 21:03:17 +00:00
Makefile.inc make: Add a target and dependency to parse the devicetree with sconfig 2020-05-22 01:50:11 +00:00
README.md README.md: Remove link to deprecated wiki 2019-11-16 20:39:55 +00:00
gnat.adc treewide: Remove "this file is part of" lines 2020-05-11 17:11:40 +00:00
toolchain.inc treewide: Remove "this file is part of" lines 2020-05-11 17:11:40 +00:00

README.md

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.