coreboot-kgpe-d16/targets/via/epia-m/Config.filo.lb

57 lines
1.4 KiB
Plaintext

# Sample config file for EPIA-M
# This will make a target directory of ./epia-m
target epia-m
mainboard via/epia-m
option CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
option CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
option CONFIG_CONSOLE_SERIAL8250=1
option CONFIG_ROM_SIZE=256*1024
option CONFIG_HAVE_OPTION_TABLE=1
option CONFIG_ROM_PAYLOAD=1
option CONFIG_HAVE_FALLBACK_BOOT=1
###
### Compute the location and size of where this firmware image
### (coreboot plus bootloader) will live in the boot rom chip.
###
option CONFIG_FALLBACK_SIZE=131072
## Coreboot C code runs at this location in RAM
option CONFIG_RAMBASE=0x00004000
#
###
### Compute the start location and size size of
### The coreboot bootloader.
###
#
# EPIA-M
#
romimage "normal"
option CONFIG_USE_FALLBACK_IMAGE=0
option CONFIG_ROM_IMAGE_SIZE=0x10000
option COREBOOT_EXTRA_VERSION=".0Normal"
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
# payload ../../../../tg3--ide_disk.zelf
# payload ../../../../../lnxieepro100.ebi
payload ../../../../../../filo.elf
end
romimage "fallback"
option CONFIG_USE_FALLBACK_IMAGE=1
option CONFIG_ROM_IMAGE_SIZE=0x10000
option COREBOOT_EXTRA_VERSION=".0Fallback"
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
# payload ../../../../tg3--ide_disk.zelf
# payload ../../../../../lnxieepro100.ebi
payload ../../../../../../filo.elf
end
buildrom ./coreboot.rom CONFIG_ROM_SIZE "normal" "fallback"