b0b99058cc
FSP 1263 looks for UPD configuration of "AudioLinkHda" if false it disables SDI# link for the codec. Change-Id: I8330f47416e580bf6b9ca1faed1de5cd578d0e2e Signed-off-by: Selma BENSAID <selma.bensaid@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35078 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
429 lines
11 KiB
C
429 lines
11 KiB
C
/*
|
|
* This file is part of the coreboot project.
|
|
*
|
|
* Copyright (C) 2007-2008 coresystems GmbH
|
|
* Copyright (C) 2014 Google Inc.
|
|
* Copyright (C) 2017-2019 Intel Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#ifndef _SOC_CHIP_H_
|
|
#define _SOC_CHIP_H_
|
|
|
|
#include <intelblocks/chip.h>
|
|
#include <drivers/i2c/designware/dw_i2c.h>
|
|
#include <intelblocks/gpio.h>
|
|
#include <intelblocks/gspi.h>
|
|
#include <smbios.h>
|
|
#include <stdint.h>
|
|
#include <soc/gpio.h>
|
|
#include <soc/pch.h>
|
|
#include <soc/pci_devs.h>
|
|
#include <soc/pm.h>
|
|
#include <soc/pmc.h>
|
|
#include <soc/serialio.h>
|
|
#include <soc/usb.h>
|
|
#include <soc/vr_config.h>
|
|
#if CONFIG(SOC_INTEL_CANNONLAKE_PCH_H)
|
|
#include <soc/gpio_defs_cnp_h.h>
|
|
#else
|
|
#include <soc/gpio_defs.h>
|
|
#endif
|
|
|
|
#define SOC_INTEL_CML_UART_DEV_MAX 3
|
|
|
|
struct soc_intel_cannonlake_config {
|
|
|
|
/* Common struct containing soc config data required by common code */
|
|
struct soc_intel_common_config common_soc_config;
|
|
|
|
/* GPE configuration */
|
|
uint32_t gpe0_en_1; /* GPE0_EN_31_0 */
|
|
uint32_t gpe0_en_2; /* GPE0_EN_63_32 */
|
|
uint32_t gpe0_en_3; /* GPE0_EN_95_64 */
|
|
uint32_t gpe0_en_4; /* GPE0_EN_127_96 / GPE_STD */
|
|
|
|
/* Gpio group routed to each dword of the GPE0 block. Values are
|
|
* of the form GPP_[A:G] or GPD. */
|
|
uint8_t gpe0_dw0; /* GPE0_31_0 STS/EN */
|
|
uint8_t gpe0_dw1; /* GPE0_63_32 STS/EN */
|
|
uint8_t gpe0_dw2; /* GPE0_95_64 STS/EN */
|
|
|
|
/* Generic IO decode ranges */
|
|
uint32_t gen1_dec;
|
|
uint32_t gen2_dec;
|
|
uint32_t gen3_dec;
|
|
uint32_t gen4_dec;
|
|
|
|
/* Enable S0iX support */
|
|
int s0ix_enable;
|
|
/* Enable DPTF support */
|
|
int dptf_enable;
|
|
|
|
/* Deep SX enable for both AC and DC */
|
|
int deep_s3_enable_ac;
|
|
int deep_s3_enable_dc;
|
|
int deep_s5_enable_ac;
|
|
int deep_s5_enable_dc;
|
|
|
|
/* Deep Sx Configuration
|
|
* DSX_EN_WAKE_PIN - Enable WAKE# pin
|
|
* DSX_EN_LAN_WAKE_PIN - Enable LAN_WAKE# pin
|
|
* DSX_DIS_AC_PRESENT_PD - Disable pull-down on AC_PRESENT pin */
|
|
uint32_t deep_sx_config;
|
|
|
|
/* TCC activation offset */
|
|
uint32_t tcc_offset;
|
|
|
|
uint64_t PlatformMemorySize;
|
|
uint8_t SmramMask;
|
|
uint8_t MrcFastBoot;
|
|
uint32_t TsegSize;
|
|
uint16_t MmioSize;
|
|
|
|
/* DDR Frequency Limit. Maximum Memory Frequency Selections in Mhz.
|
|
* Options : 1067, 1333, 1600, 1867, 2133, 2400, 2667, 2933, 0(Auto) */
|
|
uint16_t DdrFreqLimit;
|
|
|
|
/* SAGV Low Frequency Selections in Mhz.
|
|
* Options : 1067, 1333, 1600, 1867, 2133, 2400, 2667, 2933, 0(Auto) */
|
|
uint16_t FreqSaGvLow;
|
|
|
|
/* SAGV Mid Frequency Selections in Mhz.
|
|
* Options : 1067, 1333, 1600, 1867, 2133, 2400, 2667, 2933, 0(Auto) */
|
|
uint16_t FreqSaGvMid;
|
|
|
|
/* System Agent dynamic frequency support. Only effects ULX/ULT CPUs.
|
|
* For CNL, options are as following
|
|
* When enabled, memory will be training at three different frequencies.
|
|
* 0:Disabled, 1:FixedLow, 2:FixedMid, 3:FixedHigh, 4:Enabled
|
|
* For WHL/CFL/CML options are as following
|
|
* When enabled, memory will be training at two different frequencies.
|
|
* 0:Disabled, 1:FixedLow, 2:FixedHigh, 3:Enabled*/
|
|
enum {
|
|
SaGv_Disabled,
|
|
SaGv_FixedLow,
|
|
#if !CONFIG(SOC_INTEL_CANNONLAKE_ALTERNATE_HEADERS)
|
|
SaGv_FixedMid,
|
|
#endif
|
|
SaGv_FixedHigh,
|
|
SaGv_Enabled,
|
|
} SaGv;
|
|
|
|
|
|
/* Rank Margin Tool. 1:Enable, 0:Disable */
|
|
uint8_t RMT;
|
|
|
|
/* USB related */
|
|
struct usb2_port_config usb2_ports[16];
|
|
struct usb3_port_config usb3_ports[10];
|
|
uint8_t SsicPortEnable;
|
|
/* Wake Enable Bitmap for USB2 ports */
|
|
uint16_t usb2_wake_enable_bitmap;
|
|
/* Wake Enable Bitmap for USB3 ports */
|
|
uint16_t usb3_wake_enable_bitmap;
|
|
|
|
/* SATA related */
|
|
enum {
|
|
Sata_AHCI,
|
|
Sata_RAID,
|
|
} SataMode;
|
|
uint8_t SataSalpSupport;
|
|
uint8_t SataPortsEnable[8];
|
|
uint8_t SataPortsDevSlp[8];
|
|
|
|
/* Enable/Disable SLP_S0 with GBE Support. 0: disable, 1: enable */
|
|
uint8_t SlpS0WithGbeSupport;
|
|
/* SLP_S0 Voltage Margining Policy. 0: disable, 1: enable */
|
|
uint8_t PchPmSlpS0VmRuntimeControl;
|
|
/* SLP_S0 Voltage Margining 0.70V Policy. 0: disable, 1: enable */
|
|
uint8_t PchPmSlpS0Vm070VSupport;
|
|
/* SLP_S0 Voltage Margining 0.75V Policy. 0: disable, 1: enable */
|
|
uint8_t PchPmSlpS0Vm075VSupport;
|
|
|
|
/* Audio related */
|
|
uint8_t PchHdaDspEnable;
|
|
|
|
/* Enable/Disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1 */
|
|
uint8_t PchHdaAudioLinkHda;
|
|
uint8_t PchHdaIDispCodecDisconnect;
|
|
uint8_t PchHdaAudioLinkDmic0;
|
|
uint8_t PchHdaAudioLinkDmic1;
|
|
uint8_t PchHdaAudioLinkSsp0;
|
|
uint8_t PchHdaAudioLinkSsp1;
|
|
uint8_t PchHdaAudioLinkSsp2;
|
|
uint8_t PchHdaAudioLinkSndw1;
|
|
uint8_t PchHdaAudioLinkSndw2;
|
|
uint8_t PchHdaAudioLinkSndw3;
|
|
uint8_t PchHdaAudioLinkSndw4;
|
|
|
|
/* PCIe Root Ports */
|
|
uint8_t PcieRpEnable[CONFIG_MAX_ROOT_PORTS];
|
|
/* PCIe output clocks type to Pcie devices.
|
|
* 0-23: PCH rootport, 0x70: LAN, 0x80: unspecified but in use,
|
|
* 0xFF: not used */
|
|
uint8_t PcieClkSrcUsage[CONFIG_MAX_PCIE_CLOCKS];
|
|
/* PCIe ClkReq-to-ClkSrc mapping, number of clkreq signal assigned to
|
|
* clksrc. */
|
|
uint8_t PcieClkSrcClkReq[CONFIG_MAX_PCIE_CLOCKS];
|
|
/* PCIe LTR(Latency Tolerance Reporting) mechanism */
|
|
uint8_t PcieRpLtrEnable[CONFIG_MAX_ROOT_PORTS];
|
|
/* Enable/Disable HotPlug support for Root Port */
|
|
uint8_t PcieRpHotPlug[CONFIG_MAX_ROOT_PORTS];
|
|
|
|
/* eMMC and SD */
|
|
uint8_t ScsEmmcHs400Enabled;
|
|
/* Need to update DLL setting to get Emmc running at HS400 speed */
|
|
uint8_t EmmcHs400DllNeed;
|
|
/* 0-39: number of active delay for RX strobe, unit is 125 psec */
|
|
uint8_t EmmcHs400RxStrobeDll1;
|
|
/* 0-78: number of active delay for TX data, unit is 125 psec */
|
|
uint8_t EmmcHs400TxDataDll;
|
|
/* Enable/disable SD card write protect pin configuration on CML */
|
|
uint8_t ScsSdCardWpPinEnabled;
|
|
|
|
/* Integrated Sensor */
|
|
uint8_t PchIshEnable;
|
|
|
|
/* Heci related */
|
|
uint8_t Heci3Enabled;
|
|
|
|
/* Gfx related */
|
|
uint8_t IgdDvmt50PreAlloc;
|
|
uint8_t InternalGfx;
|
|
uint8_t SkipExtGfxScan;
|
|
|
|
uint32_t GraphicsConfigPtr;
|
|
uint8_t Device4Enable;
|
|
|
|
/* GPIO IRQ Select. The valid value is 14 or 15 */
|
|
uint8_t GpioIrqRoute;
|
|
/* SCI IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23 */
|
|
uint8_t SciIrqSelect;
|
|
/* TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23 */
|
|
uint8_t TcoIrqSelect;
|
|
uint8_t TcoIrqEnable;
|
|
|
|
/* VrConfig Settings for 5 domains
|
|
* 0 = System Agent, 1 = IA Core, 2 = Ring,
|
|
* 3 = GT unsliced, 4 = GT sliced */
|
|
struct vr_config domain_vr_config[NUM_VR_DOMAINS];
|
|
/* HeciEnabled decides the state of Heci1 at end of boot
|
|
* Setting to 0 (default) disables Heci1 and hides the device from OS */
|
|
uint8_t HeciEnabled;
|
|
|
|
/* PL1 Override value in Watts */
|
|
uint32_t tdp_pl1_override;
|
|
/* PL2 Override value in Watts */
|
|
uint32_t tdp_pl2_override;
|
|
/* SysPL2 Value in Watts */
|
|
uint32_t tdp_psyspl2;
|
|
/* SysPL3 Value in Watts */
|
|
uint32_t tdp_psyspl3;
|
|
/* SysPL3 window size */
|
|
uint32_t tdp_psyspl3_time;
|
|
/* SysPL3 duty cycle */
|
|
uint32_t tdp_psyspl3_dutycycle;
|
|
/* PL4 Value in Watts */
|
|
uint32_t tdp_pl4;
|
|
/* Estimated maximum platform power in Watts */
|
|
uint16_t psys_pmax;
|
|
|
|
/* Intel Speed Shift Technology */
|
|
uint8_t speed_shift_enable;
|
|
/* Enable VR specific mailbox command
|
|
* 00b - no VR specific cmd sent
|
|
* 01b - VR mailbox cmd specifically for the MPS IMPV8 VR will be sent
|
|
* 10b - VR specific cmd sent for PS4 exit issue
|
|
* 11b - Reserved */
|
|
uint8_t SendVrMbxCmd;
|
|
|
|
/* Enable/Disable EIST. 1b:Enabled, 0b:Disabled */
|
|
uint8_t eist_enable;
|
|
|
|
/* Enable C6 DRAM */
|
|
uint8_t enable_c6dram;
|
|
/*
|
|
* PRMRR size setting with below options
|
|
* 0x00100000 - 1MiB
|
|
* 0x02000000 - 32MiB and beyond
|
|
*/
|
|
uint32_t PrmrrSize;
|
|
uint8_t PmTimerDisabled;
|
|
|
|
/*
|
|
* SLP_S3 Minimum Assertion Width Policy
|
|
* 1 = 60us
|
|
* 2 = 1ms (default)
|
|
* 3 = 50ms
|
|
* 4 = 2s
|
|
*/
|
|
uint8_t PchPmSlpS3MinAssert;
|
|
|
|
/*
|
|
* SLP_S4 Minimum Assertion Width Policy
|
|
* 1 = 1s
|
|
* 2 = 2s
|
|
* 3 = 3s
|
|
* 4 = 4s (default)
|
|
*/
|
|
uint8_t PchPmSlpS4MinAssert;
|
|
|
|
/*
|
|
* SLP_SUS Minimum Assertion Width Policy
|
|
* 1 = 0ms
|
|
* 2 = 500ms
|
|
* 3 = 1s (default)
|
|
* 4 = 4s
|
|
*/
|
|
uint8_t PchPmSlpSusMinAssert;
|
|
|
|
/*
|
|
* SLP_A Minimum Assertion Width Policy
|
|
* 1 = 0ms
|
|
* 2 = 4s
|
|
* 3 = 98ms (default)
|
|
* 4 = 2s
|
|
*/
|
|
uint8_t PchPmSlpAMinAssert;
|
|
|
|
/*
|
|
* SerialIO device mode selection:
|
|
*
|
|
* Device index:
|
|
* PchSerialIoIndexI2C0
|
|
* PchSerialIoIndexI2C1
|
|
* PchSerialIoIndexI2C2
|
|
* PchSerialIoIndexI2C3
|
|
* PchSerialIoIndexI2C4
|
|
* PchSerialIoIndexI2C5
|
|
* PchSerialIoIndexSPI0
|
|
* PchSerialIoIndexSPI1
|
|
* PchSerialIoIndexSPI2
|
|
* PchSerialIoIndexUART0
|
|
* PchSerialIoIndexUART1
|
|
* PchSerialIoIndexUART2
|
|
*
|
|
* Mode select:
|
|
* For Cannonlake PCH following values are supported:
|
|
* PchSerialIoNotInitialized
|
|
* PchSerialIoDisabled
|
|
* PchSerialIoPci
|
|
* PchSerialIoAcpi
|
|
* PchSerialIoHidden
|
|
* PchSerialIoMax
|
|
*
|
|
* For Cometlake following values are supported:
|
|
* PchSerialIoNotInitialized
|
|
* PchSerialIoDisabled,
|
|
* PchSerialIoPci,
|
|
* PchSerialIoHidden,
|
|
* PchSerialIoLegacyUart,
|
|
* PchSerialIoSkipInit,
|
|
* PchSerialIoMax
|
|
*
|
|
* NOTE:
|
|
* PchSerialIoNotInitialized is not an option provided by FSP, this
|
|
* option is default selected in case devicetree doesn't fill this param
|
|
* In case PchSerialIoNotInitialized is selected or an invalid value is
|
|
* provided from devicetree, coreboot will configure device into PCI
|
|
* mode by default.
|
|
*
|
|
*/
|
|
uint8_t SerialIoDevMode[PchSerialIoIndexMAX];
|
|
|
|
/* GPIO SD card detect pin */
|
|
unsigned int sdcard_cd_gpio;
|
|
|
|
/* Enable Pch iSCLK */
|
|
uint8_t pch_isclk;
|
|
|
|
/*
|
|
* Acoustic Noise Mitigation
|
|
* 0b - Disable
|
|
* 1b - Enable noise mitigation
|
|
*/
|
|
uint8_t AcousticNoiseMitigation;
|
|
|
|
/*
|
|
* Disable Fast Package C-state ramping
|
|
* Need to set AcousticNoiseMitigation = '1' first
|
|
* 0b - Enabled
|
|
* 1b - Disabled
|
|
*/
|
|
uint8_t FastPkgCRampDisableIa;
|
|
uint8_t FastPkgCRampDisableGt;
|
|
uint8_t FastPkgCRampDisableSa;
|
|
uint8_t FastPkgCRampDisableFivr;
|
|
|
|
/*
|
|
* Adjust the VR slew rates
|
|
* Need to set AcousticNoiseMitigation = '1' first
|
|
* 000b - Fast/2
|
|
* 001b - Fast/4
|
|
* 010b - Fast/8
|
|
* 011b - Fast/16
|
|
*/
|
|
uint8_t SlowSlewRateForIa;
|
|
uint8_t SlowSlewRateForGt;
|
|
uint8_t SlowSlewRateForSa;
|
|
uint8_t SlowSlewRateForFivr;
|
|
|
|
/* DMI Power Optimizer */
|
|
uint8_t dmipwroptimize;
|
|
|
|
/* SATA Power Optimizer */
|
|
uint8_t satapwroptimize;
|
|
|
|
/* Enable or disable eDP device */
|
|
uint8_t DdiPortEdp;
|
|
|
|
/* Enable or disable HPD of DDI port B/C/D/F */
|
|
uint8_t DdiPortBHpd;
|
|
uint8_t DdiPortCHpd;
|
|
uint8_t DdiPortDHpd;
|
|
uint8_t DdiPortFHpd;
|
|
|
|
/* Enable or disable DDC of DDI port B/C/D/F */
|
|
uint8_t DdiPortBDdc;
|
|
uint8_t DdiPortCDdc;
|
|
uint8_t DdiPortDDdc;
|
|
uint8_t DdiPortFDdc;
|
|
|
|
/* Unlock all GPIO Pads */
|
|
uint8_t PchUnlockGpioPads;
|
|
|
|
/* Enable GBE wakeup */
|
|
uint8_t LanWakeFromDeepSx;
|
|
uint8_t WolEnableOverride;
|
|
|
|
/*
|
|
* Override GPIO PM configuration:
|
|
* 0: Use FSP default GPIO PM program,
|
|
* 1: coreboot to override GPIO PM program
|
|
*/
|
|
uint8_t gpio_override_pm;
|
|
/*
|
|
* GPIO PM configuration: 0 to disable, 1 to enable power gating
|
|
* Bit 6-7: Reserved
|
|
* Bit 5: MISCCFG_GPSIDEDPCGEN
|
|
* Bit 4: MISCCFG_GPRCOMPCDLCGEN
|
|
* Bit 3: MISCCFG_GPRTCDLCGEN
|
|
* Bit 2: MISCCFG_GSXLCGEN
|
|
* Bit 1: MISCCFG_GPDPCGEN
|
|
* Bit 0: MISCCFG_GPDLCGEN
|
|
*/
|
|
uint8_t gpio_pm[TOTAL_GPIO_COMM];
|
|
};
|
|
|
|
typedef struct soc_intel_cannonlake_config config_t;
|
|
|
|
#endif
|