c761f28171
RT1011 is a smart amplifier. It needs to know speaker related parameters including speaker resistor value and temperature when the calibration is done in order to run Dynamic Speaker Management (DSM) algorithm on chip. The purpose of DSM is to protect speaker when the volume is large. The calibration data of speaker is stored in VPD in factory. This driver is needed to read data from VPD and write to ACPI _DSD when config CHROMEOS_DSM_CALIB is turned on. Kernel rt1011 codec driver will read these device properties to set up codec accordingly on boot. The reason to prepare these parameters in coreboot is because kernel codec driver expects to read per-device parameters directly from device properties. Another benefit is that other OS can also take these parameters through ACPI _DSD table and take benefit of DSM on RT1011. The kernel driver device properties of RT1011 are documented at linux/Documentation/devicetree/bindings/sound/rt1011.txt It is currently in ASoC maintainer's tree at https://kernel.googlesource.com/pub/scm/linux/kernel/git/broonie/sound/+/for-next/ and hopefully should be merged to mainline kernel in the next merge window. BUG=b:140397934 BRANCH=none TEST=On Helios, with patch series, check realtek,r0_calib and realtek,temperature_calib are available to rt1011 codec driver. Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Change-Id: I9550b9890ce2cae787f4f17779a5ade77f619171 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> |
||
|---|---|---|
| 3rdparty | ||
| Documentation | ||
| configs | ||
| payloads | ||
| src | ||
| util | ||
| .checkpatch.conf | ||
| .clang-format | ||
| .editorconfig | ||
| .gitignore | ||
| .gitmodules | ||
| .gitreview | ||
| AUTHORS | ||
| COPYING | ||
| MAINTAINERS | ||
| Makefile | ||
| Makefile.inc | ||
| README.md | ||
| gnat.adc | ||
| toolchain.inc | ||
README.md
coreboot README
coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.
With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.
coreboot was formerly known as LinuxBIOS.
Payloads
After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.
See https://www.coreboot.org/Payloads for a list of supported payloads.
Supported Hardware
coreboot supports a wide range of chipsets, devices, and mainboards.
For details please consult:
- https://www.coreboot.org/Supported_Motherboards
- https://www.coreboot.org/Supported_Chipsets_and_Devices
Build Requirements
- make
- gcc / g++
Because Linux distribution compilers tend to use lots of patches. coreboot
does lots of "unusual" things in its build system, some of which break due
to those patches, sometimes by gcc aborting, sometimes - and that's worse -
by generating broken object code.
Two options: use our toolchain (eg. make crosstools-i386) or enable the
ANY_TOOLCHAINKconfig option if you're feeling lucky (no support in this case). - iasl (for targets with ACPI support)
- pkg-config
- libssl-dev (openssl)
Optional:
- doxygen (for generating/viewing documentation)
- gdb (for better debugging facilities on some targets)
- ncurses (for
make menuconfigandmake nconfig) - flex and bison (for regenerating parsers)
Building coreboot
Please consult https://www.coreboot.org/Build_HOWTO for details.
Testing coreboot Without Modifying Your Hardware
If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.
Please see https://www.coreboot.org/QEMU for details.
Website and Mailing List
Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:
You can contact us directly on the coreboot mailing list:
https://www.coreboot.org/Mailinglist
Copyright and License
The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.
coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.
This makes the resulting coreboot images licensed under the GPL, version 2.