Go to file
Rocky Phagura cced3469c5 soc/intel/xeon_sp: Enable PMC support
PMC support was not enabled on Xeon_sp platforms. This involves turning
on SOC_INTEL_COMMON_BLOCK_PMC and then adding the proper hooks in SOC
specific code.  This patch leverages code from the Skylake project and
adds the bare minimum hooks to leverage PMC common code. Most
importantly this enables power management registers located in the PMC
device (under ACPI_BASE_ADDRESS). Access to this device is also needed
for SMM setup and handling.

TEST=build for Tiogapass and enable the following Kconfig options:
	select SOC_INTEL_COMMON_BLOCK_PMC
	select ACPI_INTEL_HARDWARE_SLEEP_VALUES
        select CPU_INTEL_COMMON_SMM

Boot the system and ensure pmbase is programmed. (Look for pmbase in
debug messages). Secondly check that SMIs are enabled by looking at the
debug messages (search for "Enabling SMIs") and verifying in HW by
reading IO port 0x530.

Change-Id: I6d57a8282a8b6dc4314f156c39deb09535575cbd
Signed-off-by: Rocky Phagura <rphagura@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-09-21 08:06:23 +00:00
3rdparty Update amd_blobs submodule to upstream master 2020-09-17 19:46:18 +00:00
Documentation Documentation: Add ASan documentation 2020-09-21 07:45:37 +00:00
LICENSES drivers: Use SPDX identifiers 2020-05-25 22:19:21 +00:00
configs configs: Build test experimental x86_64 code 2020-08-19 10:54:45 +00:00
payloads libpayload: free: Separate NULL check out for clarity 2020-09-19 01:36:57 +00:00
src soc/intel/xeon_sp: Enable PMC support 2020-09-21 08:06:23 +00:00
tests device/dram: Add method for converting MHz to MT/s 2020-09-16 03:24:50 +00:00
util lint: check for misuse of Kconfig SUBSYSTEM_*_ID 2020-09-20 17:03:32 +00:00
.checkpatch.conf
.clang-format
.editorconfig
.gitignore util: update .gitignore to ignore spd_tools binaries 2020-09-02 07:17:55 +00:00
.gitmodules 3rdparty: Add submodule intel-sec-tools 2020-09-09 13:08:25 +00:00
.gitreview
AUTHORS
COPYING
MAINTAINERS MAINTAINERS: Update soc/mediatek maintainership 2020-08-26 07:35:21 +00:00
Makefile build system: Rely on xcompile for HOSTCC and HOSTCXX 2020-07-08 08:53:46 +00:00
Makefile.inc sconfig: Switch to getopt 2020-09-18 17:50:00 +00:00
README.md
gnat.adc
toolchain.inc

README.md

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.