755db95d1a
The dependencies of CONSOLE_SERIAL and DRIVERS_UART were somehow backwards. Fix that. Now, CONSOLE_SERIAL depends on DRIVERS_UART, because it's using its interface. The individual UART drivers select DRIVERS_UART, because they implement the interface and depend on the common UART code. Some guards had to be fixed (using CONSOLE_SERIAL now instead of DRIVERS_UART). Some other guards that were only about compilation of units were removed. We want to build test as much as possible, right? Change-Id: I0ea73a8909f07202b23c88db93df74cf9dc8abf9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
72 lines
2.2 KiB
C
72 lines
2.2 KiB
C
/*
|
|
* This file is part of the coreboot project.
|
|
*
|
|
* Copyright 2014 Rockchip Inc.
|
|
* Copyright 2014 Google Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <arch/io.h>
|
|
#include <assert.h>
|
|
#include <bootblock_common.h>
|
|
#include <delay.h>
|
|
#include <reset.h>
|
|
#include <soc/clock.h>
|
|
#include <soc/i2c.h>
|
|
#include <soc/grf.h>
|
|
#include <soc/pmu.h>
|
|
#include <soc/rk808.h>
|
|
#include <soc/spi.h>
|
|
#include <vendorcode/google/chromeos/chromeos.h>
|
|
|
|
#include "board.h"
|
|
|
|
void bootblock_mainboard_early_init()
|
|
{
|
|
if (IS_ENABLED(CONFIG_CONSOLE_SERIAL)) {
|
|
assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE);
|
|
write32(&rk3288_grf->iomux_uart2, IOMUX_UART2);
|
|
}
|
|
}
|
|
|
|
void bootblock_mainboard_init(void)
|
|
{
|
|
if (rkclk_was_watchdog_reset())
|
|
reboot_from_watchdog();
|
|
|
|
/* Turn on all leds */
|
|
gpio_output(GPIO(7, A, 0), 1); /* LED_READY */
|
|
gpio_output(GPIO(7, B, 5), 1); /* Ready2_LED */
|
|
gpio_output(GPIO(7, B, 3), 1); /* LED_SYNCING */
|
|
gpio_output(GPIO(7, B, 7), 1); /* LED_ERROR */
|
|
|
|
/* Up VDD_CPU (BUCK1) to 1.4V to support max CPU frequency (1.8GHz). */
|
|
setbits_le32(&rk3288_pmu->iomux_i2c0scl, IOMUX_I2C0SCL);
|
|
setbits_le32(&rk3288_pmu->iomux_i2c0sda, IOMUX_I2C0SDA);
|
|
assert(CONFIG_PMIC_BUS == 0); /* must correspond with IOMUX */
|
|
i2c_init(CONFIG_PMIC_BUS, 400*KHz);
|
|
|
|
/* Slowly raise to max CPU voltage to prevent overshoot */
|
|
rk808_configure_buck(1, 1200);
|
|
udelay(175);/* Must wait for voltage to stabilize,2mV/us */
|
|
rkclk_configure_cpu(APLL_1416_MHZ);
|
|
|
|
/* i2c1 for tpm */
|
|
write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1);
|
|
i2c_init(1, 400*KHz);
|
|
|
|
/* spi2 for firmware ROM */
|
|
write32(&rk3288_grf->iomux_spi2csclk, IOMUX_SPI2_CSCLK);
|
|
write32(&rk3288_grf->iomux_spi2txrx, IOMUX_SPI2_TXRX);
|
|
rockchip_spi_init(CONFIG_BOOT_DEVICE_SPI_FLASH_BUS, 24750*KHz);
|
|
|
|
setup_chromeos_gpios();
|
|
}
|