697 lines
18 KiB
C
697 lines
18 KiB
C
/*
|
|
* This file is part of the libpayload project.
|
|
*
|
|
* Copyright (C) 2008-2010 coresystems GmbH
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
//#define USB_DEBUG
|
|
|
|
#include <libpayload-config.h>
|
|
#include <usb/usb.h>
|
|
|
|
#define DR_DESC gen_bmRequestType(device_to_host, standard_type, dev_recp)
|
|
|
|
hci_t *usb_hcs = 0;
|
|
|
|
hci_t *
|
|
new_controller (void)
|
|
{
|
|
hci_t *controller = xzalloc(sizeof (hci_t));
|
|
controller->next = usb_hcs;
|
|
usb_hcs = controller;
|
|
return controller;
|
|
}
|
|
|
|
void
|
|
detach_controller (hci_t *controller)
|
|
{
|
|
if (controller == NULL)
|
|
return;
|
|
|
|
usb_detach_device(controller, 0); /* tear down root hub tree */
|
|
|
|
if (usb_hcs == controller) {
|
|
usb_hcs = controller->next;
|
|
} else {
|
|
hci_t *it = usb_hcs;
|
|
while (it != NULL) {
|
|
if (it->next == controller) {
|
|
it->next = controller->next;
|
|
return;
|
|
}
|
|
it = it->next;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Shut down all controllers
|
|
*/
|
|
int
|
|
usb_exit (void)
|
|
{
|
|
while (usb_hcs != NULL) {
|
|
usb_hcs->shutdown(usb_hcs);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Polls all hubs on all USB controllers, to find out about device changes
|
|
*/
|
|
void
|
|
usb_poll (void)
|
|
{
|
|
if (usb_hcs == 0)
|
|
return;
|
|
hci_t *controller = usb_hcs;
|
|
while (controller != NULL) {
|
|
int i;
|
|
for (i = 0; i < 128; i++) {
|
|
if (controller->devices[i] != 0) {
|
|
controller->devices[i]->poll (controller->devices[i]);
|
|
}
|
|
}
|
|
controller = controller->next;
|
|
}
|
|
}
|
|
|
|
usbdev_t *
|
|
init_device_entry (hci_t *controller, int i)
|
|
{
|
|
usbdev_t *dev = calloc(1, sizeof(usbdev_t));
|
|
if (!dev) {
|
|
usb_debug("no memory to allocate device structure\n");
|
|
return NULL;
|
|
}
|
|
if (controller->devices[i] != 0)
|
|
usb_debug("warning: device %d reassigned?\n", i);
|
|
controller->devices[i] = dev;
|
|
dev->controller = controller;
|
|
dev->address = -1;
|
|
dev->hub = -1;
|
|
dev->port = -1;
|
|
dev->init = usb_nop_init;
|
|
dev->init (controller->devices[i]);
|
|
return dev;
|
|
}
|
|
|
|
int
|
|
set_feature (usbdev_t *dev, int endp, int feature, int rtype)
|
|
{
|
|
dev_req_t dr;
|
|
|
|
dr.bmRequestType = rtype;
|
|
dr.data_dir = host_to_device;
|
|
dr.bRequest = SET_FEATURE;
|
|
dr.wValue = feature;
|
|
dr.wIndex = endp;
|
|
dr.wLength = 0;
|
|
|
|
return dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0);
|
|
}
|
|
|
|
int
|
|
get_status (usbdev_t *dev, int intf, int rtype, int len, void *data)
|
|
{
|
|
dev_req_t dr;
|
|
|
|
dr.bmRequestType = rtype;
|
|
dr.data_dir = device_to_host;
|
|
dr.bRequest = GET_STATUS;
|
|
dr.wValue = 0;
|
|
dr.wIndex = intf;
|
|
dr.wLength = len;
|
|
|
|
return dev->controller->control (dev, IN, sizeof (dr), &dr, len, data);
|
|
}
|
|
|
|
/*
|
|
* Certain Lexar / Micron USB 2.0 disks will fail the get_descriptor(DT_CFG)
|
|
* call due to timing issues. Work around this by making extra attempts on
|
|
* failure.
|
|
*/
|
|
#define GET_DESCRIPTOR_TRIES 3
|
|
|
|
int
|
|
get_descriptor(usbdev_t *dev, int rtype, int desc_type, int desc_idx,
|
|
void *data, size_t len)
|
|
{
|
|
dev_req_t dr;
|
|
int fail_tries = 0;
|
|
int ret = 0;
|
|
|
|
while (fail_tries++ < GET_DESCRIPTOR_TRIES) {
|
|
dr.bmRequestType = rtype;
|
|
dr.bRequest = GET_DESCRIPTOR;
|
|
dr.wValue = desc_type << 8 | desc_idx;
|
|
dr.wIndex = 0;
|
|
dr.wLength = len;
|
|
|
|
ret = dev->controller->control(dev, IN,
|
|
sizeof(dr), &dr, len, data);
|
|
if (ret)
|
|
udelay(10);
|
|
else
|
|
return 0;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
int
|
|
set_configuration (usbdev_t *dev)
|
|
{
|
|
dev_req_t dr;
|
|
|
|
dr.bmRequestType = 0;
|
|
dr.bRequest = SET_CONFIGURATION;
|
|
dr.wValue = dev->configuration->bConfigurationValue;
|
|
dr.wIndex = 0;
|
|
dr.wLength = 0;
|
|
|
|
return dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0);
|
|
}
|
|
|
|
int
|
|
clear_feature (usbdev_t *dev, int endp, int feature, int rtype)
|
|
{
|
|
dev_req_t dr;
|
|
|
|
dr.bmRequestType = rtype;
|
|
dr.data_dir = host_to_device;
|
|
dr.bRequest = CLEAR_FEATURE;
|
|
dr.wValue = feature;
|
|
dr.wIndex = endp;
|
|
dr.wLength = 0;
|
|
|
|
return dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0) < 0;
|
|
}
|
|
|
|
int
|
|
clear_stall (endpoint_t *ep)
|
|
{
|
|
int ret = clear_feature (ep->dev, ep->endpoint, ENDPOINT_HALT,
|
|
gen_bmRequestType (host_to_device, standard_type, endp_recp));
|
|
ep->toggle = 0;
|
|
return ret;
|
|
}
|
|
|
|
/* returns free address or -1 */
|
|
static int
|
|
get_free_address (hci_t *controller)
|
|
{
|
|
int i = controller->latest_address + 1;
|
|
for (; i != controller->latest_address; i++) {
|
|
if (i >= ARRAY_SIZE(controller->devices) || i < 1) {
|
|
usb_debug("WARNING: Device addresses for controller %#x"
|
|
" wrapped around!\n", controller->reg_base);
|
|
i = 0;
|
|
continue;
|
|
}
|
|
if (controller->devices[i] == 0) {
|
|
controller->latest_address = i;
|
|
return i;
|
|
}
|
|
}
|
|
usb_debug ("no free address found\n");
|
|
return -1; // no free address
|
|
}
|
|
|
|
int
|
|
usb_decode_mps0(usb_speed speed, u8 bMaxPacketSize0)
|
|
{
|
|
switch (speed) {
|
|
case LOW_SPEED:
|
|
if (bMaxPacketSize0 != 8) {
|
|
usb_debug("Invalid MPS0: 0x%02x\n", bMaxPacketSize0);
|
|
bMaxPacketSize0 = 8;
|
|
}
|
|
return bMaxPacketSize0;
|
|
case FULL_SPEED:
|
|
switch (bMaxPacketSize0) {
|
|
case 8: case 16: case 32: case 64:
|
|
return bMaxPacketSize0;
|
|
default:
|
|
usb_debug("Invalid MPS0: 0x%02x\n", bMaxPacketSize0);
|
|
return 8;
|
|
}
|
|
case HIGH_SPEED:
|
|
if (bMaxPacketSize0 != 64) {
|
|
usb_debug("Invalid MPS0: 0x%02x\n", bMaxPacketSize0);
|
|
bMaxPacketSize0 = 64;
|
|
}
|
|
return bMaxPacketSize0;
|
|
case SUPER_SPEED:
|
|
if (bMaxPacketSize0 != 9) {
|
|
usb_debug("Invalid MPS0: 0x%02x\n", bMaxPacketSize0);
|
|
bMaxPacketSize0 = 9;
|
|
}
|
|
return 1 << bMaxPacketSize0;
|
|
default: /* GCC is stupid and cannot deal with enums correctly */
|
|
return 8;
|
|
}
|
|
}
|
|
|
|
/* Normalize bInterval to log2 of microframes */
|
|
static int
|
|
usb_decode_interval(usb_speed speed, const endpoint_type type, const unsigned char bInterval)
|
|
{
|
|
#define LOG2(a) ((sizeof(unsigned) << 3) - __builtin_clz(a) - 1)
|
|
switch (speed) {
|
|
case LOW_SPEED:
|
|
switch (type) {
|
|
case ISOCHRONOUS: case INTERRUPT:
|
|
return LOG2(bInterval) + 3;
|
|
default:
|
|
return 0;
|
|
}
|
|
case FULL_SPEED:
|
|
switch (type) {
|
|
case ISOCHRONOUS:
|
|
return (bInterval - 1) + 3;
|
|
case INTERRUPT:
|
|
return LOG2(bInterval) + 3;
|
|
default:
|
|
return 0;
|
|
}
|
|
case HIGH_SPEED:
|
|
switch (type) {
|
|
case ISOCHRONOUS: case INTERRUPT:
|
|
return bInterval - 1;
|
|
default:
|
|
return LOG2(bInterval);
|
|
}
|
|
case SUPER_SPEED:
|
|
switch (type) {
|
|
case ISOCHRONOUS: case INTERRUPT:
|
|
return bInterval - 1;
|
|
default:
|
|
return 0;
|
|
}
|
|
default:
|
|
return 0;
|
|
}
|
|
#undef LOG2
|
|
}
|
|
|
|
usbdev_t *
|
|
generic_set_address (hci_t *controller, usb_speed speed,
|
|
int hubport, int hubaddr)
|
|
{
|
|
int adr = get_free_address (controller); // address to set
|
|
dev_req_t dr;
|
|
|
|
memset (&dr, 0, sizeof (dr));
|
|
dr.data_dir = host_to_device;
|
|
dr.req_type = standard_type;
|
|
dr.req_recp = dev_recp;
|
|
dr.bRequest = SET_ADDRESS;
|
|
dr.wValue = adr;
|
|
dr.wIndex = 0;
|
|
dr.wLength = 0;
|
|
|
|
usbdev_t *dev = init_device_entry(controller, adr);
|
|
if (!dev)
|
|
return NULL;
|
|
|
|
// dummy values for registering the address
|
|
dev->address = 0;
|
|
dev->hub = hubaddr;
|
|
dev->port = hubport;
|
|
dev->speed = speed;
|
|
dev->endpoints[0].dev = dev;
|
|
dev->endpoints[0].endpoint = 0;
|
|
dev->endpoints[0].maxpacketsize = 8;
|
|
dev->endpoints[0].toggle = 0;
|
|
dev->endpoints[0].direction = SETUP;
|
|
dev->endpoints[0].type = CONTROL;
|
|
if (dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0) < 0) {
|
|
usb_debug ("set_address failed\n");
|
|
usb_detach_device (controller, adr);
|
|
return NULL;
|
|
}
|
|
mdelay (SET_ADDRESS_MDELAY);
|
|
|
|
u8 buf[8];
|
|
dev->address = adr;
|
|
if (get_descriptor (dev, DR_DESC, DT_DEV, 0, buf, sizeof(buf))
|
|
!= sizeof(buf)) {
|
|
usb_debug("first get_descriptor(DT_DEV) failed\n");
|
|
usb_detach_device (controller, adr);
|
|
return NULL;
|
|
}
|
|
dev->endpoints[0].maxpacketsize = usb_decode_mps0(speed, buf[7]);
|
|
|
|
return dev;
|
|
}
|
|
|
|
static int
|
|
set_address (hci_t *controller, usb_speed speed, int hubport, int hubaddr)
|
|
{
|
|
usbdev_t *dev = controller->set_address(controller, speed,
|
|
hubport, hubaddr);
|
|
if (!dev) {
|
|
usb_debug ("set_address failed\n");
|
|
return -1;
|
|
}
|
|
|
|
dev->descriptor = malloc(sizeof(*dev->descriptor));
|
|
if (!dev->descriptor || get_descriptor (dev, DR_DESC, DT_DEV, 0,
|
|
dev->descriptor, sizeof(*dev->descriptor))
|
|
!= sizeof(*dev->descriptor)) {
|
|
usb_debug ("get_descriptor(DT_DEV) failed\n");
|
|
usb_detach_device (controller, dev->address);
|
|
return -1;
|
|
}
|
|
|
|
usb_debug ("* found device (0x%04x:0x%04x, USB %x.%x, MPS0: %d)\n",
|
|
dev->descriptor->idVendor, dev->descriptor->idProduct,
|
|
dev->descriptor->bcdUSB >> 8, dev->descriptor->bcdUSB & 0xff,
|
|
dev->endpoints[0].maxpacketsize);
|
|
dev->quirks = usb_quirk_check(dev->descriptor->idVendor,
|
|
dev->descriptor->idProduct);
|
|
|
|
usb_debug ("device has %d configurations\n",
|
|
dev->descriptor->bNumConfigurations);
|
|
if (dev->descriptor->bNumConfigurations == 0) {
|
|
/* device isn't usable */
|
|
usb_debug ("... no usable configuration!\n");
|
|
usb_detach_device (controller, dev->address);
|
|
return -1;
|
|
}
|
|
|
|
u16 buf[2];
|
|
if (get_descriptor (dev, DR_DESC, DT_CFG, 0, buf, sizeof(buf))
|
|
!= sizeof(buf)) {
|
|
usb_debug ("first get_descriptor(DT_CFG) failed\n");
|
|
usb_detach_device (controller, dev->address);
|
|
return -1;
|
|
}
|
|
/* workaround for some USB devices: wait until they're ready, or
|
|
* they send a NAK when they're not allowed to do. 1ms is enough */
|
|
mdelay(1);
|
|
dev->configuration = malloc(buf[1]);
|
|
if (!dev->configuration) {
|
|
usb_debug ("could not allocate %d bytes for DT_CFG\n", buf[1]);
|
|
usb_detach_device (controller, dev->address);
|
|
return -1;
|
|
}
|
|
if (get_descriptor (dev, DR_DESC, DT_CFG, 0, dev->configuration,
|
|
buf[1]) != buf[1]) {
|
|
usb_debug ("get_descriptor(DT_CFG) failed\n");
|
|
usb_detach_device (controller, dev->address);
|
|
return -1;
|
|
}
|
|
configuration_descriptor_t *cd = dev->configuration;
|
|
if (cd->wTotalLength != buf[1]) {
|
|
usb_debug ("configuration descriptor size changed, aborting\n");
|
|
usb_detach_device (controller, dev->address);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* If the device is not well known (ifnum == -1), we use the first
|
|
* interface we encounter, as there was no need to implement something
|
|
* else for the time being. If you need it, see the SetInterface and
|
|
* GetInterface functions in the USB specification and set it yourself.
|
|
*/
|
|
usb_debug ("device has %x interfaces\n", cd->bNumInterfaces);
|
|
int ifnum = usb_interface_check(dev->descriptor->idVendor,
|
|
dev->descriptor->idProduct);
|
|
if (cd->bNumInterfaces > 1 && ifnum < 0)
|
|
usb_debug ("NOTICE: Your device has multiple interfaces and\n"
|
|
"this driver will only use the first one. That may\n"
|
|
"be the wrong choice and cause the device to not\n"
|
|
"work correctly. Please report this case\n"
|
|
"(including the above debugging output) to\n"
|
|
"coreboot@coreboot.org to have the device added to\n"
|
|
"the list of well-known quirks.\n");
|
|
|
|
u8 *end = (void *)dev->configuration + cd->wTotalLength;
|
|
interface_descriptor_t *intf;
|
|
u8 *ptr;
|
|
|
|
/* Find our interface (or the first good one if we don't know) */
|
|
for (ptr = (void *)dev->configuration + sizeof(*cd); ; ptr += ptr[0]) {
|
|
if (ptr + 2 > end || !ptr[0] || ptr + ptr[0] > end) {
|
|
usb_debug ("Couldn't find usable DT_INTF\n");
|
|
usb_detach_device (controller, dev->address);
|
|
return -1;
|
|
}
|
|
if (ptr[1] != DT_INTF)
|
|
continue;
|
|
intf = (void *)ptr;
|
|
if (intf->bLength != sizeof(*intf)) {
|
|
usb_debug ("Skipping broken DT_INTF\n");
|
|
continue;
|
|
}
|
|
if (ifnum >= 0 && intf->bInterfaceNumber != ifnum)
|
|
continue;
|
|
usb_debug ("Interface %d: class 0x%x, sub 0x%x. proto 0x%x\n",
|
|
intf->bInterfaceNumber, intf->bInterfaceClass,
|
|
intf->bInterfaceSubClass, intf->bInterfaceProtocol);
|
|
ptr += sizeof(*intf);
|
|
break;
|
|
}
|
|
|
|
/* Gather up all endpoints belonging to this inteface */
|
|
dev->num_endp = 1;
|
|
for (; ptr + 2 <= end && ptr[0] && ptr + ptr[0] <= end; ptr += ptr[0]) {
|
|
if (ptr[1] == DT_INTF || ptr[1] == DT_CFG ||
|
|
dev->num_endp >= ARRAY_SIZE(dev->endpoints))
|
|
break;
|
|
if (ptr[1] != DT_ENDP)
|
|
continue;
|
|
|
|
endpoint_descriptor_t *desc = (void *)ptr;
|
|
static const char *transfertypes[4] = {
|
|
"control", "isochronous", "bulk", "interrupt"
|
|
};
|
|
usb_debug (" #Endpoint %d (%s), max packet size %x, type %s\n",
|
|
desc->bEndpointAddress & 0x7f,
|
|
(desc->bEndpointAddress & 0x80) ? "in" : "out",
|
|
desc->wMaxPacketSize,
|
|
transfertypes[desc->bmAttributes & 0x3]);
|
|
|
|
endpoint_t *ep = &dev->endpoints[dev->num_endp++];
|
|
ep->dev = dev;
|
|
ep->endpoint = desc->bEndpointAddress;
|
|
ep->toggle = 0;
|
|
ep->maxpacketsize = desc->wMaxPacketSize;
|
|
ep->direction = (desc->bEndpointAddress & 0x80) ? IN : OUT;
|
|
ep->type = desc->bmAttributes & 0x3;
|
|
ep->interval = usb_decode_interval (dev->speed, ep->type,
|
|
desc->bInterval);
|
|
}
|
|
|
|
if ((controller->finish_device_config &&
|
|
controller->finish_device_config(dev)) ||
|
|
set_configuration(dev) < 0) {
|
|
usb_debug ("Could not finalize device configuration\n");
|
|
usb_detach_device (controller, dev->address);
|
|
return -1;
|
|
}
|
|
|
|
int class = dev->descriptor->bDeviceClass;
|
|
if (class == 0)
|
|
class = intf->bInterfaceClass;
|
|
|
|
enum {
|
|
audio_device = 0x01,
|
|
comm_device = 0x02,
|
|
hid_device = 0x03,
|
|
physical_device = 0x05,
|
|
imaging_device = 0x06,
|
|
printer_device = 0x07,
|
|
msc_device = 0x08,
|
|
hub_device = 0x09,
|
|
cdc_device = 0x0a,
|
|
ccid_device = 0x0b,
|
|
security_device = 0x0d,
|
|
video_device = 0x0e,
|
|
healthcare_device = 0x0f,
|
|
diagnostic_device = 0xdc,
|
|
wireless_device = 0xe0,
|
|
misc_device = 0xef,
|
|
};
|
|
usb_debug("Class: ");
|
|
switch (class) {
|
|
case audio_device:
|
|
usb_debug("audio\n");
|
|
break;
|
|
case comm_device:
|
|
usb_debug("communication\n");
|
|
break;
|
|
case hid_device:
|
|
usb_debug ("HID\n");
|
|
#if IS_ENABLED(CONFIG_LP_USB_HID)
|
|
dev->init = usb_hid_init;
|
|
return dev->address;
|
|
#else
|
|
usb_debug ("NOTICE: USB HID support not compiled in\n");
|
|
#endif
|
|
break;
|
|
case physical_device:
|
|
usb_debug("physical\n");
|
|
break;
|
|
case imaging_device:
|
|
usb_debug("camera\n");
|
|
break;
|
|
case printer_device:
|
|
usb_debug("printer\n");
|
|
break;
|
|
case msc_device:
|
|
usb_debug ("MSC\n");
|
|
#if IS_ENABLED(CONFIG_LP_USB_MSC)
|
|
dev->init = usb_msc_init;
|
|
return dev->address;
|
|
#else
|
|
usb_debug ("NOTICE: USB MSC support not compiled in\n");
|
|
#endif
|
|
break;
|
|
case hub_device:
|
|
usb_debug ("hub\n");
|
|
#if IS_ENABLED(CONFIG_LP_USB_HUB)
|
|
dev->init = usb_hub_init;
|
|
return dev->address;
|
|
#else
|
|
usb_debug ("NOTICE: USB hub support not compiled in\n");
|
|
#endif
|
|
break;
|
|
case cdc_device:
|
|
usb_debug("CDC\n");
|
|
break;
|
|
case ccid_device:
|
|
usb_debug("smartcard / CCID\n");
|
|
break;
|
|
case security_device:
|
|
usb_debug("content security\n");
|
|
break;
|
|
case video_device:
|
|
usb_debug("video\n");
|
|
break;
|
|
case healthcare_device:
|
|
usb_debug("healthcare\n");
|
|
break;
|
|
case diagnostic_device:
|
|
usb_debug("diagnostic\n");
|
|
break;
|
|
case wireless_device:
|
|
usb_debug("wireless\n");
|
|
break;
|
|
default:
|
|
usb_debug("unsupported class %x\n", class);
|
|
break;
|
|
}
|
|
dev->init = usb_generic_init;
|
|
return dev->address;
|
|
}
|
|
|
|
/*
|
|
* Should be called by the hub drivers whenever a physical detach occurs
|
|
* and can be called by usb class drivers if they are unsatisfied with a
|
|
* malfunctioning device.
|
|
*/
|
|
void
|
|
usb_detach_device(hci_t *controller, int devno)
|
|
{
|
|
/* check if device exists, as we may have
|
|
been called yet by the usb class driver */
|
|
if (controller->devices[devno]) {
|
|
controller->devices[devno]->destroy (controller->devices[devno]);
|
|
if (controller->destroy_device)
|
|
controller->destroy_device(controller, devno);
|
|
/* Tear down the device itself *after* destroy_device()
|
|
* has had a chance to interoogate it. */
|
|
free(controller->devices[devno]);
|
|
controller->devices[devno] = NULL;
|
|
}
|
|
}
|
|
|
|
int
|
|
usb_attach_device(hci_t *controller, int hubaddress, int port, usb_speed speed)
|
|
{
|
|
static const char* speeds[] = { "full", "low", "high", "super" };
|
|
usb_debug ("%sspeed device\n", (speed < sizeof(speeds) / sizeof(char*))
|
|
? speeds[speed] : "invalid value - no");
|
|
int newdev = set_address (controller, speed, port, hubaddress);
|
|
if (newdev == -1)
|
|
return -1;
|
|
usbdev_t *newdev_t = controller->devices[newdev];
|
|
// determine responsible driver - current done in set_address
|
|
newdev_t->init (newdev_t);
|
|
/* init() may have called usb_detach_device() yet, so check */
|
|
return controller->devices[newdev] ? newdev : -1;
|
|
}
|
|
|
|
static void
|
|
usb_generic_destroy (usbdev_t *dev)
|
|
{
|
|
if (usb_generic_remove)
|
|
usb_generic_remove(dev);
|
|
}
|
|
|
|
void
|
|
usb_generic_init (usbdev_t *dev)
|
|
{
|
|
dev->data = NULL;
|
|
dev->destroy = usb_generic_destroy;
|
|
|
|
if (usb_generic_create)
|
|
usb_generic_create(dev);
|
|
|
|
if (dev->data == NULL) {
|
|
usb_debug("Detaching device not used by payload\n");
|
|
usb_detach_device(dev->controller, dev->address);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* returns the address of the closest USB2.0 hub, which is responsible for
|
|
* split transactions, along with the number of the used downstream port
|
|
*/
|
|
int closest_usb2_hub(const usbdev_t *dev, int *const addr, int *const port)
|
|
{
|
|
const usbdev_t *usb1dev;
|
|
|
|
do {
|
|
usb1dev = dev;
|
|
if ((dev->hub >= 0) && (dev->hub < 128))
|
|
dev = dev->controller->devices[dev->hub];
|
|
else
|
|
dev = NULL;
|
|
} while (dev && (dev->speed < 2));
|
|
|
|
if (dev) {
|
|
*addr = usb1dev->hub;
|
|
*port = usb1dev->port;
|
|
return 0;
|
|
}
|
|
|
|
usb_debug("Couldn't find closest USB2.0 hub.\n");
|
|
return 1;
|
|
}
|