coreboot-kgpe-d16/targets/iei/juki-511p/Config.lb
Nikolay Petukhov 538b849695 Add support for the IEI JUKI-511P and IEI ROCKY-512 half-size boards.
Both are very similar, thus both use the JUKI-511P target.

Linux with patches from Juergen Beisert
(http://www.linuxbios.org/pipermail/linuxbios/2007-May/020932.html)
boots and work fine (ide, usb, ethernet, serial, keyboard and sound
work normally).

Problems:
 - Filo loads a bzImage only from ide0 (ide1 doesn't work yet).
 - Video doesn't work, yet.

Signed-off-by: Nikolay Petukhov <nikolay.petukhov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2716 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-07 20:52:42 +00:00

37 lines
1.1 KiB
Text

##
## This file is part of the LinuxBIOS project.
##
## Copyright (C) 2007 Nikolay Petukhov <nikolay.petukhov@gmail.com>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
target juki-511p
mainboard iei/juki-511p
option ROM_SIZE=256*1024
option HAVE_PIRQ_TABLE=1
option CONFIG_COMPRESS=0
option CONFIG_PRECOMPRESSED_PAYLOAD=0
romimage "image"
option ROM_IMAGE_SIZE=64*1024
option LINUXBIOS_EXTRA_VERSION="-filo"
payload ../../filo.elf
end
buildrom ./linuxbios.rom ROM_SIZE "image"