d323d844f7
Currently autoport fills in USB current '0' if the detected setting isn't one of the known settings. This works as 0 is a valid setting from C point of view, but it's not supported on desktop PCs and on mobile platform results in the lowest possible USB PHY gain. Thus this might cause instabilities as the original firmware had stronger USB drive currents and gain settings. Add more known USB current fields to the map and generate a FIXME as comment when the detected current isn't one of the known entries instead of defaulting to 0. Change-Id: I48f4d636ce3401ba188f5519b5ff45fccf13f080 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78828 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
445 lines
13 KiB
Go
445 lines
13 KiB
Go
package main
|
|
|
|
import (
|
|
"fmt"
|
|
"os"
|
|
)
|
|
|
|
type bd82x6x struct {
|
|
variant string
|
|
node *DevTreeNode
|
|
}
|
|
|
|
func (b bd82x6x) writeGPIOSet(ctx Context, sb *os.File,
|
|
val uint32, set uint, partno int, constraint uint32) {
|
|
|
|
max := uint(32)
|
|
if set == 3 {
|
|
max = 12
|
|
}
|
|
|
|
bits := [6][2]string{
|
|
{"GPIO_MODE_NATIVE", "GPIO_MODE_GPIO"},
|
|
{"GPIO_DIR_OUTPUT", "GPIO_DIR_INPUT"},
|
|
{"GPIO_LEVEL_LOW", "GPIO_LEVEL_HIGH"},
|
|
{"GPIO_RESET_PWROK", "GPIO_RESET_RSMRST"},
|
|
{"GPIO_NO_INVERT", "GPIO_INVERT"},
|
|
{"GPIO_NO_BLINK", "GPIO_BLINK"},
|
|
}
|
|
|
|
for i := uint(0); i < max; i++ {
|
|
if (constraint>>i)&1 == 1 {
|
|
fmt.Fprintf(sb, " .gpio%d = %s,\n",
|
|
(set-1)*32+i,
|
|
bits[partno][(val>>i)&1])
|
|
}
|
|
}
|
|
}
|
|
|
|
func (b bd82x6x) GPIO(ctx Context, inteltool InteltoolData) {
|
|
var constraint uint32
|
|
gpio := Create(ctx, "gpio.c")
|
|
defer gpio.Close()
|
|
|
|
AddBootBlockFile("gpio.c", "")
|
|
AddROMStageFile("gpio.c", "")
|
|
|
|
Add_gpl(gpio)
|
|
gpio.WriteString("#include <southbridge/intel/common/gpio.h>\n\n")
|
|
|
|
addresses := [3][6]int{
|
|
{0x00, 0x04, 0x0c, 0x60, 0x2c, 0x18},
|
|
{0x30, 0x34, 0x38, 0x64, -1, -1},
|
|
{0x40, 0x44, 0x48, 0x68, -1, -1},
|
|
}
|
|
|
|
for set := 1; set <= 3; set++ {
|
|
for partno, part := range []string{"mode", "direction", "level", "reset", "invert", "blink"} {
|
|
addr := addresses[set-1][partno]
|
|
if addr < 0 {
|
|
continue
|
|
}
|
|
fmt.Fprintf(gpio, "static const struct pch_gpio_set%d pch_gpio_set%d_%s = {\n",
|
|
set, set, part)
|
|
|
|
constraint = 0xffffffff
|
|
switch part {
|
|
case "direction":
|
|
/* Ignored on native mode */
|
|
constraint = inteltool.GPIO[uint16(addresses[set-1][0])]
|
|
case "level":
|
|
/* Level doesn't matter for input */
|
|
constraint = inteltool.GPIO[uint16(addresses[set-1][0])]
|
|
constraint &^= inteltool.GPIO[uint16(addresses[set-1][1])]
|
|
case "reset":
|
|
/* Only show reset */
|
|
constraint = inteltool.GPIO[uint16(addresses[set-1][3])]
|
|
case "invert":
|
|
/* Only on input and only show inverted GPIO */
|
|
constraint = inteltool.GPIO[uint16(addresses[set-1][0])]
|
|
constraint &= inteltool.GPIO[uint16(addresses[set-1][1])]
|
|
constraint &= inteltool.GPIO[uint16(addresses[set-1][4])]
|
|
case "blink":
|
|
/* Only on output and only show blinking GPIO */
|
|
constraint = inteltool.GPIO[uint16(addresses[set-1][0])]
|
|
constraint &^= inteltool.GPIO[uint16(addresses[set-1][1])]
|
|
constraint &= inteltool.GPIO[uint16(addresses[set-1][5])]
|
|
}
|
|
b.writeGPIOSet(ctx, gpio, inteltool.GPIO[uint16(addr)], uint(set), partno, constraint)
|
|
gpio.WriteString("};\n\n")
|
|
}
|
|
}
|
|
|
|
gpio.WriteString(`const struct pch_gpio_map mainboard_gpio_map = {
|
|
.set1 = {
|
|
.mode = &pch_gpio_set1_mode,
|
|
.direction = &pch_gpio_set1_direction,
|
|
.level = &pch_gpio_set1_level,
|
|
.blink = &pch_gpio_set1_blink,
|
|
.invert = &pch_gpio_set1_invert,
|
|
.reset = &pch_gpio_set1_reset,
|
|
},
|
|
.set2 = {
|
|
.mode = &pch_gpio_set2_mode,
|
|
.direction = &pch_gpio_set2_direction,
|
|
.level = &pch_gpio_set2_level,
|
|
.reset = &pch_gpio_set2_reset,
|
|
},
|
|
.set3 = {
|
|
.mode = &pch_gpio_set3_mode,
|
|
.direction = &pch_gpio_set3_direction,
|
|
.level = &pch_gpio_set3_level,
|
|
.reset = &pch_gpio_set3_reset,
|
|
},
|
|
};
|
|
`)
|
|
}
|
|
|
|
func (b bd82x6x) IsPCIeHotplug(ctx Context, port int) bool {
|
|
portDev, ok := PCIMap[PCIAddr{Bus: 0, Dev: 0x1c, Func: port}]
|
|
if !ok {
|
|
return false
|
|
}
|
|
return (portDev.ConfigDump[0xdb] & (1 << 6)) != 0
|
|
}
|
|
|
|
func ich9GetFlashSize(ctx Context) {
|
|
inteltool := ctx.InfoSource.GetInteltool()
|
|
switch (inteltool.RCBA[0x3410] >> 10) & 3 {
|
|
/* SPI. All boards I've seen with sandy/ivy use SPI. */
|
|
case 3:
|
|
ROMProtocol = "SPI"
|
|
highflkb := uint32(0)
|
|
for reg := uint16(0); reg < 5; reg++ {
|
|
fl := (inteltool.RCBA[0x3854+4*reg] >> 16) & 0x1fff
|
|
flkb := (fl + 1) << 2
|
|
if flkb > highflkb {
|
|
highflkb = flkb
|
|
}
|
|
}
|
|
ROMSizeKB = int(highflkb)
|
|
/* Shared with ME. Flashrom is unable to handle it. */
|
|
FlashROMSupport = "n"
|
|
}
|
|
}
|
|
|
|
func (b bd82x6x) GetGPIOHeader() string {
|
|
return "southbridge/intel/bd82x6x/pch.h"
|
|
}
|
|
|
|
func (b bd82x6x) EnableGPE(in int) {
|
|
b.node.Registers[fmt.Sprintf("gpi%d_routing", in)] = "2"
|
|
}
|
|
|
|
func (b bd82x6x) EncodeGPE(in int) int {
|
|
return in + 0x10
|
|
}
|
|
|
|
func (b bd82x6x) DecodeGPE(in int) int {
|
|
return in - 0x10
|
|
}
|
|
|
|
func (b bd82x6x) NeedRouteGPIOManually() {
|
|
b.node.Comment += ", FIXME: set gpiX_routing for EC support"
|
|
}
|
|
|
|
func (b bd82x6x) Scan(ctx Context, addr PCIDevData) {
|
|
|
|
SouthBridge = &b
|
|
|
|
inteltool := ctx.InfoSource.GetInteltool()
|
|
b.GPIO(ctx, inteltool)
|
|
|
|
KconfigBool["SOUTHBRIDGE_INTEL_"+b.variant] = true
|
|
KconfigBool["SERIRQ_CONTINUOUS_MODE"] = true
|
|
KconfigInt["USBDEBUG_HCD_INDEX"] = 2
|
|
KconfigComment["USBDEBUG_HCD_INDEX"] = "FIXME: check this"
|
|
dmi := ctx.InfoSource.GetDMI()
|
|
if dmi.Vendor == "LENOVO" {
|
|
KconfigInt["DRAM_RESET_GATE_GPIO"] = 10
|
|
} else {
|
|
KconfigInt["DRAM_RESET_GATE_GPIO"] = 60
|
|
}
|
|
KconfigComment["DRAM_RESET_GATE_GPIO"] = "FIXME: check this"
|
|
|
|
ich9GetFlashSize(ctx)
|
|
|
|
DSDTDefines = append(DSDTDefines,
|
|
DSDTDefine{
|
|
Key: "BRIGHTNESS_UP",
|
|
Value: "\\_SB.PCI0.GFX0.INCB",
|
|
},
|
|
DSDTDefine{
|
|
Key: "BRIGHTNESS_DOWN",
|
|
Value: "\\_SB.PCI0.GFX0.DECB",
|
|
})
|
|
|
|
/* SPI init */
|
|
MainboardIncludes = append(MainboardIncludes, "southbridge/intel/bd82x6x/pch.h")
|
|
|
|
FADT := ctx.InfoSource.GetACPI()["FACP"]
|
|
|
|
pcieHotplugMap := "{ "
|
|
|
|
for port := 0; port < 7; port++ {
|
|
if b.IsPCIeHotplug(ctx, port) {
|
|
pcieHotplugMap += "1, "
|
|
} else {
|
|
pcieHotplugMap += "0, "
|
|
}
|
|
}
|
|
|
|
if b.IsPCIeHotplug(ctx, 7) {
|
|
pcieHotplugMap += "1 }"
|
|
} else {
|
|
pcieHotplugMap += "0 }"
|
|
}
|
|
|
|
cur := DevTreeNode{
|
|
Chip: "southbridge/intel/bd82x6x",
|
|
Comment: "Intel Series 6 Cougar Point PCH",
|
|
|
|
Registers: map[string]string{
|
|
"sata_interface_speed_support": "0x3",
|
|
"gen1_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x84:0x88]),
|
|
"gen2_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x88:0x8c]),
|
|
"gen3_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x8c:0x90]),
|
|
"gen4_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x90:0x94]),
|
|
"pcie_port_coalesce": "1",
|
|
"pcie_hotplug_map": pcieHotplugMap,
|
|
|
|
"sata_port_map": fmt.Sprintf("0x%x", PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 2}].ConfigDump[0x92]&0x3f),
|
|
|
|
"docking_supported": (FormatBool((FADT[113] & (1 << 1)) != 0)),
|
|
"spi_uvscc": fmt.Sprintf("0x%x", inteltool.RCBA[0x38c8]),
|
|
"spi_lvscc": fmt.Sprintf("0x%x", inteltool.RCBA[0x38c4]&^(1<<23)),
|
|
},
|
|
PCISlots: []PCISlot{
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x14, Func: 0}, writeEmpty: false, alias: "xhci", additionalComment: "USB 3.0 Controller"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 0}, writeEmpty: true, alias: "mei1", additionalComment: "Management Engine Interface 1"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 1}, writeEmpty: true, alias: "mei2", additionalComment: "Management Engine Interface 2"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 2}, writeEmpty: true, alias: "me_ide_r", additionalComment: "Management Engine IDE-R"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 3}, writeEmpty: true, alias: "me_kt", additionalComment: "Management Engine KT"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x19, Func: 0}, writeEmpty: true, alias: "gbe", additionalComment: "Intel Gigabit Ethernet"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x1a, Func: 0}, writeEmpty: true, alias: "ehci2", additionalComment: "USB2 EHCI #2"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x1b, Func: 0}, writeEmpty: true, alias: "hda", additionalComment: "High Definition Audio"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 0}, writeEmpty: true, alias: "pcie_rp1", additionalComment: "PCIe Port #1"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 1}, writeEmpty: true, alias: "pcie_rp2", additionalComment: "PCIe Port #2"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 2}, writeEmpty: true, alias: "pcie_rp3", additionalComment: "PCIe Port #3"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 3}, writeEmpty: true, alias: "pcie_rp4", additionalComment: "PCIe Port #4"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 4}, writeEmpty: true, alias: "pcie_rp5", additionalComment: "PCIe Port #5"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 5}, writeEmpty: true, alias: "pcie_rp6", additionalComment: "PCIe Port #6"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 6}, writeEmpty: true, alias: "pcie_rp7", additionalComment: "PCIe Port #7"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 7}, writeEmpty: true, alias: "pcie_rp8", additionalComment: "PCIe Port #8"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x1d, Func: 0}, writeEmpty: true, alias: "ehci1", additionalComment: "USB2 EHCI #1"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x1e, Func: 0}, writeEmpty: true, alias: "pci_bridge", additionalComment: "PCI bridge"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 0}, writeEmpty: true, alias: "lpc", additionalComment: "LPC bridge"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 2}, writeEmpty: true, alias: "sata1", additionalComment: "SATA Controller 1"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 3}, writeEmpty: true, alias: "smbus", additionalComment: "SMBus"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 5}, writeEmpty: true, alias: "sata2", additionalComment: "SATA Controller 2"},
|
|
PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 6}, writeEmpty: true, alias: "thermal", additionalComment: "Thermal"},
|
|
},
|
|
}
|
|
|
|
b.node = &cur
|
|
|
|
xhciDev, ok := PCIMap[PCIAddr{Bus: 0, Dev: 0x14, Func: 0}]
|
|
|
|
if ok {
|
|
cur.Registers["xhci_switchable_ports"] = FormatHexLE32(xhciDev.ConfigDump[0xd4:0xd8])
|
|
cur.Registers["superspeed_capable_ports"] = FormatHexLE32(xhciDev.ConfigDump[0xdc:0xe0])
|
|
cur.Registers["xhci_overcurrent_mapping"] = FormatHexLE32(xhciDev.ConfigDump[0xc0:0xc4])
|
|
}
|
|
|
|
PutPCIChip(addr, cur)
|
|
PutPCIDevParent(addr, "", "lpc")
|
|
|
|
DSDTIncludes = append(DSDTIncludes, DSDTInclude{
|
|
File: "southbridge/intel/common/acpi/platform.asl",
|
|
})
|
|
DSDTIncludes = append(DSDTIncludes, DSDTInclude{
|
|
File: "southbridge/intel/bd82x6x/acpi/globalnvs.asl",
|
|
})
|
|
DSDTIncludes = append(DSDTIncludes, DSDTInclude{
|
|
File: "southbridge/intel/common/acpi/sleepstates.asl",
|
|
})
|
|
DSDTPCI0Includes = append(DSDTPCI0Includes, DSDTInclude{
|
|
File: "southbridge/intel/bd82x6x/acpi/pch.asl",
|
|
})
|
|
|
|
AddBootBlockFile("early_init.c", "")
|
|
AddROMStageFile("early_init.c", "")
|
|
|
|
sb := Create(ctx, "early_init.c")
|
|
defer sb.Close()
|
|
Add_gpl(sb)
|
|
|
|
sb.WriteString(`
|
|
#include <bootblock_common.h>
|
|
#include <device/pci_ops.h>
|
|
#include <northbridge/intel/sandybridge/raminit_native.h>
|
|
#include <southbridge/intel/bd82x6x/pch.h>
|
|
|
|
`)
|
|
sb.WriteString("const struct southbridge_usb_port mainboard_usb_ports[] = {\n")
|
|
|
|
currentMap := map[uint32]int{
|
|
0x20000153: 0,
|
|
0x20000f57: 1,
|
|
0x2000055b: 2,
|
|
0x20000f51: 3,
|
|
0x2000094a: 4,
|
|
0x2000035f: 5,
|
|
0x20000f53: 6,
|
|
0x20000357: 7,
|
|
0x20000353: 8,
|
|
}
|
|
|
|
for port := uint(0); port < 14; port++ {
|
|
var pinmask uint32
|
|
OCPin := -1
|
|
if port < 8 {
|
|
pinmask = inteltool.RCBA[0x35a0]
|
|
} else {
|
|
pinmask = inteltool.RCBA[0x35a4]
|
|
}
|
|
for pin := uint(0); pin < 4; pin++ {
|
|
if ((pinmask >> ((port % 8) + 8*pin)) & 1) != 0 {
|
|
OCPin = int(pin)
|
|
if port >= 8 {
|
|
OCPin += 4
|
|
}
|
|
}
|
|
}
|
|
current, ok := currentMap[inteltool.RCBA[uint16(0x3500+4*port)]]
|
|
comment := ""
|
|
if !ok {
|
|
comment = fmt.Sprintf("// FIXME: Unknown current: RCBA(0x%x)=0x%x", 0x3500+4*port, uint16(0x3500+4*port))
|
|
}
|
|
fmt.Fprintf(sb, "\t{ %d, %d, %d }, %s\n",
|
|
((inteltool.RCBA[0x359c]>>port)&1)^1,
|
|
current,
|
|
OCPin,
|
|
comment)
|
|
}
|
|
sb.WriteString("};\n")
|
|
|
|
guessedMap := GuessSPDMap(ctx)
|
|
|
|
sb.WriteString(`
|
|
void bootblock_mainboard_early_init(void)
|
|
{
|
|
`)
|
|
RestorePCI16Simple(sb, addr, 0x82)
|
|
|
|
RestorePCI16Simple(sb, addr, 0x80)
|
|
|
|
sb.WriteString(`}
|
|
|
|
/* FIXME: Put proper SPD map here. */
|
|
void mainboard_get_spd(spd_raw_data *spd, bool id_only)
|
|
{
|
|
`)
|
|
for i, spd := range guessedMap {
|
|
fmt.Fprintf(sb, "\tread_spd(&spd[%d], 0x%02x, id_only);\n", i, spd)
|
|
}
|
|
sb.WriteString("}\n")
|
|
|
|
gnvs := Create(ctx, "acpi_tables.c")
|
|
defer gnvs.Close()
|
|
|
|
Add_gpl(gnvs)
|
|
gnvs.WriteString(`#include <acpi/acpi_gnvs.h>
|
|
#include <soc/nvs.h>
|
|
|
|
/* FIXME: check this function. */
|
|
void mainboard_fill_gnvs(struct global_nvs *gnvs)
|
|
{
|
|
/* The lid is open by default. */
|
|
gnvs->lids = 1;
|
|
|
|
/* Temperature at which OS will shutdown */
|
|
gnvs->tcrt = 100;
|
|
/* Temperature at which OS will throttle CPU */
|
|
gnvs->tpsv = 90;
|
|
}
|
|
`)
|
|
}
|
|
|
|
func init() {
|
|
/* BD82X6X LPC */
|
|
for id := 0x1c40; id <= 0x1c5f; id++ {
|
|
RegisterPCI(0x8086, uint16(id), bd82x6x{variant: "BD82X6X"})
|
|
}
|
|
|
|
/* C216 LPC */
|
|
for id := 0x1e41; id <= 0x1e5f; id++ {
|
|
RegisterPCI(0x8086, uint16(id), bd82x6x{variant: "C216"})
|
|
}
|
|
|
|
/* PCIe bridge */
|
|
for _, id := range []uint16{
|
|
0x1c10, 0x1c12, 0x1c14, 0x1c16,
|
|
0x1c18, 0x1c1a, 0x1c1c, 0x1c1e,
|
|
0x1e10, 0x1e12, 0x1e14, 0x1e16,
|
|
0x1e18, 0x1e1a, 0x1e1c, 0x1e1e,
|
|
0x1e25, 0x244e, 0x2448,
|
|
} {
|
|
RegisterPCI(0x8086, id, GenericPCI{})
|
|
}
|
|
|
|
/* SMBus controller */
|
|
RegisterPCI(0x8086, 0x1c22, GenericPCI{MissingParent: "smbus"})
|
|
RegisterPCI(0x8086, 0x1e22, GenericPCI{MissingParent: "smbus"})
|
|
|
|
/* SATA */
|
|
for _, id := range []uint16{
|
|
0x1c00, 0x1c01, 0x1c02, 0x1c03,
|
|
0x1e00, 0x1e01, 0x1e02, 0x1e03,
|
|
} {
|
|
RegisterPCI(0x8086, id, GenericPCI{})
|
|
}
|
|
|
|
/* EHCI */
|
|
for _, id := range []uint16{
|
|
0x1c26, 0x1c2d, 0x1e26, 0x1e2d,
|
|
} {
|
|
RegisterPCI(0x8086, id, GenericPCI{})
|
|
}
|
|
|
|
/* XHCI */
|
|
RegisterPCI(0x8086, 0x1e31, GenericPCI{})
|
|
|
|
/* ME and children */
|
|
for _, id := range []uint16{
|
|
0x1c3a, 0x1c3b, 0x1c3c, 0x1c3d,
|
|
0x1e3a, 0x1e3b, 0x1e3c, 0x1e3d,
|
|
} {
|
|
RegisterPCI(0x8086, id, GenericPCI{})
|
|
}
|
|
|
|
/* Ethernet */
|
|
RegisterPCI(0x8086, 0x1502, GenericPCI{})
|
|
RegisterPCI(0x8086, 0x1503, GenericPCI{})
|
|
|
|
}
|