dd2bc3f819
Old igd.asl had inconsistent addresses (between _DOD and actual device) and ghost devices. Any of those is enough to make brightness on windows fail and make igd.asl out-of-ACPI-spec. Also old code favoured ridiculous copying of the same thing 6 times per chipset. Leave only hooking up and chipset-specific part in chipset directory. Move NVS handling and ACPI-spec parts to a common file. Change-Id: I556769e5e28b83e7465e3db689e26c8c0ab44757 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7472 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
105 lines
3.5 KiB
Text
105 lines
3.5 KiB
Text
chip northbridge/intel/sandybridge
|
|
# IGD Displays
|
|
register "gfx.ndid" = "3"
|
|
register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
|
|
|
|
# Enable DisplayPort Hotplug with 6ms pulse
|
|
register "gpu_dp_d_hotplug" = "0x06"
|
|
|
|
# Enable Panel as LVDS and configure power delays
|
|
register "gpu_panel_port_select" = "0" # LVDS
|
|
register "gpu_panel_power_cycle_delay" = "5" # T4: 400ms
|
|
register "gpu_panel_power_up_delay" = "400" # T1+T2: 40ms
|
|
register "gpu_panel_power_down_delay" = "150" # T3: 15ms
|
|
register "gpu_panel_power_backlight_on_delay" = "2100" # T5: 210ms
|
|
register "gpu_panel_power_backlight_off_delay" = "2100" # TD: 210ms
|
|
|
|
device cpu_cluster 0 on
|
|
chip cpu/intel/socket_rPGA989
|
|
device lapic 0 on end
|
|
end
|
|
chip cpu/intel/model_206ax
|
|
# Magic APIC ID to locate this chip
|
|
device lapic 0xACAC off end
|
|
|
|
# Coordinate with HW_ALL
|
|
register "pstate_coord_type" = "0xfe"
|
|
|
|
register "tcc_offset" = "5" # TCC of 95C
|
|
|
|
register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1)
|
|
register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3)
|
|
register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7)
|
|
|
|
register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1)
|
|
register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3)
|
|
register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7)
|
|
end
|
|
end
|
|
|
|
device domain 0 on
|
|
subsystemid 0x1ae0 0xc000 inherit
|
|
device pci 00.0 on end # host bridge
|
|
device pci 02.0 on end # vga controller
|
|
|
|
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
|
|
# GPI routing
|
|
# 0 No effect (default)
|
|
# 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
|
|
# 2 SCI (if corresponding GPIO_EN bit is also set)
|
|
register "alt_gp_smi_en" = "0x0002"
|
|
register "gpi1_routing" = "1"
|
|
register "gpi6_routing" = "2"
|
|
|
|
register "sata_port_map" = "0x3"
|
|
# Set max SATA speed to 3.0 Gb/s
|
|
register "sata_interface_speed_support" = "0x2"
|
|
|
|
# Enable EC Port 0x68/0x6C
|
|
register "gen1_dec" = "0x00040069"
|
|
|
|
# EC range is 0x800-0x9ff
|
|
register "gen2_dec" = "0x00fc0901"
|
|
|
|
# EC range is 0x1610-0x161F
|
|
register "gen3_dec" = "0x0001C1611"
|
|
|
|
# Enable zero-based linear PCIe root port functions
|
|
register "pcie_port_coalesce" = "1"
|
|
|
|
register "c2_latency" = "1"
|
|
register "p_cnt_throttling_supported" = "0"
|
|
|
|
device pci 14.0 on end # USB 3.0 Controller
|
|
device pci 16.0 on end # Management Engine Interface 1
|
|
device pci 16.1 off end # Management Engine Interface 2
|
|
device pci 16.2 off end # Management Engine IDE-R
|
|
device pci 16.3 off end # Management Engine KT
|
|
device pci 19.0 off end # Intel Gigabit Ethernet
|
|
device pci 1a.0 on end # USB2 EHCI #2 (AUO4, BlueTooth)
|
|
device pci 1b.0 on end # High Definition Audio
|
|
device pci 1c.0 on end # PCIe Port #1
|
|
device pci 1c.1 on end # PCIe Port #2 (WLAN)
|
|
device pci 1c.2 on end # PCIe Port #3 (Card Reader)
|
|
register "pcie_aspm_f2" = "0x3"
|
|
device pci 1c.3 off end # PCIe Port #4
|
|
device pci 1c.4 off end # PCIe Port #5
|
|
device pci 1c.5 on end # PCIe Port #6 (LAN)
|
|
device pci 1c.6 off end # PCIe Port #7
|
|
device pci 1c.7 off end # PCIe Port #8
|
|
device pci 1d.0 on end # USB2 EHCI #1 (Camera, WLAN, WWAN)
|
|
device pci 1e.0 off end # PCI bridge
|
|
device pci 1f.0 on
|
|
chip ec/quanta/it8518
|
|
# 60h/64h KBC
|
|
device pnp ff.1 on # dummy address
|
|
end
|
|
end
|
|
end # LPC bridge
|
|
device pci 1f.2 on end # SATA Controller 1 (HDD/SSD)
|
|
device pci 1f.3 on end # SMBus Controller
|
|
device pci 1f.5 off end # SATA Controller 2 (MSATA)
|
|
device pci 1f.6 off end # Thermal
|
|
end
|
|
end
|
|
end
|