coreboot-kgpe-d16/payloads/libpayload/drivers/usb/usb.c
Julius Werner e00ba2168b libpayload: usb: Unify USB speed between XHCI stack and USB core
This patch removes the confusing concept of a special "xhci_speed" with
a different numeric value from the usual speed used throughout the USB
core (except for the places directly interacting with the xHC, which are
explicitly marked). It also moves the MPS0 decoding function into the
core and moves some definitions around in preparation of later changes
that will make the stack SuperSpeed-ready. It makes both set_address
implementations share a constant for the specification-defined
SetAddress() recovery delay and removes pointless additional delays from
the non-XHCI version.

Change-Id: I422379d05d4a502b12dae183504e5231add5466a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170664
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit f160d4439c0d7cea1d2e6b97207935d61dcbb2f2)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6776
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-09-04 01:28:42 +02:00

616 lines
16 KiB
C

/*
* This file is part of the libpayload project.
*
* Copyright (C) 2008-2010 coresystems GmbH
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
//#define USB_DEBUG
#include <libpayload-config.h>
#include <usb/usb.h>
hci_t *usb_hcs = 0;
hci_t *
new_controller (void)
{
hci_t *controller = malloc (sizeof (hci_t));
if (controller) {
/* atomic */
controller->next = usb_hcs;
usb_hcs = controller;
/* atomic end */
}
return controller;
}
void
detach_controller (hci_t *controller)
{
if (controller == NULL)
return;
if (usb_hcs == controller) {
usb_hcs = controller->next;
} else {
hci_t *it = usb_hcs;
while (it != NULL) {
if (it->next == controller) {
it->next = controller->next;
return;
}
it = it->next;
}
}
}
/**
* Shut down all controllers
*/
int
usb_exit (void)
{
while (usb_hcs != NULL) {
usb_hcs->shutdown(usb_hcs);
}
return 0;
}
/**
* Polls all hubs on all USB controllers, to find out about device changes
*/
void
usb_poll (void)
{
if (usb_hcs == 0)
return;
hci_t *controller = usb_hcs;
while (controller != NULL) {
int i;
for (i = 0; i < 128; i++) {
if (controller->devices[i] != 0) {
controller->devices[i]->poll (controller->devices[i]);
}
}
controller = controller->next;
}
}
void
init_device_entry (hci_t *controller, int i)
{
if (controller->devices[i] != 0)
usb_debug("warning: device %d reassigned?\n", i);
controller->devices[i] = malloc(sizeof(usbdev_t));
controller->devices[i]->controller = controller;
controller->devices[i]->address = -1;
controller->devices[i]->hub = -1;
controller->devices[i]->port = -1;
controller->devices[i]->init = usb_nop_init;
controller->devices[i]->init (controller->devices[i]);
}
void
set_feature (usbdev_t *dev, int endp, int feature, int rtype)
{
dev_req_t dr;
dr.bmRequestType = rtype;
dr.data_dir = host_to_device;
dr.bRequest = SET_FEATURE;
dr.wValue = feature;
dr.wIndex = endp;
dr.wLength = 0;
dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0);
}
void
get_status (usbdev_t *dev, int intf, int rtype, int len, void *data)
{
dev_req_t dr;
dr.bmRequestType = rtype;
dr.data_dir = device_to_host;
dr.bRequest = GET_STATUS;
dr.wValue = 0;
dr.wIndex = intf;
dr.wLength = len;
dev->controller->control (dev, IN, sizeof (dr), &dr, len, data);
}
u8 *
get_descriptor (usbdev_t *dev, unsigned char bmRequestType, int descType,
int descIdx, int langID)
{
u8 buf[8];
u8 *result;
dev_req_t dr;
int size;
dr.bmRequestType = bmRequestType;
dr.data_dir = device_to_host; // always like this for descriptors
dr.bRequest = GET_DESCRIPTOR;
dr.wValue = (descType << 8) | descIdx;
dr.wIndex = langID;
dr.wLength = 8;
if (dev->controller->control (dev, IN, sizeof (dr), &dr, 8, buf) < 0) {
usb_debug ("getting descriptor size (type %x) failed\n",
descType);
}
if (descType == 1) {
device_descriptor_t *dd = (device_descriptor_t *) buf;
usb_debug ("maxPacketSize0: %x\n", dd->bMaxPacketSize0);
if (dd->bMaxPacketSize0 != 0)
dev->endpoints[0].maxpacketsize = dd->bMaxPacketSize0;
}
/* special case for configuration descriptors: they carry all their
subsequent descriptors with them, and keep the entire size at a
different location */
size = buf[0];
if (buf[1] == 2) {
int realsize = ((unsigned short *) (buf + 2))[0];
size = realsize;
}
result = malloc (size);
memset (result, 0, size);
dr.wLength = size;
if (dev->controller->
control (dev, IN, sizeof (dr), &dr, size, result) < 0) {
usb_debug ("getting descriptor (type %x, size %x) failed\n",
descType, size);
}
return result;
}
void
set_configuration (usbdev_t *dev)
{
dev_req_t dr;
dr.bmRequestType = 0;
dr.bRequest = SET_CONFIGURATION;
dr.wValue = dev->configuration[5];
dr.wIndex = 0;
dr.wLength = 0;
dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0);
}
int
clear_feature (usbdev_t *dev, int endp, int feature, int rtype)
{
dev_req_t dr;
dr.bmRequestType = rtype;
dr.data_dir = host_to_device;
dr.bRequest = CLEAR_FEATURE;
dr.wValue = feature;
dr.wIndex = endp;
dr.wLength = 0;
return dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0) < 0;
}
int
clear_stall (endpoint_t *ep)
{
usbdev_t *dev = ep->dev;
int endp = ep->endpoint;
int rtype = gen_bmRequestType (host_to_device, standard_type,
endp ? endp_recp : dev_recp);
int ret = clear_feature (dev, endp, ENDPOINT_HALT, rtype);
ep->toggle = 0;
return ret;
}
/* returns free address or -1 */
static int
get_free_address (hci_t *controller)
{
int i;
for (i = 1; i < 128; i++) {
if (controller->devices[i] == 0)
return i;
}
usb_debug ("no free address found\n");
return -1; // no free address
}
int
usb_decode_mps0(usb_speed speed, u8 bMaxPacketSize0)
{
switch (speed) {
case LOW_SPEED:
if (bMaxPacketSize0 != 8) {
usb_debug("Invalid MPS0: 0x%02x\n", bMaxPacketSize0);
bMaxPacketSize0 = 8;
}
return bMaxPacketSize0;
case FULL_SPEED:
switch (bMaxPacketSize0) {
case 8: case 16: case 32: case 64:
return bMaxPacketSize0;
default:
usb_debug("Invalid MPS0: 0x%02x\n", bMaxPacketSize0);
return 8;
}
case HIGH_SPEED:
if (bMaxPacketSize0 != 64) {
usb_debug("Invalid MPS0: 0x%02x\n", bMaxPacketSize0);
bMaxPacketSize0 = 64;
}
return bMaxPacketSize0;
case SUPER_SPEED:
if (bMaxPacketSize0 != 9) {
usb_debug("Invalid MPS0: 0x%02x\n", bMaxPacketSize0);
bMaxPacketSize0 = 9;
}
return 2 << bMaxPacketSize0;
default: /* GCC is stupid and cannot deal with enums correctly */
return 8;
}
}
/* Normalize bInterval to log2 of microframes */
static int
usb_decode_interval(usb_speed speed, const endpoint_type type, const unsigned char bInterval)
{
#define LOG2(a) ((sizeof(unsigned) << 3) - __builtin_clz(a) - 1)
switch (speed) {
case LOW_SPEED:
switch (type) {
case ISOCHRONOUS: case INTERRUPT:
return LOG2(bInterval) + 3;
default:
return 0;
}
case FULL_SPEED:
switch (type) {
case ISOCHRONOUS:
return (bInterval - 1) + 3;
case INTERRUPT:
return LOG2(bInterval) + 3;
default:
return 0;
}
case HIGH_SPEED:
switch (type) {
case ISOCHRONOUS: case INTERRUPT:
return bInterval - 1;
default:
return LOG2(bInterval);
}
case SUPER_SPEED:
switch (type) {
case ISOCHRONOUS: case INTERRUPT:
return bInterval - 1;
default:
return 0;
}
default:
return 0;
}
#undef LOG2
}
int
generic_set_address (hci_t *controller, usb_speed speed,
int hubport, int hubaddr)
{
int adr = get_free_address (controller); // address to set
dev_req_t dr;
memset (&dr, 0, sizeof (dr));
dr.data_dir = host_to_device;
dr.req_type = standard_type;
dr.req_recp = dev_recp;
dr.bRequest = SET_ADDRESS;
dr.wValue = adr;
dr.wIndex = 0;
dr.wLength = 0;
init_device_entry(controller, adr);
usbdev_t *dev = controller->devices[adr];
// dummy values for registering the address
dev->address = 0;
dev->hub = hubaddr;
dev->port = hubport;
dev->speed = speed;
dev->endpoints[0].dev = dev;
dev->endpoints[0].endpoint = 0;
dev->endpoints[0].maxpacketsize = 8;
dev->endpoints[0].toggle = 0;
dev->endpoints[0].direction = SETUP;
if (dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0) < 0) {
usb_debug ("set_address failed\n");
return -1;
}
mdelay (SET_ADDRESS_MDELAY);
return adr;
}
static int
set_address (hci_t *controller, usb_speed speed, int hubport, int hubaddr)
{
int adr = controller->set_address(controller, speed, hubport, hubaddr);
if (adr < 0 || !controller->devices[adr]) {
usb_debug ("set_address failed\n");
return -1;
}
configuration_descriptor_t *cd;
device_descriptor_t *dd;
usbdev_t *dev = controller->devices[adr];
dev->address = adr;
dev->hub = hubaddr;
dev->port = hubport;
dev->speed = speed;
dev->descriptor = get_descriptor (dev, gen_bmRequestType
(device_to_host, standard_type, dev_recp), 1, 0, 0);
dd = (device_descriptor_t *) dev->descriptor;
usb_debug ("* found device (0x%04x:0x%04x, USB %x.%x)",
dd->idVendor, dd->idProduct,
dd->bcdUSB >> 8, dd->bcdUSB & 0xff);
dev->quirks = usb_quirk_check(dd->idVendor, dd->idProduct);
usb_debug ("\ndevice has %x configurations\n", dd->bNumConfigurations);
if (dd->bNumConfigurations == 0) {
/* device isn't usable */
usb_debug ("... no usable configuration!\n");
dev->address = 0;
return -1;
}
dev->configuration = get_descriptor (dev, gen_bmRequestType
(device_to_host, standard_type, dev_recp), 2, 0, 0);
cd = (configuration_descriptor_t *) dev->configuration;
interface_descriptor_t *interface =
(interface_descriptor_t *) (((char *) cd) + cd->bLength);
{
int i;
int num = cd->bNumInterfaces;
interface_descriptor_t *current = interface;
usb_debug ("device has %x interfaces\n", num);
if (num > 1) {
int interfaces = usb_interface_check(dd->idVendor, dd->idProduct);
if (interfaces) {
/* Well known device, don't warn */
num = interfaces;
} else {
usb_debug ("\nNOTICE: This driver defaults to using the first interface.\n"
"This might be the wrong choice and lead to limited functionality\n"
"of the device. Please report such a case to coreboot@coreboot.org\n"
"as you might be the first.\n");
/* we limit to the first interface, as there was no need to
* implement something else for the time being. If you need
* it, see the SetInterface and GetInterface functions in
* the USB specification, and adapt appropriately.
*/
num = (num > 1) ? 1 : num;
}
}
for (i = 0; i < num; i++) {
int j;
usb_debug (" #%x has %x endpoints, interface %x:%x, protocol %x\n",
current->bInterfaceNumber, current->bNumEndpoints, current->bInterfaceClass, current->bInterfaceSubClass, current->bInterfaceProtocol);
endpoint_descriptor_t *endp =
(endpoint_descriptor_t *) (((char *) current)
+ current->bLength);
/* Skip any non-endpoint descriptor */
if (endp->bDescriptorType != 0x05)
endp = (endpoint_descriptor_t *)(((char *)endp) + ((char *)endp)[0]);
memset (dev->endpoints, 0, sizeof (dev->endpoints));
dev->num_endp = 1; // 0 always exists
dev->endpoints[0].dev = dev;
dev->endpoints[0].maxpacketsize = dd->bMaxPacketSize0;
dev->endpoints[0].direction = SETUP;
dev->endpoints[0].type = CONTROL;
dev->endpoints[0].interval = usb_decode_interval(dev->speed, CONTROL, endp->bInterval);
for (j = 1; j <= current->bNumEndpoints; j++) {
#ifdef USB_DEBUG
static const char *transfertypes[4] = {
"control", "isochronous", "bulk", "interrupt"
};
usb_debug (" #%x: Endpoint %x (%s), max packet size %x, type %s\n", j, endp->bEndpointAddress & 0x7f, ((endp->bEndpointAddress & 0x80) != 0) ? "in" : "out", endp->wMaxPacketSize, transfertypes[endp->bmAttributes]);
#endif
endpoint_t *ep =
&dev->endpoints[dev->num_endp++];
ep->dev = dev;
ep->endpoint = endp->bEndpointAddress;
ep->toggle = 0;
ep->maxpacketsize = endp->wMaxPacketSize;
ep->direction =
((endp->bEndpointAddress & 0x80) ==
0) ? OUT : IN;
ep->type = endp->bmAttributes;
ep->interval = usb_decode_interval(dev->speed, ep->type, endp->bInterval);
endp = (endpoint_descriptor_t
*) (((char *) endp) + endp->bLength);
}
current = (interface_descriptor_t *) endp;
}
}
if (controller->finish_device_config &&
controller->finish_device_config(dev))
return adr; /* Device isn't configured correctly,
only control transfers may work. */
set_configuration(dev);
int class = dd->bDeviceClass;
if (class == 0)
class = interface->bInterfaceClass;
enum {
audio_device = 0x01,
comm_device = 0x02,
hid_device = 0x03,
physical_device = 0x05,
imaging_device = 0x06,
printer_device = 0x07,
msc_device = 0x08,
hub_device = 0x09,
cdc_device = 0x0a,
ccid_device = 0x0b,
security_device = 0x0d,
video_device = 0x0e,
healthcare_device = 0x0f,
diagnostic_device = 0xdc,
wireless_device = 0xe0,
misc_device = 0xef,
};
usb_debug(", class: ");
switch (class) {
case audio_device:
usb_debug("audio\n");
break;
case comm_device:
usb_debug("communication\n");
break;
case hid_device:
usb_debug ("HID\n");
#ifdef CONFIG_LP_USB_HID
controller->devices[adr]->init = usb_hid_init;
return adr;
#else
usb_debug ("NOTICE: USB HID support not compiled in\n");
#endif
break;
case physical_device:
usb_debug("physical\n");
break;
case imaging_device:
usb_debug("camera\n");
break;
case printer_device:
usb_debug("printer\n");
break;
case msc_device:
usb_debug ("MSC\n");
#ifdef CONFIG_LP_USB_MSC
controller->devices[adr]->init = usb_msc_init;
return adr;
#else
usb_debug ("NOTICE: USB MSC support not compiled in\n");
#endif
break;
case hub_device:
usb_debug ("hub\n");
#ifdef CONFIG_LP_USB_HUB
controller->devices[adr]->init = usb_hub_init;
return adr;
#else
usb_debug ("NOTICE: USB hub support not compiled in.\n");
#endif
break;
case cdc_device:
usb_debug("CDC\n");
break;
case ccid_device:
usb_debug("smartcard / CCID\n");
break;
case security_device:
usb_debug("content security\n");
break;
case video_device:
usb_debug("video\n");
break;
case healthcare_device:
usb_debug("healthcare\n");
break;
case diagnostic_device:
usb_debug("diagnostic\n");
break;
case wireless_device:
usb_debug("wireless\n");
break;
default:
usb_debug("unsupported class %x\n", class);
break;
}
controller->devices[adr]->init = usb_generic_init;
return adr;
}
/*
* Should be called by the hub drivers whenever a physical detach occurs
* and can be called by usb class drivers if they are unsatisfied with a
* malfunctioning device.
*/
void
usb_detach_device(hci_t *controller, int devno)
{
/* check if device exists, as we may have
been called yet by the usb class driver */
if (controller->devices[devno]) {
controller->devices[devno]->destroy (controller->devices[devno]);
free(controller->devices[devno]);
controller->devices[devno] = NULL;
if (controller->destroy_device)
controller->destroy_device(controller, devno);
}
}
int
usb_attach_device(hci_t *controller, int hubaddress, int port, usb_speed speed)
{
static const char* speeds[] = { "full", "low", "high", "super" };
usb_debug ("%sspeed device\n", (speed < sizeof(speeds) / sizeof(char*))
? speeds[speed] : "invalid value - no");
int newdev = set_address (controller, speed, port, hubaddress);
if (newdev == -1)
return -1;
usbdev_t *newdev_t = controller->devices[newdev];
// determine responsible driver - current done in set_address
newdev_t->init (newdev_t);
/* init() may have called usb_detach_device() yet, so check */
return controller->devices[newdev] ? newdev : -1;
}
static void
usb_generic_destroy (usbdev_t *dev)
{
if (usb_generic_remove)
usb_generic_remove(dev);
}
void
usb_generic_init (usbdev_t *dev)
{
dev->data = NULL;
dev->destroy = usb_generic_destroy;
if (usb_generic_create)
usb_generic_create(dev);
}