coreboot-kgpe-d16/Documentation/Intel/fsp1_1.html

77 lines
2.6 KiB
HTML

<!DOCTYPE html>
<html>
<head>
<title>FSP 1.1</title>
</head>
<body>
<h1>x86 FSP 1.1 Development</h1>
<p>
Firmware Support Package (FSP) development requires System-on-a-Chip (SoC)
and board support. The combined steps are listed
<a target="_blank" href="development.html">here</a>.
The development steps for FSP are listed below:
</p>
<ol>
<li><a href="#RequiredFiles">Required Files</a></li>
<li>Add the <a href="#FspBinary">FSP Binary File</a> to the coreboot File System</li>
<li>Enable <a href="#corebootFspDebugging">coreboot/FSP Debugging</a></li>
</ol>
<p>
FSP Documentation:
</p>
<ul>
<li>Intel&reg; Firmware Support Package External Architecture Specification <a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/fsp-architecture-spec-v1-1.pdf">V1.1</a></li>
</ul>
<hr>
<h1><a name="RequiredFiles">Required Files</a></h1>
<h2><a name="corebootRequiredFiles">coreboot Required Files</a></h2>
<ol>
<li>Create the following directories if they do not already exist:
<ul>
<li>src/vendorcode/intel/fsp/fsp1_1/&lt;Chip Family&gt;</li>
<li>3rdparty/blobs/mainboard/&lt;Board Vendor&gt;/&lt;Board Name&gt;</li>
</ul>
</li>
<li>
The following files may need to be copied from the FSP build or release into the
directories above if they are not present or are out of date:
<ul>
<li>FspUpdVpd.h: src/vendorcode/intel/fsp/fsp1_1/&lt;Chip Family&gt;/FspUpdVpd.h</li>
<li>FSP.bin: 3rdparty/blobs/mainboard/&lt;Board Vendor&gt;/&lt;Board Name&gt;/fsp.bin</li>
</ul>
</li>
</ol>
<hr>
<h1><a name="FspBinary">Add the FSP Binary File to coreboot File System</a></h1>
<p>
Add the FSP binary to the coreboot flash image using the following command:
</p>
<pre><code>util/cbfstool/cbfstool build/coreboot.rom add -t fsp -n fsp.bin -b &lt;base address&gt; -f fsp.bin</code></pre>
<p>
This command relocates the FSP binary to the 4K byte aligned location in CBFS so that the
FSP code for TempRamInit may be executed in place.
</p>
<hr>
<h1><a name="corebootFspDebugging">Enable coreboot/FSP Debugging</a></h1>
<p>
Set the following Kconfig values:
</p>
<ul>
<li>CONFIG_DISPLAY_FSP_ENTRY_POINTS - Display the FSP entry points in romstage</li>
<li>CONFIG_DISPLAY_HOBS - Display and verify the hand-off-blocks (HOBs) returned by MemoryInit</li>
<li>CONFIG_DISPLAY_VBT - Display Video BIOS Table (VBT) used for GOP</li>
<li>CONFIG_DISPLAY_UPD_DATA - Display the user specified product data passed to MemoryInit and SiliconInit</li>
</ul>
<hr>
<p>Modified: 31 January 2016</p>
</body>
</html>