Go to file
Usha P e150876910 soc/intel/cannonlake: Clean up report_cpu_info() function
This patch makes below clean-up for report_cpu_info() function.
1. Remove unused variables.
3. Reuse fill_processor_name.

TEST = Successfully able to boot hatch and verify the
cpu_name "CPU: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz"

Change-Id: I41c76eb93f0c5229c4a49ab041339b6ad51ad24a
Signed-off-by: Usha P <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-12-26 10:44:43 +00:00
3rdparty 3rdparty/fsp: Update to current master again 2019-12-16 09:41:57 +00:00
Documentation superio/common: Add more ACPI methods 2019-12-22 13:47:55 +00:00
LICENSES LICENSES: Add licenses used in the coreboot repo 2019-10-30 08:23:51 +00:00
configs arch/x86,soc/intel: Drop RESET_ON_INVALID_RAMSTAGE_CACHE 2019-12-19 19:31:08 +00:00
payloads libpayload/drivers/i8042: add error messages to i8042_probe 2019-12-20 17:43:17 +00:00
src soc/intel/cannonlake: Clean up report_cpu_info() function 2019-12-26 10:44:43 +00:00
util util/pgtblgen: Fix qemu on KVM 2019-12-26 10:39:26 +00:00
.checkpatch.conf .checkpatch.conf: Ignore a few more warnings 2018-08-13 12:23:24 +00:00
.clang-format lint/clang-format: set to 96 chars per line 2019-06-13 20:14:00 +00:00
.editorconfig Add .editorconfig file 2019-09-10 12:52:18 +00:00
.gitignore .gitignore: Add pmh7tool binary 2019-11-27 09:05:55 +00:00
.gitmodules submodules: Add 3rdparty/amd_blobs 2019-10-31 12:28:38 +00:00
.gitreview
AUTHORS Updated AUTHORS file for src/drivers 2019-10-22 12:55:27 +00:00
COPYING
MAINTAINERS src: Add Facebook Monolith to maintainers 2019-12-06 15:15:27 +00:00
Makefile util/kconfig: Move coreboot specific changes into Makefile.inc 2019-11-27 23:27:29 +00:00
Makefile.inc Makefiles: Remove -D__PRE_RAM__ 2019-11-22 06:27:21 +00:00
README.md README.md: Remove link to deprecated wiki 2019-11-16 20:39:55 +00:00
gnat.adc
toolchain.inc Makefiles: Remove -D__PRE_RAM__ 2019-11-22 06:27:21 +00:00

README.md

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.