Aaron Durbin e957832b2a vboot: remove remnants of VBOOT_STUB ... For vboot1 there was an rmodule that was loaded and ran to do the firmware verification. That's no longer used so remove the last vestiges of VBOOT_STUB. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built glados. Change-Id: I6b41544874bef4d84d0f548640114285cad3474e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11817 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>		2015-10-11 23:55:50 +00:00
..
include/soc	vboot: provide a unified flow for separate verstage	2015-09-30 06:58:02 +00:00
jdi_25x18_display
lp0	t210: lp0_resume: Configure unused SDMMC1/3 pads for low power leakage	2015-09-17 14:17:16 +00:00
addressmap.c	T210: Add 128MB VPR allocation/carveout	2015-08-28 06:40:43 +00:00
ape.c
arm_tf.c	t210: Pass in required BL31 parameters	2015-08-28 06:40:17 +00:00
bootblock.c	t210: implement MBIST workaround	2015-07-23 16:44:30 +02:00
bootblock_asm.S
cbmem.c
ccplex.c	t210: set CAR2PMC_CPU_ACK_WIDTH to 0	2015-07-09 00:09:16 +02:00
chip.h
clock.c	t210: audio: add CLK_V_EXTPERIPH1 clock	2015-07-23 16:44:53 +02:00
cpu.c
cpu_lib.S
dc.c
dma.c	t210: Correct dma_busy function	2015-07-16 22:36:57 +02:00
dp.c	edid: Use edid_mode struct to reduce redundancy	2015-08-28 06:42:03 +00:00
dsi.c
flow_ctrl.c
funitcfg.c
gic.c
i2c.c
i2c6.c	t210: i2c6: enable SOR_SAFE and DPAUX1 clocks for i2c6 to work	2015-07-09 00:09:08 +02:00
Kconfig	Do not show HAVE_MTC on non-tegra210	2015-10-11 09:40:04 +00:00
maincpu.S
Makefile.inc	vboot: remove remnants of VBOOT_STUB	2015-10-11 23:55:50 +00:00
mipi-phy.c
mipi.c
mipi_dsi.c
mmu_operations.c	t210: Move page tables to end of TZDRAM	2015-08-28 06:40:32 +00:00
monotonic_timer.c
mtc.c	cbfs: add struct cbfsf	2015-10-07 10:46:11 +00:00
padconfig.c
power.c
psci.c
ram_code.c
ramstage.c	t210: Enable WRAP to INCR burst type conversion in MSELECT	2015-07-23 16:44:40 +02:00
reset.c
romstage.c	T210: Add 128MB VPR allocation/carveout	2015-08-28 06:40:43 +00:00
romstage_asm.S
sdram.c	t210: new sdram_lp0_save_params() function	2015-07-16 22:39:33 +02:00
sdram_lp0.c	t210: sdram_lp0: also save EmcBctSpare2 field	2015-08-28 06:45:31 +00:00
secmon.c	t210: Add TZDRAM_BASE param to BL31_MAKEARGS	2015-07-13 09:19:34 +02:00
soc.c	bootmode: add display_init_required()	2015-09-04 15:09:00 +00:00
sor.c
spi.c	t210: SPI driver cleanup	2015-07-16 22:37:11 +02:00
stack.S
stage_entry.S	license headers: Drop FSF addresses again	2015-08-09 17:49:13 +02:00
uart.c