Go to file
Bill XIE ee8da1c3ae mainboard/hp: Add Elitebook Revolve 810 G1
The code is based on autoport and that for 8470p.

Tested:
- CPU i5-3437U
- Slotted DIMM 8GiB
- Soldered RAM 4GiB from Hynix (There may be more models here)
- Onboard USB2 interfaces (digitizer, wlan slot, wwan slot, camera)
- Mini pci-e on wlan slot
- On board SDHCI connected to pci-e
- USB3 ports
- USB3 hub on dock (connected to USB3 port 1)
- NVRAM options for North and South bridges
- S3
- TPM1 on LPC
- Linux 4.13.13-1 within Debian GNU/Linux testing, loaded from
  SeaBIOS, or Linux payload (Heads)

Not work:
- An "NFC" device connected to LPC

Not implemented yet:
- Detecting the model of Soldered RAM at runtime, and loading
  the corresponding SPD datum (3 observed) from CBFS

Change-Id: Iba9c361591697e6a2b3b7b485f7f1649c2a83524
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/22972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-01-12 18:22:54 +00:00
3rdparty 3rdparty/blobs/soc/amd/stoneyridge: Use new location of stoneyridge blob 2018-01-07 18:36:30 +00:00
Documentation Documentation/Intel: Add NativeRaminit documentation 2017-12-09 16:59:16 +00:00
configs configs: Add intel/harcuvar FSP 2.0 sample configuration 2017-10-04 02:56:33 +00:00
payloads payloads/SeaBIOS: Add different MMIO uart configurations 2017-12-20 16:39:50 +00:00
src mainboard/hp: Add Elitebook Revolve 810 G1 2018-01-12 18:22:54 +00:00
util util/gitconfig: Refuse to commit on lint failure 2018-01-11 22:09:33 +00:00
.checkpatch.conf .checkpatch.conf: Ignore CORRUPTED_PATCH lint 2017-10-29 10:11:58 +00:00
.clang-format
.gitignore .gitignore: Do not track `util/cbfstool/cbfs-compression-tool` 2017-11-03 15:20:40 +00:00
.gitmodules
.gitreview
COPYING
MAINTAINERS MAINTAINERS: add maintainers for all PC Engines mainboards 2017-10-31 15:45:53 +00:00
Makefile build system: Deal with wildcard in subdirs-y 2017-10-29 08:48:54 +00:00
Makefile.inc util/gitconfig: Make gitconfig a bash script 2017-12-15 23:02:11 +00:00
README
gnat.adc
toolchain.inc toolchain: Always use GCC for Ada sources 2017-09-23 10:57:40 +00:00

README

-------------------------------------------------------------------------------
coreboot README
-------------------------------------------------------------------------------

coreboot is a Free Software project aimed at replacing the proprietary BIOS
(firmware) found in most computers.  coreboot performs a little bit of
hardware initialization and then executes additional boot logic, called a
payload.

With the separation of hardware initialization and later boot logic,
coreboot can scale from specialized applications that run directly
firmware, run operating systems in flash, load custom
bootloaders, or implement firmware standards, like PC BIOS services or
UEFI. This allows for systems to only include the features necessary
in the target application, reducing the amount of code and flash space
required.

coreboot was formerly known as LinuxBIOS.


Payloads
--------

After the basic initialization of the hardware has been performed, any
desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.


Supported Hardware
------------------

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

 * https://www.coreboot.org/Supported_Motherboards
 * https://www.coreboot.org/Supported_Chipsets_and_Devices


Build Requirements
------------------

 * make
 * gcc / g++
   Because Linux distribution compilers tend to use lots of patches. coreboot
   does lots of "unusual" things in its build system, some of which break due
   to those patches, sometimes by gcc aborting, sometimes - and that's worse -
   by generating broken object code.
   Two options: use our toolchain (eg. make crosstools-i386) or enable the
   ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this
   case).
 * iasl (for targets with ACPI support)
 * pkg-config
 * libssl-dev (openssl)

Optional:

 * doxygen (for generating/viewing documentation)
 * gdb (for better debugging facilities on some targets)
 * ncurses (for 'make menuconfig' and 'make nconfig')
 * flex and bison (for regenerating parsers)


Building coreboot
-----------------

Please consult https://www.coreboot.org/Build_HOWTO for details.


Testing coreboot Without Modifying Your Hardware
------------------------------------------------

If you want to test coreboot without any risks before you really decide
to use it on your hardware, you can use the QEMU system emulator to run
coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.


Website and Mailing List
------------------------

Further details on the project, a FAQ, many HOWTOs, news, development
guidelines and more can be found on the coreboot website:

  https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

  https://www.coreboot.org/Mailinglist


Copyright and License
---------------------

The copyright on coreboot is owned by quite a large number of individual
developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL).
Some files are licensed under the "GPL (version 2, or any later version)",
and some files are licensed under the "GPL, version 2". For some parts, which
were derived from other projects, other (GPL-compatible) licenses may apply.
Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.