666 lines
16 KiB
C
666 lines
16 KiB
C
/*
|
|
* This file is part of the flashrom project.
|
|
*
|
|
* Copyright (C) 2008 Stefan Wildemann <stefan.wildemann@kontron.com>
|
|
* Copyright (C) 2008 Claus Gindhart <claus.gindhart@kontron.com>
|
|
* Copyright (C) 2008 Dominik Geyer <dominik.geyer@kontron.com>
|
|
* Copyright (C) 2008 coresystems GmbH <info@coresystems.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* This module is designed for supporting the devices
|
|
* ST M25P40
|
|
* ST M25P80
|
|
* ST M25P16
|
|
* ST M25P32 already tested
|
|
* ST M25P64
|
|
* AT 25DF321 already tested
|
|
*
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
#include <stdint.h>
|
|
#include <sys/mman.h>
|
|
#include <pci/pci.h>
|
|
#include "flash.h"
|
|
#include "spi.h"
|
|
|
|
/* ICH9 controller register definition */
|
|
#define ICH9_REG_FADDR 0x08 /* 32 Bits */
|
|
#define ICH9_REG_FDATA0 0x10 /* 64 Bytes */
|
|
|
|
#define ICH9_REG_SSFS 0x90 /* 08 Bits */
|
|
#define SSFS_SCIP 0x00000001
|
|
#define SSFS_CDS 0x00000004
|
|
#define SSFS_FCERR 0x00000008
|
|
#define SSFS_AEL 0x00000010
|
|
|
|
#define ICH9_REG_SSFC 0x91 /* 24 Bits */
|
|
#define SSFC_SCGO 0x00000200
|
|
#define SSFC_ACS 0x00000400
|
|
#define SSFC_SPOP 0x00000800
|
|
#define SSFC_COP 0x00001000
|
|
#define SSFC_DBC 0x00010000
|
|
#define SSFC_DS 0x00400000
|
|
#define SSFC_SME 0x00800000
|
|
#define SSFC_SCF 0x01000000
|
|
#define SSFC_SCF_20MHZ 0x00000000
|
|
#define SSFC_SCF_33MHZ 0x01000000
|
|
|
|
#define ICH9_REG_PREOP 0x94 /* 16 Bits */
|
|
#define ICH9_REG_OPTYPE 0x96 /* 16 Bits */
|
|
#define ICH9_REG_OPMENU 0x98 /* 64 Bits */
|
|
|
|
// ICH9R SPI commands
|
|
#define SPI_OPCODE_TYPE_READ_NO_ADDRESS 0
|
|
#define SPI_OPCODE_TYPE_WRITE_NO_ADDRESS 1
|
|
#define SPI_OPCODE_TYPE_READ_WITH_ADDRESS 2
|
|
#define SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS 3
|
|
|
|
// ICH7 registers
|
|
#define ICH7_REG_SPIS 0x00 /* 16 Bits */
|
|
#define SPIS_SCIP 0x00000001
|
|
#define SPIS_CDS 0x00000004
|
|
#define SPIS_FCERR 0x00000008
|
|
|
|
/* VIA SPI is compatible with ICH7, but maxdata
|
|
to transfer is 16 bytes.
|
|
|
|
DATA byte count on ICH7 is 8:13, on VIA 8:11
|
|
|
|
bit 12 is port select CS0 CS1
|
|
bit 13 is FAST READ enable
|
|
bit 7 is used with fast read and one shot controls CS de-assert?
|
|
*/
|
|
|
|
#define ICH7_REG_SPIC 0x02 /* 16 Bits */
|
|
#define SPIC_SCGO 0x0002
|
|
#define SPIC_ACS 0x0004
|
|
#define SPIC_SPOP 0x0008
|
|
#define SPIC_DS 0x4000
|
|
|
|
#define ICH7_REG_SPIA 0x04 /* 32 Bits */
|
|
#define ICH7_REG_SPID0 0x08 /* 64 Bytes */
|
|
#define ICH7_REG_PREOP 0x54 /* 16 Bits */
|
|
#define ICH7_REG_OPTYPE 0x56 /* 16 Bits */
|
|
#define ICH7_REG_OPMENU 0x58 /* 64 Bits */
|
|
|
|
typedef struct _OPCODE {
|
|
uint8_t opcode; //This commands spi opcode
|
|
uint8_t spi_type; //This commands spi type
|
|
uint8_t atomic; //Use preop: (0: none, 1: preop0, 2: preop1
|
|
} OPCODE;
|
|
|
|
/* Opcode definition:
|
|
* Preop 1: Write Enable
|
|
* Preop 2: Write Status register enable
|
|
*
|
|
* OP 0: Write address
|
|
* OP 1: Read Address
|
|
* OP 2: ERASE block
|
|
* OP 3: Read Status register
|
|
* OP 4: Read ID
|
|
* OP 5: Write Status register
|
|
* OP 6: chip private (read JDEC id)
|
|
* OP 7: Chip erase
|
|
*/
|
|
typedef struct _OPCODES {
|
|
uint8_t preop[2];
|
|
OPCODE opcode[8];
|
|
} OPCODES;
|
|
|
|
static OPCODES *curopcodes = NULL;
|
|
|
|
/* HW access functions */
|
|
static inline uint32_t REGREAD32(int X)
|
|
{
|
|
volatile uint32_t regval;
|
|
regval = *(volatile uint32_t *)((uint8_t *) spibar + X);
|
|
return regval;
|
|
}
|
|
|
|
static inline uint16_t REGREAD16(int X)
|
|
{
|
|
volatile uint16_t regval;
|
|
regval = *(volatile uint16_t *)((uint8_t *) spibar + X);
|
|
return regval;
|
|
}
|
|
|
|
#define REGWRITE32(X,Y) (*(uint32_t *)((uint8_t *)spibar+X)=Y)
|
|
#define REGWRITE16(X,Y) (*(uint16_t *)((uint8_t *)spibar+X)=Y)
|
|
#define REGWRITE8(X,Y) (*(uint8_t *)((uint8_t *)spibar+X)=Y)
|
|
|
|
/* Common SPI functions */
|
|
static int program_opcodes(OPCODES * op);
|
|
static int run_opcode(OPCODE op, uint32_t offset,
|
|
uint8_t datalength, uint8_t * data);
|
|
static int ich_spi_read_page(struct flashchip *flash, uint8_t * buf,
|
|
int offset, int maxdata);
|
|
static int ich_spi_write_page(struct flashchip *flash, uint8_t * bytes,
|
|
int offset, int maxdata);
|
|
|
|
OPCODES O_ST_M25P = {
|
|
{
|
|
JEDEC_WREN,
|
|
0},
|
|
{
|
|
{JEDEC_BYTE_PROGRAM, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 1}, // Write Byte
|
|
{JEDEC_READ, SPI_OPCODE_TYPE_READ_WITH_ADDRESS, 0}, // Read Data
|
|
{JEDEC_BE_D8, SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS, 1}, // Erase Sector
|
|
{JEDEC_RDSR, SPI_OPCODE_TYPE_READ_NO_ADDRESS, 0}, // Read Device Status Reg
|
|
{JEDEC_RES, SPI_OPCODE_TYPE_READ_WITH_ADDRESS, 0}, // Resume Deep Power-Down
|
|
{JEDEC_WRSR, SPI_OPCODE_TYPE_WRITE_NO_ADDRESS, 1}, // Write Status Register
|
|
{JEDEC_RDID, SPI_OPCODE_TYPE_READ_NO_ADDRESS, 0}, // Read JDEC ID
|
|
{JEDEC_CE_C7, SPI_OPCODE_TYPE_WRITE_NO_ADDRESS, 1}, // Bulk erase
|
|
}
|
|
};
|
|
|
|
int program_opcodes(OPCODES * op)
|
|
{
|
|
uint8_t a;
|
|
uint16_t preop, optype;
|
|
uint32_t opmenu[2];
|
|
|
|
/* Program Prefix Opcodes */
|
|
preop = 0;
|
|
/* 0:7 Prefix Opcode 1 */
|
|
preop = (op->preop[0]);
|
|
/* 8:16 Prefix Opcode 2 */
|
|
preop |= ((uint16_t) op->preop[1]) << 8;
|
|
|
|
/* Program Opcode Types 0 - 7 */
|
|
optype = 0;
|
|
for (a = 0; a < 8; a++) {
|
|
optype |= ((uint16_t) op->opcode[a].spi_type) << (a * 2);
|
|
}
|
|
|
|
/* Program Allowable Opcodes 0 - 3 */
|
|
opmenu[0] = 0;
|
|
for (a = 0; a < 4; a++) {
|
|
opmenu[0] |= ((uint32_t) op->opcode[a].opcode) << (a * 8);
|
|
}
|
|
|
|
/*Program Allowable Opcodes 4 - 7 */
|
|
opmenu[1] = 0;
|
|
for (a = 4; a < 8; a++) {
|
|
opmenu[1] |= ((uint32_t) op->opcode[a].opcode) << ((a - 4) * 8);
|
|
}
|
|
|
|
switch (flashbus) {
|
|
case BUS_TYPE_ICH7_SPI:
|
|
case BUS_TYPE_VIA_SPI:
|
|
REGWRITE16(ICH7_REG_PREOP, preop);
|
|
REGWRITE16(ICH7_REG_OPTYPE, optype);
|
|
REGWRITE32(ICH7_REG_OPMENU, opmenu[0]);
|
|
REGWRITE32(ICH7_REG_OPMENU + 4, opmenu[1]);
|
|
break;
|
|
case BUS_TYPE_ICH9_SPI:
|
|
REGWRITE16(ICH9_REG_PREOP, preop);
|
|
REGWRITE16(ICH9_REG_OPTYPE, optype);
|
|
REGWRITE32(ICH9_REG_OPMENU, opmenu[0]);
|
|
REGWRITE32(ICH9_REG_OPMENU + 4, opmenu[1]);
|
|
break;
|
|
default:
|
|
printf_debug("%s: unsupported chipset\n", __FUNCTION__);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ich7_run_opcode(OPCODE op, uint32_t offset,
|
|
uint8_t datalength, uint8_t * data, int maxdata)
|
|
{
|
|
int write_cmd = 0;
|
|
int timeout;
|
|
uint32_t temp32 = 0;
|
|
uint16_t temp16;
|
|
uint32_t a;
|
|
uint64_t opmenu;
|
|
int opcode_index;
|
|
|
|
/* Is it a write command? */
|
|
if ((op.spi_type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS)
|
|
|| (op.spi_type == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS)) {
|
|
write_cmd = 1;
|
|
}
|
|
|
|
/* Programm Offset in Flash into FADDR */
|
|
REGWRITE32(ICH7_REG_SPIA, (offset & 0x00FFFFFF)); /* SPI addresses are 24 BIT only */
|
|
|
|
/* Program data into FDATA0 to N */
|
|
if (write_cmd && (datalength != 0)) {
|
|
temp32 = 0;
|
|
for (a = 0; a < datalength; a++) {
|
|
if ((a % 4) == 0) {
|
|
temp32 = 0;
|
|
}
|
|
|
|
temp32 |= ((uint32_t) data[a]) << ((a % 4) * 8);
|
|
|
|
if ((a % 4) == 3) {
|
|
REGWRITE32(ICH7_REG_SPID0 + (a - (a % 4)),
|
|
temp32);
|
|
}
|
|
}
|
|
if (((a - 1) % 4) != 3) {
|
|
REGWRITE32(ICH7_REG_SPID0 +
|
|
((a - 1) - ((a - 1) % 4)), temp32);
|
|
}
|
|
|
|
}
|
|
|
|
/* Assemble SPIS */
|
|
temp16 = 0;
|
|
/* clear error status registers */
|
|
temp16 |= (SPIS_CDS + SPIS_FCERR);
|
|
REGWRITE16(ICH7_REG_SPIS, temp16);
|
|
|
|
/* Assemble SPIC */
|
|
temp16 = 0;
|
|
|
|
if (datalength != 0) {
|
|
temp16 |= SPIC_DS;
|
|
temp16 |= ((uint32_t) ((datalength - 1) & (maxdata - 1))) << 8;
|
|
}
|
|
|
|
/* Select opcode */
|
|
opmenu = REGREAD32(ICH7_REG_OPMENU);
|
|
opmenu |= ((uint64_t)REGREAD32(ICH7_REG_OPMENU + 4)) << 32;
|
|
|
|
for (opcode_index=0; opcode_index<8; opcode_index++) {
|
|
if((opmenu & 0xff) == op.opcode) {
|
|
break;
|
|
}
|
|
opmenu >>= 8;
|
|
}
|
|
if (opcode_index == 8) {
|
|
printf_debug("Opcode %x not found.\n", op.opcode);
|
|
return 1;
|
|
}
|
|
temp16 |= ((uint16_t) (opcode_index & 0x07)) << 4;
|
|
|
|
/* Handle Atomic */
|
|
if (op.atomic != 0) {
|
|
/* Select atomic command */
|
|
temp16 |= SPIC_ACS;
|
|
/* Select prefix opcode */
|
|
if ((op.atomic - 1) == 1) {
|
|
/*Select prefix opcode 2 */
|
|
temp16 |= SPIC_SPOP;
|
|
}
|
|
}
|
|
|
|
/* Start */
|
|
temp16 |= SPIC_SCGO;
|
|
|
|
/* write it */
|
|
REGWRITE16(ICH7_REG_SPIC, temp16);
|
|
|
|
/* wait for cycle complete */
|
|
timeout = 1000 * 60; // 60s is a looong timeout.
|
|
while (((REGREAD16(ICH7_REG_SPIS) & SPIS_CDS) == 0) && --timeout) {
|
|
myusec_delay(1000);
|
|
}
|
|
if (!timeout) {
|
|
printf_debug("timeout\n");
|
|
}
|
|
|
|
if ((REGREAD16(ICH7_REG_SPIS) & SPIS_FCERR) != 0) {
|
|
printf_debug("Transaction error!\n");
|
|
return 1;
|
|
}
|
|
|
|
if ((!write_cmd) && (datalength != 0)) {
|
|
for (a = 0; a < datalength; a++) {
|
|
if ((a % 4) == 0) {
|
|
temp32 = REGREAD32(ICH7_REG_SPID0 + (a));
|
|
}
|
|
|
|
data[a] =
|
|
(temp32 & (((uint32_t) 0xff) << ((a % 4) * 8)))
|
|
>> ((a % 4) * 8);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ich9_run_opcode(OPCODE op, uint32_t offset,
|
|
uint8_t datalength, uint8_t * data)
|
|
{
|
|
int write_cmd = 0;
|
|
int timeout;
|
|
uint32_t temp32;
|
|
uint32_t a;
|
|
uint64_t opmenu;
|
|
int opcode_index;
|
|
|
|
/* Is it a write command? */
|
|
if ((op.spi_type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS)
|
|
|| (op.spi_type == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS)) {
|
|
write_cmd = 1;
|
|
}
|
|
|
|
/* Programm Offset in Flash into FADDR */
|
|
REGWRITE32(ICH9_REG_FADDR, (offset & 0x00FFFFFF)); /* SPI addresses are 24 BIT only */
|
|
|
|
/* Program data into FDATA0 to N */
|
|
if (write_cmd && (datalength != 0)) {
|
|
temp32 = 0;
|
|
for (a = 0; a < datalength; a++) {
|
|
if ((a % 4) == 0) {
|
|
temp32 = 0;
|
|
}
|
|
|
|
temp32 |= ((uint32_t) data[a]) << ((a % 4) * 8);
|
|
|
|
if ((a % 4) == 3) {
|
|
REGWRITE32(ICH9_REG_FDATA0 + (a - (a % 4)),
|
|
temp32);
|
|
}
|
|
}
|
|
if (((a - 1) % 4) != 3) {
|
|
REGWRITE32(ICH9_REG_FDATA0 +
|
|
((a - 1) - ((a - 1) % 4)), temp32);
|
|
}
|
|
|
|
}
|
|
|
|
/* Assemble SSFS + SSFC */
|
|
temp32 = 0;
|
|
|
|
/* clear error status registers */
|
|
temp32 |= (SSFS_CDS + SSFS_FCERR);
|
|
/* USE 20 MhZ */
|
|
temp32 |= SSFC_SCF_20MHZ;
|
|
|
|
if (datalength != 0) {
|
|
uint32_t datatemp;
|
|
temp32 |= SSFC_DS;
|
|
datatemp = ((uint32_t) ((datalength - 1) & 0x3f)) << (8 + 8);
|
|
temp32 |= datatemp;
|
|
}
|
|
|
|
/* Select opcode */
|
|
opmenu = REGREAD32(ICH9_REG_OPMENU);
|
|
opmenu |= ((uint64_t)REGREAD32(ICH9_REG_OPMENU + 4)) << 32;
|
|
|
|
for (opcode_index=0; opcode_index<8; opcode_index++) {
|
|
if((opmenu & 0xff) == op.opcode) {
|
|
break;
|
|
}
|
|
opmenu >>= 8;
|
|
}
|
|
if (opcode_index == 8) {
|
|
printf_debug("Opcode %x not found.\n", op.opcode);
|
|
return 1;
|
|
}
|
|
temp32 |= ((uint32_t) (opcode_index & 0x07)) << (8 + 4);
|
|
|
|
/* Handle Atomic */
|
|
if (op.atomic != 0) {
|
|
/* Select atomic command */
|
|
temp32 |= SSFC_ACS;
|
|
/* Selct prefix opcode */
|
|
if ((op.atomic - 1) == 1) {
|
|
/*Select prefix opcode 2 */
|
|
temp32 |= SSFC_SPOP;
|
|
}
|
|
}
|
|
|
|
/* Start */
|
|
temp32 |= SSFC_SCGO;
|
|
|
|
/* write it */
|
|
REGWRITE32(ICH9_REG_SSFS, temp32);
|
|
|
|
/*wait for cycle complete */
|
|
timeout = 1000 * 60; // 60s is a looong timeout.
|
|
while (((REGREAD32(ICH9_REG_SSFS) & SSFS_CDS) == 0) && --timeout) {
|
|
myusec_delay(1000);
|
|
}
|
|
if (!timeout) {
|
|
printf_debug("timeout\n");
|
|
}
|
|
|
|
if ((REGREAD32(ICH9_REG_SSFS) & SSFS_FCERR) != 0) {
|
|
printf_debug("Transaction error!\n");
|
|
return 1;
|
|
}
|
|
|
|
if ((!write_cmd) && (datalength != 0)) {
|
|
for (a = 0; a < datalength; a++) {
|
|
if ((a % 4) == 0) {
|
|
temp32 = REGREAD32(ICH9_REG_FDATA0 + (a));
|
|
}
|
|
|
|
data[a] =
|
|
(temp32 & (((uint32_t) 0xff) << ((a % 4) * 8)))
|
|
>> ((a % 4) * 8);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int run_opcode(OPCODE op, uint32_t offset,
|
|
uint8_t datalength, uint8_t * data)
|
|
{
|
|
switch (flashbus) {
|
|
case BUS_TYPE_VIA_SPI:
|
|
return ich7_run_opcode(op, offset, datalength, data, 16);
|
|
case BUS_TYPE_ICH7_SPI:
|
|
return ich7_run_opcode(op, offset, datalength, data, 64);
|
|
case BUS_TYPE_ICH9_SPI:
|
|
return ich9_run_opcode(op, offset, datalength, data);
|
|
default:
|
|
printf_debug("%s: unsupported chipset\n", __FUNCTION__);
|
|
}
|
|
|
|
/* If we ever get here, something really weird happened */
|
|
return -1;
|
|
}
|
|
|
|
static int ich_spi_read_page(struct flashchip *flash, uint8_t * buf, int offset,
|
|
int maxdata)
|
|
{
|
|
int page_size = flash->page_size;
|
|
uint32_t remaining = flash->page_size;
|
|
int a;
|
|
|
|
printf_debug("ich_spi_read_page: offset=%d, number=%d, buf=%p\n",
|
|
offset, page_size, buf);
|
|
|
|
for (a = 0; a < page_size; a += maxdata) {
|
|
if (remaining < maxdata) {
|
|
|
|
if (spi_nbyte_read(offset + (page_size - remaining),
|
|
&buf[page_size - remaining], remaining)) {
|
|
printf_debug("Error reading");
|
|
return 1;
|
|
}
|
|
remaining = 0;
|
|
} else {
|
|
if (spi_nbyte_read(offset + (page_size - remaining),
|
|
&buf[page_size - remaining], maxdata)) {
|
|
printf_debug("Error reading");
|
|
return 1;
|
|
}
|
|
remaining -= maxdata;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ich_spi_write_page(struct flashchip *flash, uint8_t * bytes,
|
|
int offset, int maxdata)
|
|
{
|
|
int page_size = flash->page_size;
|
|
uint32_t remaining = page_size;
|
|
int a;
|
|
|
|
printf_debug("ich_spi_write_page: offset=%d, number=%d, buf=%p\n",
|
|
offset, page_size, bytes);
|
|
|
|
for (a = 0; a < page_size; a += maxdata) {
|
|
if (remaining < maxdata) {
|
|
if (run_opcode
|
|
(curopcodes->opcode[0],
|
|
offset + (page_size - remaining), remaining,
|
|
&bytes[page_size - remaining]) != 0) {
|
|
printf_debug("Error writing");
|
|
return 1;
|
|
}
|
|
remaining = 0;
|
|
} else {
|
|
if (run_opcode
|
|
(curopcodes->opcode[0],
|
|
offset + (page_size - remaining), maxdata,
|
|
&bytes[page_size - remaining]) != 0) {
|
|
printf_debug("Error writing");
|
|
return 1;
|
|
}
|
|
remaining -= maxdata;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ich_spi_read(struct flashchip *flash, uint8_t * buf)
|
|
{
|
|
int i, rc = 0;
|
|
int total_size = flash->total_size * 1024;
|
|
int page_size = flash->page_size;
|
|
int maxdata = 64;
|
|
|
|
if (flashbus == BUS_TYPE_VIA_SPI) {
|
|
maxdata = 16;
|
|
}
|
|
|
|
for (i = 0; (i < total_size / page_size) && (rc == 0); i++) {
|
|
rc = ich_spi_read_page(flash, (void *)(buf + i * page_size),
|
|
i * page_size, maxdata);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
int ich_spi_write(struct flashchip *flash, uint8_t * buf)
|
|
{
|
|
int i, j, rc = 0;
|
|
int total_size = flash->total_size * 1024;
|
|
int page_size = flash->page_size;
|
|
int erase_size = 64 * 1024;
|
|
int maxdata = 64;
|
|
|
|
spi_disable_blockprotect();
|
|
|
|
printf("Programming page: \n");
|
|
|
|
for (i = 0; i < total_size / erase_size; i++) {
|
|
/* FIMXE: call the chip-specific spi_block_erase_XX instead.
|
|
* For this, we need to add a block erase function to
|
|
* struct flashchip.
|
|
*/
|
|
rc = spi_block_erase_d8(flash, i * erase_size);
|
|
if (rc) {
|
|
printf("Error erasing block at 0x%x\n", i);
|
|
break;
|
|
}
|
|
|
|
if (flashbus == BUS_TYPE_VIA_SPI)
|
|
maxdata = 16;
|
|
|
|
for (j = 0; j < erase_size / page_size; j++) {
|
|
ich_spi_write_page(flash,
|
|
(void *)(buf + (i * erase_size) + (j * page_size)),
|
|
(i * erase_size) + (j * page_size), maxdata);
|
|
}
|
|
}
|
|
|
|
printf("\n");
|
|
|
|
return rc;
|
|
}
|
|
|
|
int ich_spi_command(unsigned int writecnt, unsigned int readcnt,
|
|
const unsigned char *writearr, unsigned char *readarr)
|
|
{
|
|
int a;
|
|
int opcode_index = -1;
|
|
const unsigned char cmd = *writearr;
|
|
OPCODE *opcode;
|
|
uint32_t addr = 0;
|
|
uint8_t *data;
|
|
int count;
|
|
|
|
/* program opcodes if not already done */
|
|
if (curopcodes == NULL) {
|
|
printf_debug("Programming OPCODES... ");
|
|
curopcodes = &O_ST_M25P;
|
|
program_opcodes(curopcodes);
|
|
printf_debug("done\n");
|
|
}
|
|
|
|
/* find cmd in opcodes-table */
|
|
for (a = 0; a < 8; a++) {
|
|
if ((curopcodes->opcode[a]).opcode == cmd) {
|
|
opcode_index = a;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* unknown / not programmed command */
|
|
if (opcode_index == -1) {
|
|
printf_debug("Invalid OPCODE 0x%02x\n", cmd);
|
|
return 1;
|
|
}
|
|
|
|
opcode = &(curopcodes->opcode[opcode_index]);
|
|
|
|
/* if opcode-type requires an address */
|
|
if (opcode->spi_type == SPI_OPCODE_TYPE_READ_WITH_ADDRESS ||
|
|
opcode->spi_type == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS) {
|
|
addr = (writearr[1] << 16) |
|
|
(writearr[2] << 8) | (writearr[3] << 0);
|
|
}
|
|
|
|
/* translate read/write array/count */
|
|
if (opcode->spi_type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS) {
|
|
data = (uint8_t *) (writearr + 1);
|
|
count = writecnt - 1;
|
|
} else if (opcode->spi_type == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS) {
|
|
data = (uint8_t *) (writearr + 4);
|
|
count = writecnt - 4;
|
|
} else {
|
|
data = (uint8_t *) readarr;
|
|
count = readcnt;
|
|
}
|
|
|
|
if (run_opcode(*opcode, addr, count, data) != 0) {
|
|
printf_debug("run OPCODE 0x%02x failed\n", opcode->opcode);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|