coreboot-kgpe-d16/targets/tyan
Uwe Hermann d436a4b4bc Correct the RAM checking code to _not_ check the range from 640 KB - 1 MB,
as that is not RAM but used for other stuff.

First try at PCI init added to src/mainboard/tyan/s1846/Config.lb.

Use a real payload (FILO) per default now.

Note: this cannot boot a payload, yet, but it gets a lot further now.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2623 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-03 08:50:37 +00:00
..
s1846 Correct the RAM checking code to _not_ check the range from 640 KB - 1 MB, 2007-05-03 08:50:37 +00:00
s2735 Uwe Hermann: 2006-09-06 16:42:51 +00:00
s2850 Uwe Hermann: 2006-09-06 16:42:51 +00:00
s2875 Uwe Hermann: 2006-09-06 16:42:51 +00:00
s2880 Uwe Hermann: 2006-09-06 16:42:51 +00:00
s2881 Uwe Hermann: 2006-09-06 16:42:51 +00:00
s2882 Uwe Hermann: 2006-09-06 16:42:51 +00:00
s2885 Uwe Hermann: 2006-09-06 16:42:51 +00:00
s2891 Uwe Hermann: 2006-09-06 16:42:51 +00:00
s2892 Uwe Hermann: 2006-09-06 16:42:51 +00:00
s2895 get_bus_cong using sysconf instead 2006-10-04 23:57:49 +00:00
s2912 Revert the image size increasing for abuild. It breaks more boards than 2007-04-25 00:23:39 +00:00
s4880 Uwe Hermann: 2006-09-06 16:42:51 +00:00
s4882 Uwe Hermann: 2006-09-06 16:42:51 +00:00