127 lines
3.9 KiB
C
127 lines
3.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
|
|
#include <libpayload.h>
|
|
#include <pci.h>
|
|
|
|
/*
|
|
* iATU Unroll-specific register definitions
|
|
*/
|
|
#define PCIE_ATU_UNR_REGION_CTRL1 0x00
|
|
#define PCIE_ATU_UNR_REGION_CTRL2 0x04
|
|
#define PCIE_ATU_UNR_LOWER_BASE 0x08
|
|
#define PCIE_ATU_UNR_UPPER_BASE 0x0C
|
|
#define PCIE_ATU_UNR_LIMIT 0x10
|
|
#define PCIE_ATU_UNR_LOWER_TARGET 0x14
|
|
#define PCIE_ATU_UNR_UPPER_TARGET 0x18
|
|
#define PCIE_ATU_REGION_INDEX0 0x0
|
|
#define PCIE_ATU_TYPE_CFG0 0x4
|
|
#define PCIE_ATU_TYPE_CFG1 0x5
|
|
#define PCIE_ATU_ENABLE BIT(31)
|
|
#define ATU_CTRL2 PCIE_ATU_UNR_REGION_CTRL2
|
|
#define ATU_ENABLE PCIE_ATU_ENABLE
|
|
|
|
#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
|
|
#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
|
|
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
|
|
#define LINK_WAIT_IATU_US 1000
|
|
#define LINK_WAIT_MAX_IATU_RETRIES 5
|
|
|
|
/* Register address builder */
|
|
#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) ((region) << 9)
|
|
|
|
#define lower_32_bits(n) ((u32)(n))
|
|
#define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))
|
|
|
|
/*
|
|
* ATU & endpoint config space base address offsets relative to
|
|
* PCIe controller base address.
|
|
*/
|
|
#define QCOM_ATU_BASE_OFFSET 0x1000
|
|
#define QCOM_EP_CFG_OFFSET 0x100000
|
|
#define QCOM_EP_CFG_SIZE 0x1000 /* 4K */
|
|
|
|
static void dw_pcie_writel_iatu(void *atu_base, unsigned short index,
|
|
uint32_t reg, uint32_t val)
|
|
{
|
|
uint32_t offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
|
|
|
|
write32(atu_base + offset + reg, val);
|
|
}
|
|
|
|
static uint32_t dw_pcie_readl_iatu(void *atu_base, unsigned short index,
|
|
uint32_t reg)
|
|
{
|
|
uint32_t offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
|
|
|
|
return read32(atu_base + offset + reg);
|
|
}
|
|
|
|
static void dw_pcie_prog_outbound_atu(void *atu_base, unsigned short index,
|
|
unsigned int type, uint64_t cfg_addr,
|
|
uint64_t pcie_addr, uint32_t cfg_size)
|
|
{
|
|
dw_pcie_writel_iatu(atu_base, index, PCIE_ATU_UNR_LOWER_BASE,
|
|
lower_32_bits(cfg_addr));
|
|
dw_pcie_writel_iatu(atu_base, index, PCIE_ATU_UNR_UPPER_BASE,
|
|
upper_32_bits(cfg_addr));
|
|
dw_pcie_writel_iatu(atu_base, index, PCIE_ATU_UNR_LIMIT,
|
|
lower_32_bits(cfg_addr + cfg_size - 1));
|
|
dw_pcie_writel_iatu(atu_base, index, PCIE_ATU_UNR_LOWER_TARGET,
|
|
lower_32_bits(pcie_addr));
|
|
dw_pcie_writel_iatu(atu_base, index, PCIE_ATU_UNR_UPPER_TARGET,
|
|
upper_32_bits(pcie_addr));
|
|
dw_pcie_writel_iatu(atu_base, index, PCIE_ATU_UNR_REGION_CTRL1, type);
|
|
dw_pcie_writel_iatu(atu_base, index, PCIE_ATU_UNR_REGION_CTRL2,
|
|
PCIE_ATU_ENABLE);
|
|
/*
|
|
* Make sure ATU enable takes effect before any subsequent config
|
|
* and I/O accesses.
|
|
*/
|
|
if (retry(LINK_WAIT_MAX_IATU_RETRIES,
|
|
(dw_pcie_readl_iatu(atu_base, index, ATU_CTRL2) & ATU_ENABLE),
|
|
udelay(LINK_WAIT_IATU_US)))
|
|
return;
|
|
|
|
printf("outbound iATU is couldn't be enabled after 5ms\n");
|
|
}
|
|
|
|
/* Get PCIe MMIO configuration space base address */
|
|
uintptr_t pci_map_bus(pcidev_t dev)
|
|
{
|
|
unsigned int atu_type, busdev;
|
|
uint32_t config_size;
|
|
void *cntrlr_base, *config_base, *atu_base;
|
|
unsigned int current_bus = PCI_BUS(dev);
|
|
unsigned int devfn = (PCI_SLOT(dev) << 3) | PCI_FUNC(dev);
|
|
static pcidev_t current_dev;
|
|
|
|
/*
|
|
* Extract PCIe controller base from coreboot and derive the ATU and
|
|
* endpoint config base addresses from it.
|
|
*/
|
|
cntrlr_base = (void *)lib_sysinfo.pcie_ctrl_base;
|
|
config_base = (void *)cntrlr_base + QCOM_EP_CFG_OFFSET;
|
|
config_size = (uint32_t)QCOM_EP_CFG_SIZE;
|
|
atu_base = (void *)cntrlr_base + QCOM_ATU_BASE_OFFSET;
|
|
|
|
/*
|
|
* Cache the dev. For same dev, ATU mapping is not needed for each
|
|
* request.
|
|
*/
|
|
if (current_dev == dev)
|
|
goto out;
|
|
|
|
current_dev = dev;
|
|
|
|
busdev = PCIE_ATU_BUS(current_bus) |
|
|
PCIE_ATU_DEV(PCI_SLOT(dev)) |
|
|
PCIE_ATU_FUNC(PCI_FUNC(dev));
|
|
|
|
atu_type = current_bus == 1 ? PCIE_ATU_TYPE_CFG0 : PCIE_ATU_TYPE_CFG1;
|
|
|
|
dw_pcie_prog_outbound_atu(atu_base, PCIE_ATU_REGION_INDEX0, atu_type,
|
|
(uint64_t)config_base, busdev, config_size);
|
|
out:
|
|
return (uintptr_t)config_base + (QCOM_EP_CFG_SIZE * devfn);
|
|
}
|