coreboot-kgpe-d16/payloads/libpayload/drivers/usb/ohci_rh.c

165 lines
5.2 KiB
C

/*
* This file is part of the libpayload project.
*
* Copyright (C) 2010 Patrick Georgi
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
//#define USB_DEBUG
#include <libpayload.h>
#include "ohci_private.h"
#include "ohci.h"
typedef struct {
int numports;
int *port;
} rh_inst_t;
#define RH_INST(dev) ((rh_inst_t*)(dev)->data)
static void
ohci_rh_enable_port (usbdev_t *dev, int port)
{
if (!(OHCI_INST(dev->controller)->opreg->HcRhPortStatus[port] & CurrentConnectStatus))
return;
OHCI_INST (dev->controller)->opreg->HcRhPortStatus[port] = SetPortEnable; // enable port
mdelay(10);
while (!(OHCI_INST (dev->controller)->opreg->HcRhPortStatus[port] & PortEnableStatus)) mdelay(1);
OHCI_INST (dev->controller)->opreg->HcRhPortStatus[port] = SetPortReset; // reset port
while (OHCI_INST (dev->controller)->opreg->HcRhPortStatus[port] & PortResetStatus) mdelay(1);
OHCI_INST (dev->controller)->opreg->HcRhPortStatus[port] = PortResetStatusChange;
}
/* disable root hub */
static void
ohci_rh_disable_port (usbdev_t *dev, int port)
{
OHCI_INST (dev->controller)->opreg->HcRhPortStatus[port] = ClearPortEnable; // disable port
while (OHCI_INST (dev->controller)->opreg->HcRhPortStatus[port] & PortEnableStatus) mdelay(1);
}
static void
ohci_rh_scanport (usbdev_t *dev, int port)
{
if (port >= RH_INST(dev)->numports) {
debug("Invalid port %d\n", port);
return;
}
/* device registered, and device change logged, so something must have happened */
if (RH_INST (dev)->port[port] != -1) {
usb_detach_device(dev->controller, RH_INST (dev)->port[port]);
RH_INST (dev)->port[port] = -1;
}
/* no device attached
previously registered devices are detached, nothing left to do */
if (!(OHCI_INST(dev->controller)->opreg->HcRhPortStatus[port] & CurrentConnectStatus))
return;
OHCI_INST (dev->controller)->opreg->HcRhPortStatus[port] = ConnectStatusChange; // clear port state change
ohci_rh_enable_port (dev, port);
mdelay(100); // wait for signal to stabilize
if (!(OHCI_INST(dev->controller)->opreg->HcRhPortStatus[port] & PortEnableStatus)) {
debug ("port enable failed\n");
return;
}
int speed = (OHCI_INST(dev->controller)->opreg->HcRhPortStatus[port] & LowSpeedDeviceAttached) != 0;
RH_INST (dev)->port[port] = usb_attach_device(dev->controller, dev->address, port, speed);
}
static int
ohci_rh_report_port_changes (usbdev_t *dev)
{
int i;
if (!(OHCI_INST (dev->controller)->opreg->HcInterruptStatus & RootHubStatusChange)) return -1;
OHCI_INST (dev->controller)->opreg->HcInterruptStatus = RootHubStatusChange;
debug("port change\n");
for (i = 0; i < RH_INST(dev)->numports; i++) {
// maybe detach+attach happened between two scans?
if (OHCI_INST (dev->controller)->opreg->HcRhPortStatus[i] & ConnectStatusChange) {
debug("attachment change on port %d\n", i);
return i;
}
}
// no change
return -1;
}
static void
ohci_rh_destroy (usbdev_t *dev)
{
int i;
for (i = 0; i < RH_INST (dev)->numports; i++)
ohci_rh_disable_port (dev, i);
free (RH_INST (dev));
}
static void
ohci_rh_poll (usbdev_t *dev)
{
int port;
while ((port = ohci_rh_report_port_changes (dev)) != -1)
ohci_rh_scanport (dev, port);
}
void
ohci_rh_init (usbdev_t *dev)
{
int i;
dev->destroy = ohci_rh_destroy;
dev->poll = ohci_rh_poll;
dev->data = malloc (sizeof (rh_inst_t));
if (!dev->data)
usb_fatal ("Not enough memory for OHCI RH.\n");
RH_INST (dev)->numports = OHCI_INST (dev->controller)->opreg->HcRhDescriptorA & NumberDownstreamPortsMask;
RH_INST (dev)->port = malloc(sizeof(int) * RH_INST (dev)->numports);
debug("%d ports registered\n", RH_INST (dev)->numports);
for (i = 0; i < RH_INST (dev)->numports; i++) {
ohci_rh_enable_port (dev, i);
RH_INST (dev)->port[i] = -1;
}
/* we can set them here because a root hub _really_ shouldn't
appear elsewhere */
dev->address = 0;
dev->hub = -1;
dev->port = -1;
debug("rh init done\n");
}