coreboot-kgpe-d16/src/mainboard/google/nyan_blaze
Vadim Bendebury f9fb0d9bf3 Use a common boardid.h instead of per board copies
There is no point in duplicating boardid.h per board - they are all
the same. Let's keep a single instance in the common include directory
and let the linker report a problem if one tries using this function
on a board where it is not supported.

BUG=chrome-os-partner:30489
TEST=verified that coreboot builds fine for nyan_big and nyan_blaze.

Original-Change-Id: Ifbe9c2287a1d828d4db74c637d1d02047ac4da25
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/209699
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 589e6415faf18ca6aaf44da343dd33eadc8a53d3)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>

Change-Id: I8eef89cb822611a0050e5a50fc4b970eebd8d962
Reviewed-on: http://review.coreboot.org/8666
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-13 23:01:54 +01:00
..
bct blaze: change ramcode 1000/1001/1010 to use 792MHz bct 2015-01-03 00:56:17 +01:00
boardid.c Use a common boardid.h instead of per board copies 2015-03-13 23:01:54 +01:00
bootblock.c
chromeos.c nyan: Ignore the recovery GPIO. 2015-01-04 00:12:55 +01:00
devicetree.cb nyan*: Add fast link training functions 2014-12-19 23:46:50 +01:00
Kconfig nyan*: Add eventlog support 2014-12-17 20:48:27 +01:00
mainboard.c nyan*: Set GEN2 I2C pads to open-drain mode 2014-12-31 05:26:51 +01:00
Makefile.inc vboot2: read dev and recovery switch 2015-01-27 01:43:31 +01:00
pmic.c Use a common boardid.h instead of per board copies 2015-03-13 23:01:54 +01:00
pmic.h
reset.c nyan*: I2C: Implement bus clear when 'ARB_LOST' error occurs 2014-12-26 19:39:16 +01:00
reset.h nyan*: I2C: Implement bus clear when 'ARB_LOST' error occurs 2014-12-26 19:39:16 +01:00
romstage.c nyan: Remove broken setup_display() from romstage 2015-03-13 18:43:19 +01:00
sdram_configs.c blaze: change ramcode 1000/1001/1010 to use 792MHz bct 2015-01-03 00:56:17 +01:00
sdram_configs.h