coreboot-libre-fam15h-rdimm/3rdparty/chromeec/baseboard/volteer/baseboard.h

91 lines
2.3 KiB
C
Raw Permalink Normal View History

2024-03-04 11:14:53 +01:00
/* Copyright 2019 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* Volteer baseboard configuration */
#ifndef __CROS_EC_BASEBOARD_H
#define __CROS_EC_BASEBOARD_H
/* NPCX7 config */
#define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */
#define NPCX_UART_MODULE2 1 /* GPIO64/65 are used as UART pins. */
/* Internal SPI flash on NPCX796FC is 512 kB */
#define CONFIG_FLASH_SIZE (512 * 1024)
#define CONFIG_SPI_FLASH_REGS
#define CONFIG_SPI_FLASH_W25Q80 /* Internal SPI flash type. */
/* EC Defines */
#define CONFIG_BOARD_VERSION_CBI
#define CONFIG_CRC8
#define CONFIG_CROS_BOARD_INFO
#define CONFIG_HIBERNATE_PSL
#define CONFIG_LED_COMMON
/* TODO(b/140557020): Define CONFIG_LED_ONOFF_STATES and
* CONFIG_LED_ONOFF_STATES_BAT_LOW when CONFIG_CHARGER is defined.
*/
#define CONFIG_LED_PWM
/* TODO(b/140557020): Remove this when CONFIG_CHARGER is defined. */
#define CONFIG_LED_PWM_CHARGE_STATE_ONLY
/* Although there are 2 LEDs, they are both controlled by the same lines. */
#define CONFIG_LED_PWM_COUNT 1
#define CONFIG_PWM
#define CONFIG_VBOOT_HASH
#define CONFIG_VSTORE
#define CONFIG_VSTORE_SLOT_COUNT 1
/* Host communication */
#define CONFIG_HOSTCMD_ESPI
/* Chipset config */
#define CONFIG_CHIPSET_TIGERLAKE
#define CONFIG_CHIPSET_RESET_HOOK
#define CONFIG_CPU_PROCHOT_ACTIVE_LOW
#define CONFIG_EXTPOWER_GPIO
#define CONFIG_POWER_BUTTON
#define CONFIG_POWER_BUTTON_X86
#define CONFIG_POWER_COMMON
#define CONFIG_POWER_S0IX
#define CONFIG_POWER_S0IX_FAILURE_DETECTION
#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE
#define CONFIG_BOARD_HAS_RTC_RESET
/* Common Keyboard Defines */
/* Sensors */
/* Common charger defines */
/* Common battery defines */
/* USB Type C and USB PD defines */
/* BC 1.2 */
/* I2C Bus Configuration */
#define CONFIG_I2C
#define I2C_PORT_SENSOR NPCX_I2C_PORT0_0
#define I2C_PORT_USB_C0 NPCX_I2C_PORT1_0
#define I2C_PORT_USB_C1 NPCX_I2C_PORT2_0
#define I2C_PORT_USB_1_MIX NPCX_I2C_PORT3_0
#define I2C_PORT_POWER NPCX_I2C_PORT5_0
#define I2C_PORT_EEPROM NPCX_I2C_PORT7_0
#define I2C_ADDR_EEPROM_FLAGS 0x50
#define CONFIG_I2C_MASTER
#ifndef __ASSEMBLER__
enum pwm_channel {
PWM_CH_LED1_BLUE = 0,
PWM_CH_LED2_GREEN,
PWM_CH_LED3_RED,
PWM_CH_COUNT
};
#endif /* !__ASSEMBLER__ */
#endif /* __CROS_EC_BASEBOARD_H */