coreboot-libre-fam15h-rdimm/3rdparty/chromeec/board/jerry/board.h

107 lines
2.8 KiB
C
Raw Permalink Normal View History

2024-03-04 11:14:53 +01:00
/* Copyright 2014 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* Veyron board configuration */
#ifndef __CROS_EC_BOARD_H
#define __CROS_EC_BOARD_H
/* Increase size of UART TX buffer. */
#undef CONFIG_UART_TX_BUF_SIZE
#define CONFIG_UART_TX_BUF_SIZE 1024
/* Optional features */
#define CONFIG_AP_HANG_DETECT
#define CONFIG_BATTERY_CUT_OFF
#define CONFIG_BATTERY_SMART
#define CONFIG_BOARD_PRE_INIT
#define CONFIG_CHARGER
#define CONFIG_CHARGER_BQ24715
#define CONFIG_CHARGER_DISCHARGE_ON_AC
#define CONFIG_CHIPSET_RK3288
#define CONFIG_EXTPOWER_GPIO
#define CONFIG_FORCE_CONSOLE_RESUME
#define CONFIG_HOST_COMMAND_STATUS
#define CONFIG_HOSTCMD_VBNV_CONTEXT
#define CONFIG_I2C
#define CONFIG_I2C_MASTER
#define CONFIG_I2C_VIRTUAL_BATTERY
#define CONFIG_KEYBOARD_COL2_INVERTED
#define CONFIG_KEYBOARD_PROTOCOL_MKBP
#define CONFIG_LED_COMMON
#define CONFIG_LED_POLICY_STD
#define CONFIG_LED_BAT_ACTIVE_LOW
#define CONFIG_LED_POWER_ACTIVE_LOW
#define CONFIG_LOW_POWER_IDLE
#define CONFIG_LOW_POWER_S0
#define CONFIG_MKBP_USE_GPIO
#define CONFIG_POWER_BUTTON
#define CONFIG_POWER_BUTTON_ACTIVE_STATE 1
#define CONFIG_POWER_COMMON
#define CONFIG_PWM
#define CONFIG_SPI
#define CONFIG_STM_HWTIMER32
#define CONFIG_UART_RX_DMA
#define CONFIG_VBOOT_HASH
#define CONFIG_HOSTCMD_ALIGNED
#undef CONFIG_CONSOLE_CMDHELP
#undef CONFIG_CONSOLE_HISTORY
#undef CONFIG_SOFTWARE_PANIC
#undef CONFIG_WATCHDOG_HELP
#undef CONFIG_CMD_KEYBOARD
/* Not enough RO flash space */
#undef CONFIG_HOSTCMD_GET_UPTIME_INFO
#define CONFIG_HIBERNATE_WAKEUP_PINS (STM32_PWR_CSR_EWUP1 | STM32_PWR_CSR_EWUP6)
#ifndef __ASSEMBLER__
/* 48 MHz SYSCLK clock frequency */
#define CPU_CLOCK 48000000
/* Keyboard output port list */
#define KB_OUT_PORT_LIST GPIO_A, GPIO_B, GPIO_C
/* Single I2C port, where the EC is the master. */
#define I2C_PORT_MASTER 0
#define I2C_PORT_BATTERY I2C_PORT_MASTER
#define I2C_PORT_CHARGER I2C_PORT_MASTER
#define I2C_PORT_VIRTUAL_BATTERY I2C_PORT_MASTER
/* Timer selection */
#define TIM_CLOCK32 2
#define TIM_WATCHDOG 4
#include "gpio_signal.h"
enum power_signal {
RK_POWER_GOOD = 0,
RK_SUSPEND_ASSERTED,
/* Number of power signals */
POWER_SIGNAL_COUNT
};
enum pwm_channel {
PWM_CH_POWER_LED = 0,
/* Number of PWM channels */
PWM_CH_COUNT
};
/* Charger module */
#define CONFIG_CHARGER_SENSE_RESISTOR 10 /* Charge sense resistor, mOhm */
#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 /* Input sensor resistor, mOhm */
/* Input current limit for 45W AC adapter:
* 45W/19V*85%=2013mA, choose the closest charger setting = 2048mA
*/
#define CONFIG_CHARGER_INPUT_CURRENT 2048 /* mA, based on Link HW design */
#define CONFIG_CHARGER_CURRENT_LIMIT 3000 /* PL102 inductor 3.0A(3.8A) */
#endif /* !__ASSEMBLER__ */
#endif /* __CROS_EC_BOARD_H */