GNUBoot
/
coreboot-libre-fam15h-rdimm
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
coreboot-libre-fam15h-rdimm/3rdparty/chromeec/common/charge_manager.c

1412 lines
39 KiB
C
Raw Permalink Normal View History

Initial commit
2024-03-04 11:14:53 +01:00
/* Copyright 2014 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#include "adc.h"
#include "atomic.h"
#include "battery.h"
#include "charge_manager.h"
#include "charge_ramp.h"
#include "charger.h"
#include "console.h"
#include "gpio.h"
#include "hooks.h"
#include "host_command.h"
#include "system.h"
#include "tcpm.h"
#include "timer.h"
#include "usb_pd.h"
#include "usb_pd_tcpm.h"
#include "util.h"
#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
#define POWER(charge_port) ((charge_port.current) * (charge_port.voltage))
/* Timeout for delayed override power swap, allow for 500ms extra */
#define POWER_SWAP_TIMEOUT (PD_T_SRC_RECOVER_MAX + PD_T_SRC_TURN_ON + \
PD_T_SAFE_0V + 500 * MSEC)
/*
* Default charge supplier priority
*
* - Always pick dedicated charge if present since that is the best product
* decision.
* - Pick PD negotiated chargers over everything else since they have the most
* power potential and they may not currently be negotiated at a high power.
* (and they can at least provide 15W)
* - Pick Type-C which supplier current >= 1.5A, which has higher prioirty
* than the BC1.2 and Type-C with current under 1.5A. (USB-C spec 1.3
* Table 4-17: TYPEC 3.0A, 1.5A > BC1.2 > TYPEC under 1.5A)
* - Then pick among the propreitary and BC1.2 chargers which ever has the
* highest available power.
* - Last, pick one from the rest suppliers. Also note that some boards assume
* wireless suppliers as low priority.
*/
__overridable const int supplier_priority[] = {
#if CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0
[CHARGE_SUPPLIER_DEDICATED] = 0,
#endif
[CHARGE_SUPPLIER_PD] = 1,
[CHARGE_SUPPLIER_TYPEC] = 2,
[CHARGE_SUPPLIER_TYPEC_DTS] = 2,
#ifdef CHARGE_MANAGER_BC12
[CHARGE_SUPPLIER_PROPRIETARY] = 3,
[CHARGE_SUPPLIER_BC12_DCP] = 3,
[CHARGE_SUPPLIER_BC12_CDP] = 3,
[CHARGE_SUPPLIER_BC12_SDP] = 3,
[CHARGE_SUPPLIER_TYPEC_UNDER_1_5A] = 4,
[CHARGE_SUPPLIER_OTHER] = 4,
[CHARGE_SUPPLIER_VBUS] = 4,
#endif
#ifdef CONFIG_WIRELESS_CHARGER_P9221_R7
[CHARGE_SUPPLIER_WPC_BPP] = 5,
[CHARGE_SUPPLIER_WPC_EPP] = 5,
[CHARGE_SUPPLIER_WPC_GPP] = 5,
#endif
};
BUILD_ASSERT(ARRAY_SIZE(supplier_priority) == CHARGE_SUPPLIER_COUNT);
/* Keep track of available charge for each charge port. */
static struct charge_port_info available_charge[CHARGE_SUPPLIER_COUNT]
[CHARGE_PORT_COUNT];
/* Keep track of when the supplier on each port is registered. */
static timestamp_t registration_time[CHARGE_PORT_COUNT];
/*
* Charge current ceiling (mA) for ports. This can be set to temporarily limit
* the charge pulled from a port, without influencing the port selection logic.
* The ceiling can be set independently from several requestors, with the
* minimum ceiling taking effect.
*/
static int charge_ceil[CHARGE_PORT_COUNT][CEIL_REQUESTOR_COUNT];
/* Dual-role capability of attached partner port */
static enum dualrole_capabilities dualrole_capability[CHARGE_PORT_COUNT];
#ifdef CONFIG_USB_PD_LOGGING
/* Mark port as dirty when making changes, for later logging */
static int save_log[CHARGE_PORT_COUNT];
#endif
/* Store current state of port enable / charge current. */
static int charge_port = CHARGE_PORT_NONE;
static int charge_current = CHARGE_CURRENT_UNINITIALIZED;
static int charge_current_uncapped = CHARGE_CURRENT_UNINITIALIZED;
static int charge_voltage;
static int charge_supplier = CHARGE_SUPPLIER_NONE;
static int override_port = OVERRIDE_OFF;
static int delayed_override_port = OVERRIDE_OFF;
static timestamp_t delayed_override_deadline;
static uint8_t source_port_rp[CONFIG_USB_PD_PORT_COUNT];
#ifdef CONFIG_USB_PD_MAX_TOTAL_SOURCE_CURRENT
/* 3A on one port and 1.5A on the rest */
BUILD_ASSERT(CONFIG_USB_PD_PORT_COUNT * 1500 + 1500 <=
CONFIG_USB_PD_MAX_TOTAL_SOURCE_CURRENT);
#endif
/*
* charge_manager initially operates in safe mode until asked to leave (through
* charge_manager_leave_safe_mode()). While in safe mode, the following
* behavior is altered:
*
* 1) All chargers are considered dedicated (and thus are valid charge source
* candidates) for the purpose of port selection.
* 2) Charge ceilings are ignored. Most significantly, ILIM won't drop on PD
* voltage transition. If current load is high during transition, some
* chargers may brown-out.
* 3) CHARGE_PORT_NONE will not be selected (POR default charge port will
* remain selected rather than CHARGE_PORT_NONE).
*
* After leaving safe mode, charge_manager reverts to its normal behavior and
* immediately selects charge port and current using standard rules.
*/
#ifdef CONFIG_CHARGE_MANAGER_SAFE_MODE
static int left_safe_mode;
#else
static const int left_safe_mode = 1;
#endif
enum charge_manager_change_type {
CHANGE_CHARGE,
CHANGE_DUALROLE,
};
static int is_pd_port(int port)
{
return 0 <= port && port < CONFIG_USB_PD_PORT_COUNT;
}
static int is_sink(int port)
{
if (!is_pd_port(port))
return board_charge_port_is_sink(port);
return pd_get_role(port) == PD_ROLE_SINK;
}
#ifndef TEST_BUILD
static int is_connected(int port)
{
if (!is_pd_port(port))
return board_charge_port_is_connected(port);
return pd_is_connected(port);
}
#endif /* !TEST_BUILD */
#ifndef CONFIG_CHARGE_MANAGER_DRP_CHARGING
/**
* In certain cases we need to override the default behavior of not charging
* from non-dedicated chargers. If the system is in RO and locked, we have no
* way of determining the actual dualrole capability of the charger because
* PD communication is not allowed, so we must assume that it is dedicated.
* Also, if no battery is present, the charger may be our only source of power,
* so again we must assume that the charger is dedicated.
*
* @return 1 when we need to override the a non-dedicated charger
* to be a dedicated one, 0 otherwise.
*/
static int charge_manager_spoof_dualrole_capability(void)
{
return (system_get_image_copy() == SYSTEM_IMAGE_RO &&
system_is_locked()) || !left_safe_mode;
}
#endif /* !CONFIG_CHARGE_MANAGER_DRP_CHARGING */
/**
* Initialize available charge. Run before board init, so board init can
* initialize data, if needed.
*/
static void charge_manager_init(void)
{
int i, j;
for (i = 0; i < CHARGE_PORT_COUNT; ++i) {
for (j = 0; j < CHARGE_SUPPLIER_COUNT; ++j) {
available_charge[j][i].current =
CHARGE_CURRENT_UNINITIALIZED;
available_charge[j][i].voltage =
CHARGE_VOLTAGE_UNINITIALIZED;
}
for (j = 0; j < CEIL_REQUESTOR_COUNT; ++j)
charge_ceil[i][j] = CHARGE_CEIL_NONE;
if (!is_pd_port(i))
dualrole_capability[i] = CAP_DEDICATED;
if (is_pd_port(i))
source_port_rp[i] = CONFIG_USB_PD_PULLUP;
}
}
DECLARE_HOOK(HOOK_INIT, charge_manager_init, HOOK_PRIO_CHARGE_MANAGER_INIT);
/**
* Check if the charge manager is seeded.
*
* @return 1 if all ports/suppliers have reported
* with some initial charge, 0 otherwise.
*/
static int charge_manager_is_seeded(void)
{
/* Once we're seeded, we don't need to check again. */
static int is_seeded;
int i, j;
if (is_seeded)
return 1;
for (i = 0; i < CHARGE_SUPPLIER_COUNT; ++i)
for (j = 0; j < CHARGE_PORT_COUNT; ++j)
if (available_charge[i][j].current ==
CHARGE_CURRENT_UNINITIALIZED ||
available_charge[i][j].voltage ==
CHARGE_VOLTAGE_UNINITIALIZED)
return 0;
is_seeded = 1;
return 1;
}
#ifndef TEST_BUILD
/**
* Get the maximum charge current for a port.
*
* @param port Charge port.
* @return Charge current (mA).
*/
static int charge_manager_get_source_current(int port)
{
if (!is_pd_port(port))
return 0;
switch (source_port_rp[port]) {
case TYPEC_RP_3A0:
return 3000;
case TYPEC_RP_1A5:
return 1500;
case TYPEC_RP_USB:
default:
return 500;
}
}
/*
* Find a supplier considering available current, voltage, power, and priority.
*/
static enum charge_supplier find_supplier(int port, enum charge_supplier sup,
int min_cur)
{
int i;
for (i = 0; i < CHARGE_SUPPLIER_COUNT; ++i) {
if (available_charge[i][port].current <= min_cur ||
available_charge[i][port].voltage <= 0)
/* Doesn't meet volt or current requirement. Skip it. */
continue;
if (sup == CHARGE_SUPPLIER_NONE)
/* Haven't found any yet. Take it unconditionally. */
sup = i;
else if (supplier_priority[sup] < supplier_priority[i])
/* There is already a higher priority supplier. */
continue;
else if (supplier_priority[i] < supplier_priority[sup])
/* This has a higher priority. Take it. */
sup = i;
else if (POWER(available_charge[i][port]) >
POWER(available_charge[sup][port]))
/* Priority is tie. Take it if power is higher. */
sup = i;
}
return sup;
}
/**
* Fills passed power_info structure with current info about the passed port.
*
* @param port Charge port.
* @param r USB PD power info to be updated.
*/
static void charge_manager_fill_power_info(int port,
struct ec_response_usb_pd_power_info *r)
{
int sup = CHARGE_SUPPLIER_NONE;
/* Determine supplier information to show. */
if (port == charge_port) {
sup = charge_supplier;
} else {
/* Consider available current */
sup = find_supplier(port, sup, 0);
if (sup == CHARGE_SUPPLIER_NONE)
/* Ignore available current */
sup = find_supplier(port, sup, -1);
}
/* Fill in power role */
if (charge_port == port)
r->role = USB_PD_PORT_POWER_SINK;
else if (is_connected(port) && !is_sink(port))
r->role = USB_PD_PORT_POWER_SOURCE;
else if (sup != CHARGE_SUPPLIER_NONE)
r->role = USB_PD_PORT_POWER_SINK_NOT_CHARGING;
else
r->role = USB_PD_PORT_POWER_DISCONNECTED;
/* Is port partner dual-role capable */
r->dualrole = (dualrole_capability[port] == CAP_DUALROLE);
if (sup == CHARGE_SUPPLIER_NONE ||
r->role == USB_PD_PORT_POWER_SOURCE) {
if (is_pd_port(port)) {
r->type = USB_CHG_TYPE_NONE;
r->meas.voltage_max = 0;
r->meas.voltage_now =
r->role == USB_PD_PORT_POWER_SOURCE ? 5000 : 0;
r->meas.current_max =
charge_manager_get_source_current(port);
r->max_power = 0;
} else {
r->type = USB_CHG_TYPE_NONE;
board_fill_source_power_info(port, r);
}
} else {
int use_ramp_current;
switch (sup) {
case CHARGE_SUPPLIER_PD:
r->type = USB_CHG_TYPE_PD;
break;
case CHARGE_SUPPLIER_TYPEC:
case CHARGE_SUPPLIER_TYPEC_DTS:
r->type = USB_CHG_TYPE_C;
break;
#ifdef CHARGE_MANAGER_BC12
case CHARGE_SUPPLIER_PROPRIETARY:
r->type = USB_CHG_TYPE_PROPRIETARY;
break;
case CHARGE_SUPPLIER_BC12_DCP:
r->type = USB_CHG_TYPE_BC12_DCP;
break;
case CHARGE_SUPPLIER_BC12_CDP:
r->type = USB_CHG_TYPE_BC12_CDP;
break;
case CHARGE_SUPPLIER_BC12_SDP:
r->type = USB_CHG_TYPE_BC12_SDP;
break;
case CHARGE_SUPPLIER_VBUS:
r->type = USB_CHG_TYPE_VBUS;
break;
#endif
#ifdef CONFIG_WIRELESS_CHARGER_P9221_R7
/*
* Todo:need kernel add wpc device node in power_supply
* before that use USB_CHG_TYPE_PROPRIETARY to present WPC.
*/
case CHARGE_SUPPLIER_WPC_BPP:
case CHARGE_SUPPLIER_WPC_EPP:
case CHARGE_SUPPLIER_WPC_GPP:
r->type = USB_CHG_TYPE_PROPRIETARY;
break;
#endif
#if CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0
case CHARGE_SUPPLIER_DEDICATED:
r->type = USB_CHG_TYPE_DEDICATED;
break;
#endif
default:
#ifdef CONFIG_WIRELESS_CHARGER_P9221_R7
r->type = USB_CHG_TYPE_VBUS;
#else
r->type = USB_CHG_TYPE_OTHER;
#endif
}
r->meas.voltage_max = available_charge[sup][port].voltage;
/*
* Report unknown charger CHARGE_DETECT_DELAY after supplier
* change since PD negotiation may take time.
*/
if (get_time().val < registration_time[port].val +
CHARGE_DETECT_DELAY)
r->type = USB_CHG_TYPE_UNKNOWN;
#if defined(HAS_TASK_CHG_RAMP) || defined(CONFIG_CHARGE_RAMP_HW)
/* Read ramped current if active charging port */
use_ramp_current =
(charge_port == port) && chg_ramp_allowed(sup);
#else
use_ramp_current = 0;
#endif
if (use_ramp_current) {
/* Current limit is output of ramp module */
r->meas.current_lim = chg_ramp_get_current_limit();
/*
* If ramp is allowed, then the max current depends
* on if ramp is stable. If ramp is stable, then
* max current is same as input current limit. If
* ramp is not stable, then we report the maximum
* current we could ramp up to for this supplier.
* If ramp is not allowed, max current is just the
* available charge current.
*/
r->meas.current_max = chg_ramp_is_stable() ?
r->meas.current_lim : chg_ramp_max(sup,
available_charge[sup][port].current);
r->max_power =
r->meas.current_max * r->meas.voltage_max;
} else {
r->meas.current_max = r->meas.current_lim =
available_charge[sup][port].current;
r->max_power = POWER(available_charge[sup][port]);
}
/*
* If we are sourcing power, or sinking but not charging, then
* VBUS must be 5V. If we are charging, then read VBUS ADC.
*/
if (r->role == USB_PD_PORT_POWER_SINK_NOT_CHARGING)
r->meas.voltage_now = 5000;
else {
#if defined(CONFIG_USB_PD_VBUS_MEASURE_CHARGER)
r->meas.voltage_now = charger_get_vbus_voltage(port);
#elif defined(CONFIG_USB_PD_VBUS_MEASURE_ADC_EACH_PORT)
r->meas.voltage_now =
adc_read_channel(board_get_vbus_adc(port));
#elif defined(CONFIG_USB_PD_VBUS_MEASURE_NOT_PRESENT)
/* No VBUS ADC channel - voltage is unknown */
r->meas.voltage_now = 0;
#else
/* There is a single ADC that measures joint Vbus */
r->meas.voltage_now = adc_read_channel(ADC_VBUS);
#endif
}
}
}
#endif /* TEST_BUILD */
#ifdef CONFIG_USB_PD_LOGGING
/**
* Saves a power state log entry with the current info about the passed port.
*/
void charge_manager_save_log(int port)
{
uint16_t flags = 0;
struct ec_response_usb_pd_power_info pinfo;
if (!is_pd_port(port))
return;
save_log[port] = 0;
charge_manager_fill_power_info(port, &pinfo);
/* Flags are stored in the data field */
if (port == override_port)
flags |= CHARGE_FLAGS_OVERRIDE;
if (port == delayed_override_port)
flags |= CHARGE_FLAGS_DELAYED_OVERRIDE;
flags |= pinfo.role | (pinfo.type << CHARGE_FLAGS_TYPE_SHIFT) |
(pinfo.dualrole ? CHARGE_FLAGS_DUAL_ROLE : 0);
pd_log_event(PD_EVENT_MCU_CHARGE,
PD_LOG_PORT_SIZE(port, sizeof(pinfo.meas)),
flags, &pinfo.meas);
}
#endif /* CONFIG_USB_PD_LOGGING */
/**
* Attempt to switch to power source on port if applicable.
*
* @param port USB-C port to be swapped.
*/
static void charge_manager_switch_to_source(int port)
{
if (!is_pd_port(port))
return;
/* If connected to dual-role device, then ask for a swap */
if (dualrole_capability[port] == CAP_DUALROLE && is_sink(port))
pd_request_power_swap(port);
}
/**
* Return the computed charge ceiling for a port, which represents the
* minimum ceiling among all valid requestors.
*
* @param port Charge port.
* @return Charge ceiling (mA) or CHARGE_CEIL_NONE.
*/
static int charge_manager_get_ceil(int port)
{
int ceil = CHARGE_CEIL_NONE;
int val, i;
for (i = 0; i < CEIL_REQUESTOR_COUNT; ++i) {
val = charge_ceil[port][i];
if (val != CHARGE_CEIL_NONE &&
(ceil == CHARGE_CEIL_NONE || val < ceil))
ceil = val;
}
return ceil;
}
/**
* Select the 'best' charge port, as defined by the supplier heirarchy and the
* ability of the port to provide power.
*
* @param new_port Pointer to the best charge port by definition.
* @param new_supplier Pointer to the best charge supplier by definition.
*/
static void charge_manager_get_best_charge_port(int *new_port,
int *new_supplier)
{
int supplier = CHARGE_SUPPLIER_NONE;
int port = CHARGE_PORT_NONE;
int best_port_power = -1, candidate_port_power;
int i, j;
/* Skip port selection on OVERRIDE_DONT_CHARGE. */
if (override_port != OVERRIDE_DONT_CHARGE) {
/*
* Charge supplier selection logic:
* 1. Prefer higher priority supply.
* 2. Prefer higher power over lower in case priority is tied.
* 3. Prefer current charge port over new port in case (1)
* and (2) are tied.
* available_charge can be changed at any time by other tasks,
* so make no assumptions about its consistency.
*/
for (i = 0; i < CHARGE_SUPPLIER_COUNT; ++i)
for (j = 0; j < CHARGE_PORT_COUNT; ++j) {
/*
* Skip this supplier if there is no
* available charge.
*/
if (available_charge[i][j].current == 0 ||
available_charge[i][j].voltage == 0)
continue;
/*
* Don't select this port if we have a
* charge on another override port.
*/
if (override_port != OVERRIDE_OFF &&
override_port == port &&
override_port != j)
continue;
#ifndef CONFIG_CHARGE_MANAGER_DRP_CHARGING
/*
* Don't charge from a dual-role port unless
* it is our override port.
*/
if (dualrole_capability[j] != CAP_DEDICATED &&
override_port != j &&
!charge_manager_spoof_dualrole_capability())
continue;
#endif
candidate_port_power =
POWER(available_charge[i][j]);
/* Select if no supplier chosen yet. */
if (supplier == CHARGE_SUPPLIER_NONE ||
/* ..or if supplier priority is higher. */
supplier_priority[i] <
supplier_priority[supplier] ||
/* ..or if this is our override port. */
(j == override_port &&
port != override_port) ||
/* ..or if priority is tied and.. */
(supplier_priority[i] ==
supplier_priority[supplier] &&
/* candidate port can supply more power or.. */
(candidate_port_power > best_port_power ||
/*
* candidate port is the active port and can
* supply the same amount of power.
*/
(candidate_port_power == best_port_power &&
charge_port == j)))) {
supplier = i;
port = j;
best_port_power = candidate_port_power;
}
}
}
*new_port = port;
*new_supplier = supplier;
}
/**
* Charge manager refresh -- responsible for selecting the active charge port
* and charge power. Called as a deferred task.
*/
static void charge_manager_refresh(void)
{
/* Always initialize charge port on first pass */
static int active_charge_port_initialized;
int new_supplier, new_port;
int new_charge_current, new_charge_current_uncapped;
int new_charge_voltage, i;
int updated_new_port = CHARGE_PORT_NONE;
int updated_old_port = CHARGE_PORT_NONE;
int ceil;
int power_changed = 0;
/* Hunt for an acceptable charge port */
while (1) {
charge_manager_get_best_charge_port(&new_port, &new_supplier);
if (!left_safe_mode && new_port == CHARGE_PORT_NONE)
return;
/*
* If the port or supplier changed, make an attempt to switch to
* the port. We will re-set the active port on a supplier change
* to give the board-level function another chance to reject
* the port, for example, if the port has become a charge
* source.
*/
if ((active_charge_port_initialized &&
new_port == charge_port &&
new_supplier == charge_supplier) ||
board_set_active_charge_port(new_port) == EC_SUCCESS)
break;
/* 'Dont charge' request must be accepted. */
ASSERT(new_port != CHARGE_PORT_NONE);
/*
* Zero the available charge on the rejected port so that
* it is no longer chosen.
*/
for (i = 0; i < CHARGE_SUPPLIER_COUNT; ++i) {
available_charge[i][new_port].current = 0;
available_charge[i][new_port].voltage = 0;
}
}
active_charge_port_initialized = 1;
/*
* Clear override if it wasn't selected as the 'best' port -- it means
* that no charge is available on the port, or the port was rejected.
*/
if (override_port >= 0 && override_port != new_port)
override_port = OVERRIDE_OFF;
if (new_supplier == CHARGE_SUPPLIER_NONE) {
new_charge_current = 0;
new_charge_current_uncapped = 0;
new_charge_voltage = 0;
} else {
new_charge_current_uncapped =
available_charge[new_supplier][new_port].current;
#ifdef CONFIG_CHARGE_RAMP_HW
/*
* Allow to set the maximum current value, so the hardware can
* know the range of acceptable current values for its ramping.
*/
if (chg_ramp_allowed(new_supplier))
new_charge_current_uncapped =
chg_ramp_max(new_supplier,
new_charge_current_uncapped);
#endif /* CONFIG_CHARGE_RAMP_HW */
/* Enforce port charge ceiling. */
ceil = charge_manager_get_ceil(new_port);
if (left_safe_mode && ceil != CHARGE_CEIL_NONE)
new_charge_current = MIN(ceil,
new_charge_current_uncapped);
else
new_charge_current = new_charge_current_uncapped;
new_charge_voltage =
available_charge[new_supplier][new_port].voltage;
}
/* Change the charge limit + charge port/supplier if modified. */
if (new_port != charge_port || new_charge_current != charge_current ||
new_supplier != charge_supplier) {
#ifdef HAS_TASK_CHG_RAMP
chg_ramp_charge_supplier_change(
new_port, new_supplier, new_charge_current,
registration_time[new_port],
new_charge_voltage);
#else
#ifdef CONFIG_CHARGE_RAMP_HW
/* Enable or disable charge ramp */
charger_set_hw_ramp(chg_ramp_allowed(new_supplier));
#endif
board_set_charge_limit(new_port, new_supplier,
new_charge_current,
new_charge_current_uncapped,
new_charge_voltage);
#endif /* HAS_TASK_CHG_RAMP */
power_changed = 1;
CPRINTS("CL: p%d s%d i%d v%d", new_port, new_supplier,
new_charge_current, new_charge_voltage);
}
/*
* Signal new power request only if the port changed, the voltage
* on the same port changed, or the actual uncapped current
* on the same port changed (don't consider ceil).
*/
if (new_port != CHARGE_PORT_NONE &&
(new_port != charge_port ||
new_charge_current_uncapped != charge_current_uncapped ||
new_charge_voltage != charge_voltage))
updated_new_port = new_port;
/* If charge port changed, cleanup old port */
if (charge_port != new_port && charge_port != CHARGE_PORT_NONE) {
/* Check if need power swap */
charge_manager_switch_to_source(charge_port);
/* Signal new power request on old port */
updated_old_port = charge_port;
}
/* Update globals to reflect current state. */
charge_current = new_charge_current;
charge_current_uncapped = new_charge_current_uncapped;
charge_voltage = new_charge_voltage;
charge_supplier = new_supplier;
charge_port = new_port;
#ifdef CONFIG_USB_PD_LOGGING
/*
* Write a log under the following conditions:
* 1. A port becomes active or
* 2. A port becomes inactive or
* 3. The active charge port power limit changes or
* 4. Any supplier change on an inactive port
*/
if (updated_new_port != CHARGE_PORT_NONE)
save_log[updated_new_port] = 1;
/* Don't log non-meaningful changes on charge port */
else if (charge_port != CHARGE_PORT_NONE)
save_log[charge_port] = 0;
if (updated_old_port != CHARGE_PORT_NONE)
save_log[updated_old_port] = 1;
for (i = 0; i < CONFIG_USB_PD_PORT_COUNT; ++i)
if (save_log[i])
charge_manager_save_log(i);
#endif
/* New power requests must be set only after updating the globals. */
if (is_pd_port(updated_new_port))
pd_set_new_power_request(updated_new_port);
if (is_pd_port(updated_old_port))
pd_set_new_power_request(updated_old_port);
if (power_changed)
/* notify host of power info change */
pd_send_host_event(PD_EVENT_POWER_CHANGE);
}
DECLARE_DEFERRED(charge_manager_refresh);
/**
* Called when charge override times out waiting for power swap.
*/
static void charge_override_timeout(void)
{
delayed_override_port = OVERRIDE_OFF;
pd_send_host_event(PD_EVENT_POWER_CHANGE);
}
DECLARE_DEFERRED(charge_override_timeout);
/**
* Called CHARGE_DETECT_DELAY after the most recent charge change on a port.
*/
static void charger_detect_debounced(void)
{
/* Inform host that charger detection is debounced. */
pd_send_host_event(PD_EVENT_POWER_CHANGE);
}
DECLARE_DEFERRED(charger_detect_debounced);
/**
* Update charge parameters for a given port / supplier.
*
* @param change Type of change.
* @param supplier Charge supplier to be updated.
* @param port Charge port to be updated.
* @param charge Charge port current / voltage.
*/
static void charge_manager_make_change(enum charge_manager_change_type change,
int supplier,
int port,
const struct charge_port_info *charge)
{
int i;
int clear_override = 0;
/* Determine if this is a change which can affect charge status */
switch (change) {
case CHANGE_CHARGE:
/* Ignore changes where charge is identical */
if (available_charge[supplier][port].current ==
charge->current &&
available_charge[supplier][port].voltage ==
charge->voltage)
return;
if (charge->current > 0 &&
available_charge[supplier][port].current == 0)
clear_override = 1;
#ifdef CONFIG_USB_PD_LOGGING
save_log[port] = 1;
#endif
break;
case CHANGE_DUALROLE:
/*
* Ignore all except for transition to non-dualrole,
* which may occur some time after we see a charge
*/
#ifndef CONFIG_CHARGE_MANAGER_DRP_CHARGING
if (dualrole_capability[port] != CAP_DEDICATED)
#endif
return;
/* Clear override only if a charge is present on the port */
for (i = 0; i < CHARGE_SUPPLIER_COUNT; ++i)
if (available_charge[i][port].current > 0) {
clear_override = 1;
break;
}
/*
* If there is no charge present on the port, the dualrole
* change is meaningless to charge_manager.
*/
if (!clear_override)
return;
break;
}
/* Remove override when a charger is plugged */
if (clear_override && override_port != port
#ifndef CONFIG_CHARGE_MANAGER_DRP_CHARGING
/* only remove override when it's a dedicated charger */
&& dualrole_capability[port] == CAP_DEDICATED
#endif
) {
override_port = OVERRIDE_OFF;
if (delayed_override_port != OVERRIDE_OFF) {
delayed_override_port = OVERRIDE_OFF;
hook_call_deferred(&charge_override_timeout_data, -1);
}
}
if (change == CHANGE_CHARGE) {
available_charge[supplier][port].current = charge->current;
available_charge[supplier][port].voltage = charge->voltage;
registration_time[port] = get_time();
/*
* After CHARGE_DETECT_DELAY, inform the host that charger
* detection has been debounced. Since only one deferred
* routine exists for all ports, the deferred call for a given
* port may potentially be cancelled. This is mostly harmless
* since cancellation implies that PD_EVENT_POWER_CHANGE was
* just sent due to the power change on another port.
*/
if (charge->current > 0)
hook_call_deferred(&charger_detect_debounced_data,
CHARGE_DETECT_DELAY);
/*
* If we have a charge on our delayed override port within
* the deadline, make it our override port.
*/
if (port == delayed_override_port && charge->current > 0 &&
is_sink(delayed_override_port) &&
get_time().val < delayed_override_deadline.val) {
delayed_override_port = OVERRIDE_OFF;
hook_call_deferred(&charge_override_timeout_data, -1);
charge_manager_set_override(port);
}
}
/*
* Don't call charge_manager_refresh unless all ports +
* suppliers have reported in. We don't want to make changes
* to our charge port until we are certain we know what is
* attached.
*/
if (charge_manager_is_seeded())
hook_call_deferred(&charge_manager_refresh_data, 0);
}
void pd_set_input_current_limit(int port, uint32_t max_ma,
uint32_t supply_voltage)
{
struct charge_port_info charge;
charge.current = max_ma;
charge.voltage = supply_voltage;
charge_manager_update_charge(CHARGE_SUPPLIER_PD, port, &charge);
}
void typec_set_input_current_limit(int port, typec_current_t max_ma,
uint32_t supply_voltage)
{
struct charge_port_info charge;
int i;
int supplier;
int dts = !!(max_ma & TYPEC_CURRENT_DTS_MASK);
static const enum charge_supplier typec_suppliers[] = {
CHARGE_SUPPLIER_TYPEC,
CHARGE_SUPPLIER_TYPEC_DTS,
#ifdef CHARGE_MANAGER_BC12
CHARGE_SUPPLIER_TYPEC_UNDER_1_5A,
#endif /* CHARGE_MANAGER_BC12 */
};
charge.current = max_ma & TYPEC_CURRENT_ILIM_MASK;
charge.voltage = supply_voltage;
#if !defined(HAS_TASK_CHG_RAMP) && !defined(CONFIG_CHARGE_RAMP_HW)
/*
* DTS sources such as suzy-q may not be able to actually deliver
* their advertised current, so limit it to reduce chance of OC,
* if we can't ramp.
*/
if (dts)
charge.current = MIN(charge.current, 500);
#endif
supplier = dts ? CHARGE_SUPPLIER_TYPEC_DTS : CHARGE_SUPPLIER_TYPEC;
#ifdef CHARGE_MANAGER_BC12
/*
* According to USB-C spec 1.3 Table 4-17 "Precedence of power source
* usage", the priority should be: USB-C 3.0A, 1.5A > BC1.2 > USB-C
* under 1.5A. Choosed the corresponding supplier type, according to
* charge current, to update.
*/
if (charge.current < 1500)
supplier = CHARGE_SUPPLIER_TYPEC_UNDER_1_5A;
#endif /* CHARGE_MANAGER_BC12 */
charge_manager_update_charge(supplier, port, &charge);
/*
* TYPEC / TYPEC-DTS / TYPEC-UNDER_1_5A should be mutually exclusive.
* Zero'ing all the other suppliers.
*/
for (i = 0; i < ARRAY_SIZE(typec_suppliers); ++i)
if (supplier != typec_suppliers[i])
charge_manager_update_charge(typec_suppliers[i], port,
NULL);
}
void charge_manager_update_charge(int supplier,
int port,
const struct charge_port_info *charge)
{
struct charge_port_info zero = {0};
if (!charge)
charge = &zero;
charge_manager_make_change(CHANGE_CHARGE, supplier, port, charge);
}
void charge_manager_update_dualrole(int port, enum dualrole_capabilities cap)
{
if (!is_pd_port(port))
return;
/* Ignore when capability is unchanged */
if (cap != dualrole_capability[port]) {
dualrole_capability[port] = cap;
charge_manager_make_change(CHANGE_DUALROLE, 0, port, NULL);
}
}
#ifdef CONFIG_CHARGE_MANAGER_SAFE_MODE
void charge_manager_leave_safe_mode(void)
{
if (left_safe_mode)
return;
CPRINTS("%s()", __func__);
cflush();
left_safe_mode = 1;
if (charge_manager_is_seeded())
hook_call_deferred(&charge_manager_refresh_data, 0);
}
#endif
void charge_manager_set_ceil(int port, enum ceil_requestor requestor, int ceil)
{
if (charge_ceil[port][requestor] != ceil) {
charge_ceil[port][requestor] = ceil;
if (port == charge_port && charge_manager_is_seeded())
hook_call_deferred(&charge_manager_refresh_data, 0);
}
}
void charge_manager_force_ceil(int port, int ceil)
{
/*
* Force our input current to ceil if we're exceeding it, without
* waiting for our deferred task to run.
*/
if (left_safe_mode && port == charge_port && ceil < charge_current)
board_set_charge_limit(port, CHARGE_SUPPLIER_PD, ceil,
charge_current_uncapped, charge_voltage);
/*
* Now inform charge_manager so it stays in sync with the state of
* the world.
*/
charge_manager_set_ceil(port, CEIL_REQUESTOR_PD, ceil);
}
int charge_manager_set_override(int port)
{
int retval = EC_SUCCESS;
CPRINTS("Charge Override: %d", port);
/*
* If attempting to change the override port, then return
* error. Since we may be in the middle of a power swap on
* the original override port, it's too complicated to
* guarantee that the original override port is switched back
* to source.
*/
if (delayed_override_port != OVERRIDE_OFF)
return EC_ERROR_BUSY;
/* Set the override port if it's a sink. */
if (port < 0 || is_sink(port)) {
if (override_port != port) {
override_port = port;
if (charge_manager_is_seeded())
hook_call_deferred(
&charge_manager_refresh_data, 0);
}
}
/*
* If the attached device is capable of being a sink, request a
* power swap and set the delayed override for swap completion.
*/
else if (!is_sink(port) && dualrole_capability[port] == CAP_DUALROLE) {
delayed_override_deadline.val = get_time().val +
POWER_SWAP_TIMEOUT;
delayed_override_port = port;
hook_call_deferred(&charge_override_timeout_data,
POWER_SWAP_TIMEOUT);
pd_request_power_swap(port);
/* Can't charge from requested port -- return error. */
} else
retval = EC_ERROR_INVAL;
return retval;
}
int charge_manager_get_override(void)
{
return override_port;
}
int charge_manager_get_active_charge_port(void)
{
return charge_port;
}
int charge_manager_get_charger_current(void)
{
return charge_current;
}
int charge_manager_get_charger_voltage(void)
{
return charge_voltage;
}
int charge_manager_get_power_limit_uw(void)
{
int current_ma = charge_current;
int voltage_mv = charge_voltage;
if (current_ma == CHARGE_CURRENT_UNINITIALIZED ||
voltage_mv == CHARGE_VOLTAGE_UNINITIALIZED)
return 0;
else
return current_ma * voltage_mv;
}
#ifdef CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT
/* Bitmap of ports used as power source */
static volatile uint32_t source_port_bitmap;
BUILD_ASSERT(sizeof(source_port_bitmap)*8 >= CONFIG_USB_PD_PORT_COUNT);
static inline int has_other_active_source(int port)
{
return source_port_bitmap & ~BIT(port);
}
static inline int is_active_source(int port)
{
return source_port_bitmap & BIT(port);
}
static int can_supply_max_current(int port)
{
#ifdef CONFIG_USB_PD_MAX_TOTAL_SOURCE_CURRENT
/*
* This guarantees active 3A source continues to supply 3A.
*
* Since redistribution occurs sequentially, younger ports get
* priority. Priority surfaces only when 3A source is released.
* That is, when 3A source is released, the youngest active
* port gets 3A.
*/
int p;
if (!is_active_source(port))
/* Non-active ports don't get 3A */
return 0;
for (p = 0; p < CONFIG_USB_PD_PORT_COUNT; p++) {
if (p == port)
continue;
if (source_port_rp[p] ==
CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT)
return 0;
}
return 1;
#else
return is_active_source(port) && !has_other_active_source(port);
#endif /* CONFIG_USB_PD_MAX_TOTAL_SOURCE_CURRENT */
}
void charge_manager_source_port(int port, int enable)
{
uint32_t prev_bitmap = source_port_bitmap;
int p, rp;
if (enable)
atomic_or(&source_port_bitmap, 1 << port);
else
atomic_clear(&source_port_bitmap, 1 << port);
/* No change, exit early. */
if (prev_bitmap == source_port_bitmap)
return;
/* Set port limit according to policy */
for (p = 0; p < CONFIG_USB_PD_PORT_COUNT; p++) {
rp = can_supply_max_current(p) ?
CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT :
CONFIG_USB_PD_PULLUP;
source_port_rp[p] = rp;
#ifdef CONFIG_USB_PD_LOGGING
if (is_connected(p) && !is_sink(p))
charge_manager_save_log(p);
#endif
typec_set_source_current_limit(p, rp);
tcpm_select_rp_value(p, rp);
pd_update_contract(p);
}
}
int charge_manager_get_source_pdo(const uint32_t **src_pdo, const int port)
{
if (can_supply_max_current(port)) {
*src_pdo = pd_src_pdo_max;
return pd_src_pdo_max_cnt;
}
*src_pdo = pd_src_pdo;
return pd_src_pdo_cnt;
}
#endif /* CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT */
#ifndef TEST_BUILD
static enum ec_status hc_pd_power_info(struct host_cmd_handler_args *args)
{
const struct ec_params_usb_pd_power_info *p = args->params;
struct ec_response_usb_pd_power_info *r = args->response;
int port = p->port;
/* If host is asking for the charging port, set port appropriately */
if (port == PD_POWER_CHARGING_PORT)
port = charge_port;
if (port >= CHARGE_PORT_COUNT)
return EC_RES_INVALID_PARAM;
charge_manager_fill_power_info(port, r);
args->response_size = sizeof(*r);
return EC_RES_SUCCESS;
}
DECLARE_HOST_COMMAND(EC_CMD_USB_PD_POWER_INFO,
hc_pd_power_info,
EC_VER_MASK(0));
#endif /* TEST_BUILD */
static enum ec_status hc_charge_port_count(struct host_cmd_handler_args *args)
{
struct ec_response_charge_port_count *resp = args->response;
args->response_size = sizeof(*resp);
resp->port_count = CHARGE_PORT_COUNT;
return EC_RES_SUCCESS;
}
DECLARE_HOST_COMMAND(EC_CMD_CHARGE_PORT_COUNT,
hc_charge_port_count,
EC_VER_MASK(0));
static enum ec_status
hc_charge_port_override(struct host_cmd_handler_args *args)
{
const struct ec_params_charge_port_override *p = args->params;
const int16_t override_port = p->override_port;
if (override_port < OVERRIDE_DONT_CHARGE ||
override_port >= CHARGE_PORT_COUNT)
return EC_RES_INVALID_PARAM;
return charge_manager_set_override(override_port) == EC_SUCCESS ?
EC_RES_SUCCESS : EC_RES_ERROR;
}
DECLARE_HOST_COMMAND(EC_CMD_PD_CHARGE_PORT_OVERRIDE,
hc_charge_port_override,
EC_VER_MASK(0));
#if CONFIG_DEDICATED_CHARGE_PORT_COUNT > 0
static enum ec_status hc_override_dedicated_charger_limit(
struct host_cmd_handler_args *args)
{
const struct ec_params_dedicated_charger_limit *p = args->params;
struct charge_port_info ci = {
.current = p->current_lim,
.voltage = p->voltage_lim,
};
/*
* Allow a change only if the dedicated charge port is used. Host needs
* to apply a change every time a dedicated charger is plugged.
*/
if (charge_port != DEDICATED_CHARGE_PORT)
return EC_RES_UNAVAILABLE;
charge_manager_update_charge(CHARGE_SUPPLIER_DEDICATED,
DEDICATED_CHARGE_PORT, &ci);
return EC_RES_SUCCESS;
}
DECLARE_HOST_COMMAND(EC_CMD_OVERRIDE_DEDICATED_CHARGER_LIMIT,
hc_override_dedicated_charger_limit,
EC_VER_MASK(0));
#endif
static int command_charge_port_override(int argc, char **argv)
{
int port = OVERRIDE_OFF;
int ret = EC_SUCCESS;
char *e;
if (argc >= 2) {
port = strtoi(argv[1], &e, 0);
if (*e || port < OVERRIDE_DONT_CHARGE ||
port >= CHARGE_PORT_COUNT)
return EC_ERROR_PARAM1;
ret = charge_manager_set_override(port);
}
ccprintf("Override: %d\n", (argc >= 2 && ret == EC_SUCCESS) ?
port : override_port);
return ret;
}
DECLARE_CONSOLE_COMMAND(chgoverride, command_charge_port_override,
"[port | -1 | -2]",
"Force charging from a given port (-1 = off, -2 = disable charging)");
#ifdef CONFIG_CHARGE_MANAGER_EXTERNAL_POWER_LIMIT
static void charge_manager_set_external_power_limit(int current_lim,
int voltage_lim)
{
int port;
if (current_lim == EC_POWER_LIMIT_NONE)
current_lim = CHARGE_CEIL_NONE;
if (voltage_lim == EC_POWER_LIMIT_NONE)
voltage_lim = PD_MAX_VOLTAGE_MV;
for (port = 0; port < CONFIG_USB_PD_PORT_COUNT; ++port) {
charge_manager_set_ceil(port, CEIL_REQUESTOR_HOST, current_lim);
pd_set_external_voltage_limit(port, voltage_lim);
}
}
/*
* On transition out of S0, disable all external power limits, in case AP
* failed to clear them.
*/
static void charge_manager_external_power_limit_off(void)
{
charge_manager_set_external_power_limit(EC_POWER_LIMIT_NONE,
EC_POWER_LIMIT_NONE);
}
DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, charge_manager_external_power_limit_off,
HOOK_PRIO_DEFAULT);
static enum ec_status
hc_external_power_limit(struct host_cmd_handler_args *args)
{
const struct ec_params_external_power_limit_v1 *p = args->params;
charge_manager_set_external_power_limit(p->current_lim,
p->voltage_lim);
return EC_RES_SUCCESS;
}
DECLARE_HOST_COMMAND(EC_CMD_EXTERNAL_POWER_LIMIT,
hc_external_power_limit,
EC_VER_MASK(1));
static int command_external_power_limit(int argc, char **argv)
{
int max_current;
int max_voltage;
char *e;
if (argc >= 2) {
max_current = strtoi(argv[1], &e, 10);
if (*e)
return EC_ERROR_PARAM1;
} else
max_current = EC_POWER_LIMIT_NONE;
if (argc >= 3) {
max_voltage = strtoi(argv[2], &e, 10);
if (*e)
return EC_ERROR_PARAM1;
} else
max_voltage = EC_POWER_LIMIT_NONE;
charge_manager_set_external_power_limit(max_current, max_voltage);
ccprintf("max req: %dmA %dmV\n", max_current, max_voltage);
return EC_SUCCESS;
}
DECLARE_CONSOLE_COMMAND(chglim, command_external_power_limit,
"[max_current (mA)] [max_voltage (mV)]",
"Set max charger current / voltage");
#endif /* CONFIG_CHARGE_MANAGER_EXTERNAL_POWER_LIMIT */
#ifdef CONFIG_CMD_CHARGE_SUPPLIER_INFO
static int charge_supplier_info(int argc, char **argv)
{
ccprintf("port=%d, type=%d, cur=%dmA, vtg=%dmV, lsm=%d\n",
charge_manager_get_active_charge_port(),
charge_supplier,
charge_current,
charge_voltage,
left_safe_mode);
return 0;
}
DECLARE_CONSOLE_COMMAND(chgsup, charge_supplier_info,
NULL, "print chg supplier info");
#endif
__overridable
int board_charge_port_is_sink(int port)
{
return 1;
}
__overridable
int board_charge_port_is_connected(int port)
{
return 1;
}
__overridable
void board_fill_source_power_info(int port,
struct ec_response_usb_pd_power_info *r)
{
r->meas.voltage_now = 0;
r->meas.voltage_max = 0;
r->meas.current_max = 0;
r->meas.current_lim = 0;
r->max_power = 0;
}