66 lines
2.3 KiB
C
66 lines
2.3 KiB
C
|
/* Copyright 2018 The Chromium OS Authors. All rights reserved.
|
||
|
|
* Use of this source code is governed by a BSD-style license that can be
|
||
|
|
* found in the LICENSE file.
|
||
|
|
*
|
||
|
|
* Battery pack vendor provided charging profile
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "battery_fuel_gauge.h"
|
||
|
|
#include "common.h"
|
||
|
|
#include "util.h"
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Battery info for all DragonEgg battery types. Note that the fields
|
||
|
|
* start_charging_min/max and charging_min/max are not used for the charger.
|
||
|
|
* The effective temperature limits are given by discharging_min/max_c.
|
||
|
|
*
|
||
|
|
* Fuel Gauge (FG) parameters which are used for determining if the battery
|
||
|
|
* is connected, the appropriate ship mode (battery cutoff) command, and the
|
||
|
|
* charge/discharge FETs status.
|
||
|
|
*
|
||
|
|
* Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
|
||
|
|
* register. For some batteries, the charge/discharge FET bits are set when
|
||
|
|
* charging/discharging is active, in other types, these bits set mean that
|
||
|
|
* charging/discharging is disabled. Therefore, in addition to the mask for
|
||
|
|
* these bits, a disconnect value must be specified. Note that for TI fuel
|
||
|
|
* gauge, the charge/discharge FET status is found in Operation Status (0x54),
|
||
|
|
* but a read of Manufacturer Access (0x00) will return the lower 16 bits of
|
||
|
|
* Operation status which contains the FET status bits.
|
||
|
|
*
|
||
|
|
* The assumption for battery types supported is that the charge/discharge FET
|
||
|
|
* status can be read with a sb_read() command and therefore, only the register
|
||
|
|
* address, mask, and disconnect value need to be provided.
|
||
|
|
*/
|
||
|
|
const struct board_batt_params board_battery_info[] = {
|
||
|
|
/* Panasonic AP1505L Battery Information */
|
||
|
|
[BATTERY_0RD] = {
|
||
|
|
.fuel_gauge = {
|
||
|
|
.manuf_name = "SMP-COS5940",
|
||
|
|
.ship_mode = {
|
||
|
|
.reg_addr = 0x0,
|
||
|
|
.reg_data = { 0x10, 0x10 },
|
||
|
|
},
|
||
|
|
.fet = {
|
||
|
|
.reg_addr = 0x0,
|
||
|
|
.reg_mask = 0x2000,
|
||
|
|
.disconnect_val = 0x2000,
|
||
|
|
}
|
||
|
|
},
|
||
|
|
.batt_info = {
|
||
|
|
.voltage_max = 8800,
|
||
|
|
.voltage_normal = 7700, /* mV */
|
||
|
|
.voltage_min = 6000, /* mV */
|
||
|
|
.precharge_current = 256, /* mA */
|
||
|
|
.start_charging_min_c = 0,
|
||
|
|
.start_charging_max_c = 60,
|
||
|
|
.charging_min_c = 0,
|
||
|
|
.charging_max_c = 60,
|
||
|
|
.discharging_min_c = 0,
|
||
|
|
.discharging_max_c = 60,
|
||
|
|
},
|
||
|
|
},
|
||
|
|
};
|
||
|
|
BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
|
||
|
|
|
||
|
|
const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_0RD;
|