212 lines
9.4 KiB
YAML
212 lines
9.4 KiB
YAML
|
# Size of extra stack frame needed by exception context switch.
|
||
|
|
# See core/cortex-m/switch.S
|
||
|
|
exception_frame_size: 224
|
||
|
|
# Add some missing calls.
|
||
|
|
add:
|
||
|
|
# TCPC stuff:
|
||
|
|
tcpm_init.lto_priv.255[driver/tcpm/tcpm.h:77]:
|
||
|
|
- tcpci_tcpm_init
|
||
|
|
tcpm_release[driver/tcpm/tcpm.h:90]:
|
||
|
|
- ps8xxx_tcpm_release
|
||
|
|
tcpm_get_cc.lto_priv.246[driver/tcpm/tcpm.h:95]:
|
||
|
|
- tcpci_tcpm_get_cc
|
||
|
|
tcpm_select_rp_value[driver/tcpm/tcpm.h:105]:
|
||
|
|
- tcpci_tcpm_select_rp_value
|
||
|
|
tcpm_set_cc.lto_priv.239[driver/tcpm/tcpm.h:110]:
|
||
|
|
- tcpci_tcpm_set_cc
|
||
|
|
tcpm_set_polarity[driver/tcpm/tcpm.h:115]:
|
||
|
|
- tcpci_tcpm_set_polarity
|
||
|
|
tcpm_set_vconn.lto_priv.249[driver/tcpm/tcpm.h:120]:
|
||
|
|
- tcpci_tcpm_set_vconn
|
||
|
|
tcpm_set_msg_header[driver/tcpm/tcpm.h:125]:
|
||
|
|
- tcpci_tcpm_set_msg_header
|
||
|
|
tcpm_set_rx_enable.lto_priv.252[driver/tcpm/tcpm.h:131]:
|
||
|
|
- tcpci_tcpm_set_rx_enable
|
||
|
|
tcpm_get_message[driver/tcpm/tcpm.h:136]:
|
||
|
|
- tcpci_tcpm_get_message
|
||
|
|
tcpm_transmit[driver/tcpm/tcpm.h:142]:
|
||
|
|
- ps8xxx_tcpm_transmit
|
||
|
|
tcpc_alert[driver/tcpm/tcpm.h:147]:
|
||
|
|
- tcpci_tcpc_alert
|
||
|
|
tcpc_discharge_vbus[driver/tcpm/tcpm.h:152]:
|
||
|
|
- tcpci_tcpc_discharge_vbus
|
||
|
|
tcpm_set_drp_toggle[driver/tcpm/tcpm.h:163]:
|
||
|
|
- tcpci_tcpc_drp_toggle
|
||
|
|
tcpm_get_chip_info[driver/tcpm/tcpm.h:185]:
|
||
|
|
- tcpci_get_chip_info
|
||
|
|
board_tcpc_init[board/nautilus/board.c:233]:
|
||
|
|
- ps8xxx_tcpc_update_hpd_status
|
||
|
|
tcpci_tcpc_drp_toggle[driver/tcpm/tcpci.c:148]:
|
||
|
|
- None
|
||
|
|
# USB mux stuff
|
||
|
|
usb_mux_init[driver/usb_mux.c:25]:
|
||
|
|
- tcpci_tcpm_mux_init
|
||
|
|
usb_mux_init[driver/usb_mux.c:31]:
|
||
|
|
- None
|
||
|
|
usb_mux_set[driver/usb_mux.c:52]:
|
||
|
|
- tcpci_tcpm_mux_set
|
||
|
|
usb_mux_get[driver/usb_mux.c:71]:
|
||
|
|
- tcpci_tcpm_mux_get
|
||
|
|
usb_mux_flip[driver/usb_mux.c:92]:
|
||
|
|
- tcpci_tcpm_mux_get
|
||
|
|
usb_mux_flip[driver/usb_mux.c:103]:
|
||
|
|
- tcpci_tcpm_mux_set
|
||
|
|
hc_usb_pd_mux_info[driver/usb_mux.c:169]:
|
||
|
|
- tcpci_tcpm_mux_get
|
||
|
|
svdm_dp_post_config.lto_priv.271[board/nautilus/usb_pd_policy.c:363]:
|
||
|
|
- ps8xxx_tcpc_update_hpd_status
|
||
|
|
svdm_dp_attention.lto_priv.272[board/nautilus/usb_pd_policy.c:378]:
|
||
|
|
- ps8xxx_tcpc_update_hpd_status
|
||
|
|
svdm_exit_dp_mode.lto_priv.273[board/nautilus/usb_pd_policy.c:389]:
|
||
|
|
- ps8xxx_tcpc_update_hpd_status
|
||
|
|
# pd_svdm
|
||
|
|
pd_dfp_enter_mode[common/usb_pd_policy.c:459]:
|
||
|
|
- svdm_enter_dp_mode
|
||
|
|
dfp_consume_attention.lto_priv.259[common/usb_pd_policy.c:497]:
|
||
|
|
- svdm_dp_attention
|
||
|
|
pd_dfp_exit_mode[common/usb_pd_policy.c:563]:
|
||
|
|
- svdm_exit_dp_mode
|
||
|
|
pd_dfp_exit_mode[common/usb_pd_policy.c:580]:
|
||
|
|
- svdm_exit_dp_mode
|
||
|
|
pd_svdm[common/usb_pd_policy.c:767]:
|
||
|
|
- svdm_dp_status
|
||
|
|
pd_svdm[common/usb_pd_policy.c:778]:
|
||
|
|
- svdm_dp_config
|
||
|
|
pd_svdm[common/usb_pd_policy.c:784]:
|
||
|
|
- svdm_dp_post_config
|
||
|
|
# Motion sense
|
||
|
|
queue_advance_head[common/queue.c:105]:
|
||
|
|
- queue_action_null
|
||
|
|
queue_advance_tail[common/queue.c:116]:
|
||
|
|
- queue_action_null
|
||
|
|
motion_sense_set_data_rate[common/motion_sense.c:270]:
|
||
|
|
- set_data_rate[driver/accelgyro_bmi160.c]
|
||
|
|
- set_data_rate[driver/accel_bma2x2.c]
|
||
|
|
motion_sense_set_data_rate[common/motion_sense.c:289]:
|
||
|
|
- get_data_rate[driver/accelgyro_bmi160.c]
|
||
|
|
- get_data_rate[driver/accel_bma2x2.c]
|
||
|
|
motion_sense_set_ec_rate_from_ap[common/motion_sense.c:308]:
|
||
|
|
- get_data_rate[driver/accelgyro_bmi160.c]
|
||
|
|
- get_data_rate[driver/accel_bma2x2.c]
|
||
|
|
motion_sense_set_motion_intervals.lto_priv.303[common/motion_sense.c:414]:
|
||
|
|
- get_data_rate[driver/accelgyro_bmi160.c]
|
||
|
|
- get_data_rate[driver/accel_bma2x2.c]
|
||
|
|
motion_sense_init[common/motion_sense.c:450]:
|
||
|
|
- init[driver/accelgyro_bmi160.c]
|
||
|
|
- init[driver/accel_bma2x2.c]
|
||
|
|
sensor_init_done[common/motion_sense.c:471]:
|
||
|
|
- set_range[driver/accelgyro_bmi160.c]
|
||
|
|
- set_range[driver/accel_bma2x2.c]
|
||
|
|
sensor_init_done[common/motion_sense.c:474]:
|
||
|
|
- get_range[driver/accelgyro_bmi160.c]
|
||
|
|
- get_range[driver/accel_bma2x2.c]
|
||
|
|
motion_sense_process.isra.9[common/motion_sense.c:721]:
|
||
|
|
- irq_handler[driver/accelgyro_bmi160.c]
|
||
|
|
host_cmd_motion_sense[common/motion_sense.c:1251]:
|
||
|
|
- set_range[driver/accelgyro_bmi160.c]
|
||
|
|
- set_range[driver/accel_bma2x2.c]
|
||
|
|
host_cmd_motion_sense[common/motion_sense.c:1259]:
|
||
|
|
- get_range[driver/accelgyro_bmi160.c]
|
||
|
|
- get_range[driver/accel_bma2x2.c]
|
||
|
|
host_cmd_motion_sense[common/motion_sense.c:1274]:
|
||
|
|
- set_offset[driver/accelgyro_bmi160.c]
|
||
|
|
- set_offset[driver/accel_bma2x2.c]
|
||
|
|
host_cmd_motion_sense[common/motion_sense.c:1297]:
|
||
|
|
- perform_calib[driver/accelgyro_bmi160.c]
|
||
|
|
host_cmd_motion_sense[common/motion_sense.c:1300]:
|
||
|
|
- get_offset[driver/accelgyro_bmi160.c]
|
||
|
|
- get_offset[driver/accel_bma2x2.c]
|
||
|
|
command_accelrange[common/motion_sense.c:1515]:
|
||
|
|
- set_range[driver/accelgyro_bmi160.c]
|
||
|
|
- set_range[driver/accel_bma2x2.c]
|
||
|
|
command_accelrange[common/motion_sense.c:1520]:
|
||
|
|
- get_range[driver/accelgyro_bmi160.c]
|
||
|
|
- get_range[driver/accel_bma2x2.c]
|
||
|
|
host_cmd_motion_sense[common/motion_sense.c:1520]:
|
||
|
|
- get_range[driver/accelgyro_bmi160.c]
|
||
|
|
- get_range[driver/accel_bma2x2.c]
|
||
|
|
command_accelresolution[common/motion_sense.c:1564]:
|
||
|
|
- None
|
||
|
|
command_accelresolution[common/motion_sense.c:1568]:
|
||
|
|
- get_resolution[driver/accelgyro_bmi160.c]
|
||
|
|
- get_resolution[driver/accel_bma2x2.c]
|
||
|
|
command_accel_data_rate[common/motion_sense.c:1623]:
|
||
|
|
- get_data_rate[driver/accelgyro_bmi160.c]
|
||
|
|
- get_data_rate[driver/accel_bma2x2.c]
|
||
|
|
command_accel_read_xyz[common/motion_sense.c:1659]:
|
||
|
|
- read[driver/accelgyro_bmi160.c]
|
||
|
|
- read[driver/accel_bma2x2.c]
|
||
|
|
calculate_lid_angle[common/motion_lid.c:255]:
|
||
|
|
- get_range[driver/accelgyro_bmi160.c]
|
||
|
|
- get_range[driver/accel_bma2x2.c]
|
||
|
|
calculate_lid_angle[common/motion_lid.c:256]:
|
||
|
|
- get_range[driver/accelgyro_bmi160.c]
|
||
|
|
- get_range[driver/accel_bma2x2.c]
|
||
|
|
# Temp (see temp_sensors array in board file)
|
||
|
|
temp_sensor_read[common/temp_sensor.c:26]:
|
||
|
|
- charge_get_battery_temp
|
||
|
|
- bd99992gw_get_val
|
||
|
|
# Misc
|
||
|
|
jump_to_image[common/system.c:568]:
|
||
|
|
- None
|
||
|
|
system_download_from_flash[chip/npcx/system-npcx5.c:257]:
|
||
|
|
- None
|
||
|
|
__hibernate_npcx_series[chip/npcx/system-npcx5.c:144]:
|
||
|
|
- None
|
||
|
|
handle_command[common/console.c:248]:
|
||
|
|
- { name: __cmds, stride: 16, offset: 4 }
|
||
|
|
hook_task[common/hooks.c:197]:
|
||
|
|
- { name: __deferred_funcs, stride: 4, offset: 0 }
|
||
|
|
- { name: __hooks_second, stride: 8, offset: 0 }
|
||
|
|
- { name: __hooks_tick, stride: 8, offset: 0 }
|
||
|
|
# Note: This assumes worse case, where all hook functions can be called from
|
||
|
|
# any hook_notify call
|
||
|
|
# Generate using `grep hooks_.*_end build/nautilus/R*/ec.R*.smap |
|
||
|
|
# sed -e 's/.*\(__hooks.*\)_end/ - { name: \1, stride: 8, offset: 0 }/' |
|
||
|
|
# sort -u`
|
||
|
|
hook_notify[common/hooks.c:127]:
|
||
|
|
- { name: __hooks_ac_change, stride: 8, offset: 0 }
|
||
|
|
- { name: __hooks_battery_soc_change, stride: 8, offset: 0 }
|
||
|
|
- { name: __hooks_chipset_pre_init, stride: 8, offset: 0 }
|
||
|
|
- { name: __hooks_chipset_reset, stride: 8, offset: 0 }
|
||
|
|
- { name: __hooks_chipset_resume, stride: 8, offset: 0 }
|
||
|
|
- { name: __hooks_chipset_shutdown, stride: 8, offset: 0 }
|
||
|
|
- { name: __hooks_chipset_startup, stride: 8, offset: 0 }
|
||
|
|
- { name: __hooks_chipset_suspend, stride: 8, offset: 0 }
|
||
|
|
- { name: __hooks_freq_change, stride: 8, offset: 0 }
|
||
|
|
- { name: __hooks_lid_change, stride: 8, offset: 0 }
|
||
|
|
- { name: __hooks_pre_freq_change, stride: 8, offset: 0 }
|
||
|
|
- { name: __hooks_pwrbtn_change, stride: 8, offset: 0 }
|
||
|
|
- { name: __hooks_sysjump, stride: 8, offset: 0 }
|
||
|
|
- { name: __hooks_tablet_mode_change, stride: 8, offset: 0 }
|
||
|
|
mkbp_get_next_event[common/mkbp_event.c:130]:
|
||
|
|
- { name: __mkbp_evt_srcs, stride: 8, offset: 4 }
|
||
|
|
host_send_response[common/host_command.c:153]:
|
||
|
|
- lpc_send_response
|
||
|
|
host_packet_respond[common/host_command.c:240]:
|
||
|
|
- lpc_send_response
|
||
|
|
host_command_process[common/host_command.c:704]:
|
||
|
|
- { name: __hcmds, stride: 12, offset: 0 }
|
||
|
|
# gpio_interrupt.lto_priv.407[chip/npcx/gpio.c:479]
|
||
|
|
vfnprintf:
|
||
|
|
# This covers all the addchar in vfnprintf, but stackanalyzer does not
|
||
|
|
# realize that...
|
||
|
|
- __tx_char
|
||
|
|
i2c_command_passthru[common/i2c_master.c:597]:
|
||
|
|
- None
|
||
|
|
remove:
|
||
|
|
# Remove all callsites pointing to panic_assert_fail.
|
||
|
|
- panic_assert_fail
|
||
|
|
# Remove hook paths that don't make sense
|
||
|
|
- [ [ common_intel_x86_power_handle_state, power_button_change_deferred, hook_task, lpc_chipset_reset, espi_chipset_reset ], hook_notify, powerbtn_x86_lid_change ]
|
||
|
|
- [ system_common_shutdown, hook_notify, system_run_image_copy ]
|
||
|
|
- [ jump_to_image, hook_notify, [ powerbtn_x86_lid_change, system_common_shutdown, power_up_inhibited_cb, motion_sense_shutdown, motion_sense_resume ] ]
|
||
|
|
- [ [ extpower_deferred, charger_task, motion_sense_switch_sensor_rate, lid_switch_open, lid_switch_close, motion_sense_task ], hook_notify, [ powerbtn_x86_lid_change, power_up_inhibited_cb, system_common_shutdown, motion_sense_shutdown, motion_sense_resume ] ]
|
||
|
|
- [ common_intel_x86_power_handle_state, hook_notify, power_up_inhibited_cb ]
|
||
|
|
# pd_request_power_swap calls set_state with either PD_STATE_SRC_SWAP_INIT or
|
||
|
|
# PD_STATE_SNK_SWAP_INIT as parameters, which cannot call any of the
|
||
|
|
# charge_manager functions.
|
||
|
|
- [ [ pd_request_power_swap, pd_execute_hard_reset, pd_request_data_swap, pd_request_vconn_swap.lto_priv.237, pd_send_request_msg.lto_priv.250 ], set_state.lto_priv.236, [ typec_set_input_current_limit, charge_manager_update_charge, pd_power_supply_reset, pd_dfp_exit_mode, usb_mux_set ] ]
|
||
|
|
# Debug prints that do not actually need a 64 uint division, of the time
|
||
|
|
- [ [i2c_reset, i2c_abort_data, i2c_xfer], cprintf, vfnprintf, [uint64divmod.part.3.lto_priv.141, get_time] ]
|