coreboot-libre-fam15h-rdimm/3rdparty/chromeec/chip/stm32/usart-stm32f0.c

/* Copyright 2014 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */
#include "usart-stm32f0.h"

#include "clock.h"
#include "common.h"
#include "compile_time_macros.h"
#include "hooks.h"
#include "registers.h"
#include "task.h"
#include "util.h"

/*
 * This configs array stores the currently active usart_config structure for
 * each USART, an entry will be NULL if no USART driver is initialized for the
 * corresponding hardware instance.
 */
#define STM32_USARTS_MAX 4

static struct usart_config const *configs[STM32_USARTS_MAX];

struct usart_configs usart_get_configs(void)
{
	return (struct usart_configs) {configs, ARRAY_SIZE(configs)};
}

static void usart_variant_enable(struct usart_config const *config)
{
	/*
	 * Make sure we register this config before enabling the HW.
	 * If we did it the other way around the FREQ_CHANGE hook could be
	 * called before we update the configs array and we would miss the
	 * clock frequency change event, leaving our baud rate divisor wrong.
	 */
	configs[config->hw->index] = config;

	usart_set_baud(config, config->baud);

	task_enable_irq(config->hw->irq);
}

void usart_set_baud(struct usart_config const *config, int baud)
{
	usart_set_baud_f0_l(config, baud, clock_get_freq());
}

static void usart_variant_disable(struct usart_config const *config)
{
	int index = config->hw->index;

	/*
	 * Only disable the shared interrupt for USART3/4 if both USARTs are
	 * now disabled.
	 */
	if ((index == 0) ||
	    (index == 1) ||
	    (index == 2 && configs[3] == NULL) ||
	    (index == 3 && configs[2] == NULL))
		task_disable_irq(config->hw->irq);

	configs[index] = NULL;
}

static struct usart_hw_ops const usart_variant_hw_ops = {
	.enable  = usart_variant_enable,
	.disable = usart_variant_disable,
};

static void freq_change(void)
{
	size_t	i;

	for (i = 0; i < ARRAY_SIZE(configs); ++i)
		if (configs[i])
			usart_set_baud_f0_l(configs[i], configs[i]->baud,
					clock_get_freq());
}

DECLARE_HOOK(HOOK_FREQ_CHANGE, freq_change, HOOK_PRIO_DEFAULT);

void usart_clear_tc(struct usart_config const *config)
{
	STM32_USART_ICR(config->hw->base) |= STM32_USART_ICR_TCCF;
}

/*
 * USART interrupt bindings.  These functions can not be defined as static or
 * they will be removed by the linker because of the way that DECLARE_IRQ works.
 */
#if defined(CONFIG_STREAM_USART1)
struct usart_hw_config const usart1_hw = {
	.index          = 0,
	.base           = STM32_USART1_BASE,
	.irq            = STM32_IRQ_USART1,
	.clock_register = &STM32_RCC_APB2ENR,
	.clock_enable   = STM32_RCC_PB2_USART1,
	.ops            = &usart_variant_hw_ops,
};

void usart1_interrupt(void)
{
	usart_interrupt(configs[0]);
}

DECLARE_IRQ(STM32_IRQ_USART1, usart1_interrupt, 2);
#endif

#if defined(CONFIG_STREAM_USART2)
struct usart_hw_config const usart2_hw = {
	.index          = 1,
	.base           = STM32_USART2_BASE,
	.irq            = STM32_IRQ_USART2,
	.clock_register = &STM32_RCC_APB1ENR,
	.clock_enable   = STM32_RCC_PB1_USART2,
	.ops            = &usart_variant_hw_ops,
};

void usart2_interrupt(void)
{
	usart_interrupt(configs[1]);
}

DECLARE_IRQ(STM32_IRQ_USART2, usart2_interrupt, 2);
#endif

#if defined(CONFIG_STREAM_USART3)
struct usart_hw_config const usart3_hw = {
	.index          = 2,
	.base           = STM32_USART3_BASE,
	.irq            = STM32_IRQ_USART3_4,
	.clock_register = &STM32_RCC_APB1ENR,
	.clock_enable   = STM32_RCC_PB1_USART3,
	.ops            = &usart_variant_hw_ops,
};
#endif

#if defined(CONFIG_STREAM_USART4)
struct usart_hw_config const usart4_hw = {
	.index          = 3,
	.base           = STM32_USART4_BASE,
	.irq            = STM32_IRQ_USART3_4,
	.clock_register = &STM32_RCC_APB1ENR,
	.clock_enable   = STM32_RCC_PB1_USART4,
	.ops            = &usart_variant_hw_ops,
};
#endif

#if defined(CONFIG_STREAM_USART3) || defined(CONFIG_STREAM_USART4)
void usart3_4_interrupt(void)
{
	/*
	 * This interrupt handler could be called with one of these configs
	 * not initialized, so we need to check here and only call the generic
	 * USART interrupt handler for initialized configs.
	 */
	if (configs[2])
		usart_interrupt(configs[2]);

	if (configs[3])
		usart_interrupt(configs[3]);
}

DECLARE_IRQ(STM32_IRQ_USART3_4, usart3_4_interrupt, 2);
#endif