coreboot-libre-fam15h-rdimm/3rdparty/chromeec/chip/stm32/usb_hid.c

157 lines
4.3 KiB
C
Raw Normal View History

2024-03-04 11:14:53 +01:00
/* Copyright 2014 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#include "clock.h"
#include "common.h"
#include "config.h"
#include "console.h"
#include "gpio.h"
#include "hooks.h"
#include "link_defs.h"
#include "registers.h"
#include "task.h"
#include "timer.h"
#include "util.h"
#include "usb_descriptor.h"
#include "usb_hw.h"
#include "usb_hid.h"
#include "usb_hid_hw.h"
/* Console output macro */
#define CPRINTF(format, args...) cprintf(CC_USB, format, ## args)
void hid_tx(int ep)
{
/* clear IT */
STM32_USB_EP(ep) = (STM32_USB_EP(ep) & EP_MASK);
}
void hid_reset(int ep, usb_uint *hid_ep_tx_buf, int tx_len,
usb_uint *hid_ep_rx_buf, int rx_len)
{
int i;
uint16_t ep_reg;
btable_ep[ep].tx_addr = usb_sram_addr(hid_ep_tx_buf);
btable_ep[ep].tx_count = tx_len;
/* STM32 USB SRAM needs to be accessed one U16 at a time */
for (i = 0; i < DIV_ROUND_UP(tx_len, 2); i++)
hid_ep_tx_buf[i] = 0;
ep_reg = (ep << 0) /* Endpoint Address */ |
EP_TX_VALID |
(3 << 9) /* interrupt EP */ |
EP_RX_DISAB;
/* Enable RX for output reports */
if (hid_ep_rx_buf && rx_len > 0) {
btable_ep[ep].rx_addr = usb_sram_addr(hid_ep_rx_buf);
btable_ep[ep].rx_count = ((rx_len + 1) / 2) << 10;
ep_reg |= EP_RX_VALID; /* RX Valid */
}
STM32_USB_EP(ep) = ep_reg;
}
/*
* Keep track of state in case we need to be called multiple times,
* if the report length is bigger than 64 bytes.
*/
static int report_left;
static const uint8_t *report_ptr;
/*
* Send report through ep0_buf_tx.
*
* If report size is greater than USB packet size (64 bytes), rest of the
* reports will be saved in `report_ptr` and `report_left`, so we can call this
* function again to send the remain parts.
*
* @return 0 if entire report is sent, 1 if there are remaining data.
*/
static int send_report(usb_uint *ep0_buf_tx,
const uint8_t *report,
int report_size)
{
int packet_size = MIN(report_size, USB_MAX_PACKET_SIZE);
memcpy_to_usbram((void *) usb_sram_addr(ep0_buf_tx),
report, packet_size);
btable_ep[0].tx_count = packet_size;
/* report_left != 0 if report doesn't fit in 1 packet. */
report_left = report_size - packet_size;
report_ptr = report + packet_size;
STM32_TOGGLE_EP(0, EP_TX_RX_MASK, EP_TX_RX_VALID,
report_left ? 0 : EP_STATUS_OUT);
return report_left ? 1 : 0;
}
int hid_iface_request(usb_uint *ep0_buf_rx, usb_uint *ep0_buf_tx,
const struct usb_hid_config_t *config)
{
const uint8_t *report_desc = config->report_desc;
int report_size = config->report_size;
const struct usb_hid_descriptor *hid_desc = config->hid_desc;
if (!ep0_buf_rx) {
/*
* Continue previous transfer. We ignore report_desc/size here,
* which is fine as only one GET_DESCRIPTOR command comes at a
* time.
*/
if (report_left == 0)
return -1;
report_size = MIN(USB_MAX_PACKET_SIZE, report_left);
memcpy_to_usbram((void *) usb_sram_addr(ep0_buf_tx),
report_ptr, report_size);
btable_ep[0].tx_count = report_size;
report_left -= report_size;
report_ptr += report_size;
STM32_TOGGLE_EP(0, EP_TX_MASK, EP_TX_VALID,
report_left ? 0 : EP_STATUS_OUT);
return report_left ? 1 : 0;
} else if (ep0_buf_rx[0] == (USB_DIR_IN | USB_RECIP_INTERFACE |
(USB_REQ_GET_DESCRIPTOR << 8))) {
if (ep0_buf_rx[1] == (USB_HID_DT_REPORT << 8)) {
/* Setup : HID specific : Get Report descriptor */
return send_report(ep0_buf_tx, report_desc,
MIN(ep0_buf_rx[3], report_size));
} else if (ep0_buf_rx[1] == (USB_HID_DT_HID << 8)) {
/* Setup : HID specific : Get HID descriptor */
memcpy_to_usbram_ep0_patch(hid_desc, sizeof(*hid_desc));
btable_ep[0].tx_count = sizeof(*hid_desc);
STM32_TOGGLE_EP(0, EP_TX_RX_MASK, EP_TX_RX_VALID,
EP_STATUS_OUT);
return 0;
}
} else if (ep0_buf_rx[0] == (USB_DIR_IN |
USB_RECIP_INTERFACE |
USB_TYPE_CLASS |
(USB_HID_REQ_GET_REPORT << 8))) {
const uint8_t report_type = (ep0_buf_rx[1] >> 8) & 0xFF;
const uint8_t report_id = ep0_buf_rx[1] & 0xFF;
int retval;
report_left = ep0_buf_rx[3];
if (!config->get_report) /* not supported */
return -1;
retval = config->get_report(report_id,
report_type,
&report_ptr,
&report_left);
if (retval)
return retval;
return send_report(ep0_buf_tx, report_ptr, report_left);
}
return -1;
}