coreboot-libre-fam15h-rdimm/3rdparty/chromeec/power/skylake.c

194 lines
4.7 KiB
C
Raw Normal View History

2024-03-04 11:14:53 +01:00
/* Copyright 2015 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* Skylake IMVP8 / ROP PMIC chipset power control module for Chrome EC */
#include "chipset.h"
#include "console.h"
#include "gpio.h"
#include "hooks.h"
#include "intel_x86.h"
#include "lpc.h"
#include "panic.h"
#include "power_button.h"
#include "system.h"
#include "timer.h"
/* Console output macros */
#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args)
static int forcing_shutdown; /* Forced shutdown in progress? */
/* Power signals list. Must match order of enum power_signal. */
const struct power_signal_info power_signal_list[] = {
#ifdef CONFIG_POWER_S0IX
[X86_SLP_S0_DEASSERTED] = {
GPIO_PCH_SLP_S0_L,
POWER_SIGNAL_ACTIVE_HIGH | POWER_SIGNAL_DISABLE_AT_BOOT,
"SLP_S0_DEASSERTED",
},
#endif
[X86_SLP_S3_DEASSERTED] = {
SLP_S3_SIGNAL_L,
POWER_SIGNAL_ACTIVE_HIGH,
"SLP_S3_DEASSERTED",
},
[X86_SLP_S4_DEASSERTED] = {
SLP_S4_SIGNAL_L,
POWER_SIGNAL_ACTIVE_HIGH,
"SLP_S4_DEASSERTED",
},
[X86_SLP_SUS_DEASSERTED] = {
GPIO_PCH_SLP_SUS_L,
POWER_SIGNAL_ACTIVE_HIGH,
"SLP_SUS_DEASSERTED",
},
[X86_RSMRST_L_PWRGD] = {
GPIO_RSMRST_L_PGOOD,
POWER_SIGNAL_ACTIVE_HIGH,
"RSMRST_N_PWRGD",
},
[X86_PMIC_DPWROK] = {
GPIO_PMIC_DPWROK,
POWER_SIGNAL_ACTIVE_HIGH,
"PMIC_DPWROK",
},
};
BUILD_ASSERT(ARRAY_SIZE(power_signal_list) == POWER_SIGNAL_COUNT);
void chipset_force_shutdown(enum chipset_shutdown_reason reason)
{
CPRINTS("%s()", __func__);
/*
* Force off. Sending a reset command to the PMIC will power off
* the EC, so simulate a long power button press instead. This
* condition will reset once the state machine transitions to G3.
* Consider reducing the latency here by changing the power off
* hold time on the PMIC.
*/
if (!chipset_in_state(CHIPSET_STATE_ANY_OFF)) {
report_ap_reset(reason);
forcing_shutdown = 1;
power_button_pch_press();
}
}
__attribute__((weak)) void chipset_set_pmic_slp_sus_l(int level)
{
gpio_set_level(GPIO_PMIC_SLP_SUS_L, level);
}
enum power_state chipset_force_g3(void)
{
CPRINTS("Forcing fake G3.");
chipset_set_pmic_slp_sus_l(0);
return POWER_G3;
}
static void handle_slp_sus(enum power_state state)
{
/* If we're down or going down don't do anythin with SLP_SUS_L. */
if (state == POWER_G3 || state == POWER_S5G3)
return;
/* Always mimic PCH SLP_SUS request for all other states. */
chipset_set_pmic_slp_sus_l(gpio_get_level(GPIO_PCH_SLP_SUS_L));
}
void chipset_handle_espi_reset_assert(void)
{
/*
* If eSPI_Reset# pin is asserted without SLP_SUS# being asserted, then
* it means that there is an unexpected power loss (global reset
* event). In this case, check if shutdown was being forced by pressing
* power button. If yes, release power button.
*/
if ((power_get_signals() & IN_PCH_SLP_SUS_DEASSERTED) &&
forcing_shutdown) {
power_button_pch_release();
forcing_shutdown = 0;
}
}
enum power_state power_handle_state(enum power_state state)
{
enum power_state new_state;
/* Process RSMRST_L state changes. */
common_intel_x86_handle_rsmrst(state);
if (state == POWER_S5 && forcing_shutdown) {
power_button_pch_release();
forcing_shutdown = 0;
}
new_state = common_intel_x86_power_handle_state(state);
/* Process SLP_SUS_L state changes after a new state is decided. */
handle_slp_sus(new_state);
return new_state;
}
/* Workaround for flags getting lost with power cycle */
__attribute__((weak)) int board_has_working_reset_flags(void)
{
return 1;
}
#ifdef CONFIG_CHIPSET_HAS_PLATFORM_PMIC_RESET
void chipset_handle_reboot(void)
{
int flags;
if (system_jumped_to_this_image())
return;
/* Interrogate current reset flags from previous reboot. */
flags = system_get_reset_flags();
/*
* Do not make PMIC re-sequence the power rails if the following reset
* conditions are not met.
*/
if (!(flags &
(EC_RESET_FLAG_WATCHDOG | EC_RESET_FLAG_SOFT |
EC_RESET_FLAG_HARD)))
return;
/* Preserve AP off request. */
if (flags & EC_RESET_FLAG_AP_OFF) {
/* Do not issue PMIC reset if board cannot save reset flags */
if (!board_has_working_reset_flags()) {
ccprintf("Skip PMIC reset due to board issue.\n");
cflush();
return;
}
chip_save_reset_flags(EC_RESET_FLAG_AP_OFF);
}
#ifdef CONFIG_CHIP_PANIC_BACKUP
/* Ensure panic data if any is backed up. */
chip_panic_data_backup();
#endif
ccprintf("Restarting system with PMIC.\n");
/* Flush console */
cflush();
/* Bring down all rails but RTC rail (including EC power). */
gpio_set_level(GPIO_EC_PLATFORM_RST, 1);
while (1)
; /* wait here */
}
#ifndef CONFIG_VBOOT_EFS
DECLARE_HOOK(HOOK_INIT, chipset_handle_reboot, HOOK_PRIO_FIRST);
#endif
#endif /* CONFIG_CHIPSET_HAS_PLATFORM_RESET */