/* Copyright 2017 The Chromium OS Authors. All rights reserved. * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ /* Eve board configuration */ #ifndef __CROS_EC_BOARD_H #define __CROS_EC_BOARD_H /* * Allow dangerous commands. * TODO: Remove this config before production. */ #define CONFIG_SYSTEM_UNLOCKED /* EC */ #define CONFIG_ADC #define CONFIG_BACKLIGHT_LID #define CONFIG_BOARD_VERSION_CUSTOM #define CONFIG_BOARD_FORCE_RESET_PIN #define CONFIG_CASE_CLOSED_DEBUG_EXTERNAL #define CONFIG_DPTF #define CONFIG_DPTF_MOTION_LID_NO_GMR_SENSOR #define CONFIG_DPTF_MULTI_PROFILE #define CONFIG_FLASH_SIZE 0x80000 #define CONFIG_FPU #define CONFIG_I2C #define CONFIG_I2C_MASTER #define CONFIG_I2C_XFER_BOARD_CALLBACK #define CONFIG_KEYBOARD_COL2_INVERTED #define CONFIG_KEYBOARD_PROTOCOL_8042 #define CONFIG_LED_COMMON #define CONFIG_LID_SWITCH #define CONFIG_LOW_POWER_IDLE #define CONFIG_LTO #define CONFIG_CHIP_PANIC_BACKUP #define CONFIG_SOFTWARE_PANIC #define CONFIG_SPI_FLASH_REGS #define CONFIG_SPI_FLASH_W25X40 #define CONFIG_VBOOT_HASH #define CONFIG_SHA256_UNROLLED #define CONFIG_VOLUME_BUTTONS #define CONFIG_VSTORE #define CONFIG_VSTORE_SLOT_COUNT 1 #define CONFIG_WATCHDOG_HELP #define CONFIG_WIRELESS #define CONFIG_WIRELESS_SUSPEND \ (EC_WIRELESS_SWITCH_WLAN | EC_WIRELESS_SWITCH_WLAN_POWER) #define WIRELESS_GPIO_WLAN GPIO_WLAN_OFF_L #define WIRELESS_GPIO_WLAN_POWER GPIO_PP3300_DX_WLAN /* EC console commands */ #define CONFIG_CMD_ACCELS #define CONFIG_CMD_ACCEL_INFO #define CONFIG_CMD_BUTTON /* Port80 */ #undef CONFIG_PORT80_HISTORY_LEN #define CONFIG_PORT80_HISTORY_LEN 256 /* SOC */ #define CONFIG_CHIPSET_SKYLAKE #define CONFIG_CHIPSET_HAS_PLATFORM_PMIC_RESET #define CONFIG_CHIPSET_RESET_HOOK #define CONFIG_HOSTCMD_ESPI #define CONFIG_HOSTCMD_ESPI_VW_SLP_SIGNALS /* Battery */ #define CONFIG_BATTERY_CUT_OFF #define CONFIG_BATTERY_HW_PRESENT_CUSTOM #define CONFIG_BATTERY_DEVICE_CHEMISTRY "LION" #define CONFIG_BATTERY_SMART /* Charger */ #define CONFIG_CHARGE_MANAGER #define CONFIG_CHARGE_RAMP_HW /* This, or just RAMP? */ #define CONFIG_CHARGER #define CONFIG_CHARGER_ISL9238 #define CONFIG_CHARGER_DISCHARGE_ON_AC #define CONFIG_CHARGER_INPUT_CURRENT 512 #define CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON 2 #define CONFIG_CHARGER_PROFILE_OVERRIDE #define CONFIG_CHARGER_PSYS #define CONFIG_CHARGER_SENSE_RESISTOR 10 #define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 #define CONFIG_CMD_CHARGER_ADC_AMON_BMON #define CONFIG_CMD_PD_CONTROL #define CONFIG_EXTPOWER_GPIO #undef CONFIG_EXTPOWER_DEBOUNCE_MS #define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 #define CONFIG_POWER_BUTTON #define CONFIG_POWER_BUTTON_X86 #define CONFIG_POWER_COMMON #define CONFIG_POWER_SIGNAL_INTERRUPT_STORM_DETECT_THRESHOLD 30 #define CONFIG_POWER_S0IX #define CONFIG_POWER_TRACK_HOST_SLEEP_STATE /* USB-A config */ #define CONFIG_USB_PORT_POWER_SMART #define CONFIG_USB_PORT_POWER_SMART_CDP_SDP_ONLY #undef CONFIG_USB_PORT_POWER_SMART_PORT_COUNT #define CONFIG_USB_PORT_POWER_SMART_PORT_COUNT 1 #define GPIO_USB1_ILIM_SEL GPIO_USB_A_ILIM_SEL /* Sensor */ #define CONFIG_TEMP_SENSOR #define CONFIG_TEMP_SENSOR_BD99992GW #define CONFIG_THERMISTOR_NCP15WB #define CONFIG_MKBP_EVENT #define CONFIG_MKBP_USE_HOST_EVENT #define CONFIG_ACCELGYRO_BMI160 #define CONFIG_ACCELGYRO_BMI160_INT_EVENT \ TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) #define CONFIG_ACCELGYRO_BMI160_INT2_OUTPUT #define CONFIG_ACCEL_BMA255 #define CONFIG_ACCEL_INTERRUPTS #define CONFIG_LID_ANGLE #define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL #define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL #define CONFIG_LID_ANGLE_UPDATE /* Enable sensor fifo, must also define the _SIZE and _THRES */ #define CONFIG_ACCEL_FIFO /* FIFO size is in power of 2. */ #define CONFIG_ACCEL_FIFO_SIZE 512 /* Depends on how fast the AP boots and typical ODRs */ #define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) #undef CONFIG_UART_TX_BUF_SIZE #define CONFIG_UART_TX_BUF_SIZE 2048 #define CONFIG_TABLET_MODE #define CONFIG_TABLET_MODE_SWITCH /* USB */ #define CONFIG_USB_CHARGER #define CONFIG_USB_PD_ALT_MODE #define CONFIG_USB_PD_ALT_MODE_DFP #define CONFIG_USB_PD_DISCHARGE_TCPC #define CONFIG_USB_PD_DUAL_ROLE #define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE #define CONFIG_USB_PD_LOGGING #define CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT TYPEC_RP_3A0 #define CONFIG_USB_PD_PORT_COUNT 2 #define CONFIG_USB_PD_VBUS_DETECT_GPIO #define CONFIG_USB_PD_TCPC_LOW_POWER #define CONFIG_USB_PD_TCPM_MUX #define CONFIG_USB_PD_TCPM_TCPCI #define CONFIG_USB_PD_TCPM_PS8751 #define CONFIG_USB_PD_TRY_SRC #define CONFIG_USB_POWER_DELIVERY #define CONFIG_USBC_SS_MUX #define CONFIG_USBC_SS_MUX_DFP_ONLY #define CONFIG_USBC_VCONN #define CONFIG_USBC_VCONN_SWAP /* BC 1.2 charger */ #define CONFIG_BC12_DETECT_PI3USB9281 #define CONFIG_BC12_DETECT_PI3USB9281_CHIP_COUNT 2 /* Optional feature to configure npcx chip */ #define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ #define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ #define NPCX_TACH_SEL2 0 /* 0:GPIO40/73 as TACH */ /* I2C ports */ #define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 #define I2C_PORT_TCPC1 NPCX_I2C_PORT0_1 #define I2C_PORT_USB_CHARGER_1 NPCX_I2C_PORT0_1 #define I2C_PORT_USB_CHARGER_0 NPCX_I2C_PORT1 #define I2C_PORT_CHARGER NPCX_I2C_PORT1 #define I2C_PORT_BATTERY NPCX_I2C_PORT1 #define I2C_PORT_PMIC NPCX_I2C_PORT2 #define I2C_PORT_MP2949 NPCX_I2C_PORT2 #define I2C_PORT_GYRO NPCX_I2C_PORT3 #define I2C_PORT_BARO NPCX_I2C_PORT3 #define I2C_PORT_ACCEL I2C_PORT_GYRO #define I2C_PORT_THERMAL I2C_PORT_PMIC /* I2C addresses */ #define I2C_ADDR_BD99992_FLAGS 0x30 #define I2C_ADDR_MP2949_FLAGS 0x20 #ifndef __ASSEMBLER__ #include "gpio_signal.h" #include "registers.h" /* Nautilus doesn't have systherm0 and systherm3 */ enum temp_sensor_id { TEMP_SENSOR_BATTERY, /* BD99956GW TSENSE */ TEMP_SENSOR_CHARGER, /* BD99992GW SYSTHERM1 */ TEMP_SENSOR_DRAM, /* BD99992GW SYSTHERM2 */ TEMP_SENSOR_COUNT }; /* * Motion sensors: * When reading through IO memory is set up for sensors (LPC is used), * the first 2 entries must be accelerometers, then gyroscope. * For BMI160, accel, gyro and compass sensors must be next to each other. */ enum sensor_id { LID_ACCEL = 0, BASE_ACCEL, BASE_GYRO, SENSOR_COUNT, }; enum adc_channel { ADC_BASE_DET, ADC_VBUS, ADC_AMON_BMON, ADC_CH_COUNT }; /* TODO(crosbug.com/p/61098): Verify the numbers below. */ /* * delay to turn on the power supply max is ~16ms. * delay to turn off the power supply max is about ~180ms. */ #define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ #define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ /* delay to turn on/off vconn */ #define PD_VCONN_SWAP_DELAY 5000 /* us */ /* Define typical operating power and max power */ #define PD_OPERATING_POWER_MW 15000 #define PD_MAX_POWER_MW 45000 #define PD_MAX_CURRENT_MA 3000 #define PD_MAX_VOLTAGE_MV 20000 /* Board specific handlers */ int board_get_version(void); void board_reset_pd_mcu(void); void board_set_tcpc_power_mode(int port, int mode); /* Sensors without hardware FIFO are in forced mode */ #define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL) #endif /* !__ASSEMBLER__ */ #endif /* __CROS_EC_BOARD_H */