/* -*- mode:c -*- * * Copyright 2019 The Chromium OS Authors. All rights reserved. * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ /* Declare symbolic names for all the GPIOs that we care about. * Note: Those with interrupt handlers must be declared first. */ /* Wake Source interrupts */ GPIO_INT(LID_OPEN, PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, lid_interrupt) GPIO_INT(WP_L, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt) /* EC_WP_ODL */ GPIO_INT(POWER_BUTTON_L, PIN(0, 1), GPIO_INT_BOTH, power_button_interrupt) /* MECH_PWR_BTN_ODL */ GPIO_INT(ACOK_OD, PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt) /* Power sequencing interrupts */ GPIO_INT(SLP_S0_L, PIN(D, 5), GPIO_INT_BOTH, power_signal_interrupt) #ifndef CONFIG_HOSTCMD_ESPI_VW_SLP_SIGNALS GPIO_INT(SLP_S3_L, PIN(A, 5), GPIO_INT_BOTH, power_signal_interrupt) GPIO_INT(SLP_S4_L, PIN(D, 4), GPIO_INT_BOTH, power_signal_interrupt) #endif GPIO_INT(PG_EC_RSMRST_L, PIN(E, 2), GPIO_INT_BOTH, intel_x86_rsmrst_signal_interrupt) GPIO_INT(PG_EC_ALL_SYS_PWRGD, PIN(F, 4), GPIO_INT_BOTH, power_signal_interrupt) GPIO_INT(PP5000_A_PG_OD, PIN(D, 7), GPIO_INT_BOTH, power_signal_interrupt) /* Sensor Interrupts */ GPIO_INT(BASE_SIXAXIS_INT_L, PIN(5, 6), GPIO_INT_FALLING, bmi160_interrupt) GPIO_INT(TCS3400_INT_ODL, PIN(F, 1), GPIO_INT_FALLING, tcs3400_interrupt) /* USB-C interrupts */ GPIO_INT(USB_C0_PPC_INT_ODL, PIN(E, 0), GPIO_INT_FALLING, ppc_interrupt) GPIO_INT(USB_C1_PPC_INT_ODL, PIN(A, 2), GPIO_INT_FALLING, ppc_interrupt) GPIO_INT(USB_C0_TCPC_INT_ODL, PIN(6, 2), GPIO_INT_FALLING, tcpc_alert_event) GPIO_INT(USB_C1_TCPC_INT_ODL, PIN(F, 5), GPIO_INT_FALLING, tcpc_alert_event) GPIO_INT(USB_C0_BC12_INT_ODL, PIN(9, 5), GPIO_INT_FALLING, bc12_interrupt) GPIO_INT(USB_C1_BC12_INT_ODL, PIN(E, 4), GPIO_INT_FALLING, bc12_interrupt) GPIO_INT(HDMI_CONN_HPD, PIN(7, 2), GPIO_INT_BOTH, hdmi_hpd_interrupt) /* Volume button interrupts */ GPIO_INT(EC_VOLDN_BTN_ODL, PIN(9, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) GPIO_INT(EC_VOLUP_BTN_ODL, PIN(7, 5), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) GPIO(SYS_RESET_L, PIN(0, 2), GPIO_ODR_HIGH) /* SYS_RST_ODL */ GPIO(ENTERING_RW, PIN(E, 3), GPIO_OUT_LOW) /* EC_ENTERING_RW */ GPIO(PCH_WAKE_L, PIN(7, 4), GPIO_ODR_HIGH) /* EC_PCH_WAKE_ODL */ GPIO(PCH_PWRBTN_L, PIN(C, 1), GPIO_ODR_HIGH) /* EC_PCH_PWR_BTN_ODL */ /* Power Sequencing Signals */ GPIO(EN_PP5000_A_V1, PIN(A, 4), GPIO_DEFAULT) GPIO(EN_PP5000_A_V0, PIN(7, 3), GPIO_DEFAULT) GPIO(EN_A_RAILS, PIN(A, 3), GPIO_OUT_LOW) GPIO(EC_PCH_RSMRST_L, PIN(A, 6), GPIO_OUT_LOW) GPIO(EC_PROCHOT_ODL, PIN(6, 3), GPIO_ODR_HIGH) GPIO(EC_PROCHOT_IN_OD, PIN(3, 4), GPIO_INPUT) GPIO(EC_PCH_SYS_PWROK, PIN(3, 7), GPIO_OUT_LOW) GPIO(CPU_C10_GATE_L, PIN(6, 7), GPIO_INPUT) /* MKBP event synchronization */ GPIO(EC_INT_L, PIN(7, 0), GPIO_ODR_HIGH) /* USB and USBC Signals */ GPIO(USB_C_OC_ODL, PIN(B, 1), GPIO_ODR_HIGH) GPIO(USB_C0_TCPC_RST, PIN(9, 7), GPIO_OUT_LOW) GPIO(USB_C1_TCPC_RST_ODL, PIN(3, 2), GPIO_ODR_HIGH) GPIO(EN_USB_A_5V, PIN(3, 5), GPIO_OUT_LOW) GPIO(EN_USB_A_LOW_PWR_OD, PIN(9, 4), GPIO_OUT_LOW) /* Misc Signals */ GPIO(EC_BATT_PRES_ODL, PIN(E, 1), GPIO_INPUT) GPIO(LED_1_L, PIN(C, 4), GPIO_OUT_HIGH) /* Yellow (hatch) */ GPIO(LED_2_L, PIN(C, 3), GPIO_OUT_HIGH) /* White (hatch) */ GPIO(LED_3_L, PIN(C, 2), GPIO_OUT_HIGH) GPIO(LED_4_L, PIN(6, 0), GPIO_OUT_HIGH) GPIO(EC_KB_BL_EN, PIN(8, 6), GPIO_OUT_LOW) /* Keyboard backlight */ GPIO(EDP_BKLTEN_OD, PIN(D, 3), GPIO_ODR_HIGH) /* Display backlight */ GPIO(EN_PP5000_FAN, PIN(6, 1), GPIO_OUT_LOW) GPIO(EN_MST, PIN(9, 6), GPIO_OUT_LOW) /* I2C pins - Alternate function below configures I2C module on these pins */ GPIO(I2C0_SCL, PIN(B, 5), GPIO_INPUT | GPIO_SEL_1P8V) /* EC_I2C_SENSOR_1V8_SCL */ GPIO(I2C0_SDA, PIN(B, 4), GPIO_INPUT | GPIO_SEL_1P8V) /* EC_I2C_SENSOR_1V8_SDA */ GPIO(I2C1_SCL, PIN(9, 0), GPIO_INPUT) /* EC_I2C_USB_C0_PD_SCL */ GPIO(I2C1_SDA, PIN(8, 7), GPIO_INPUT) /* EC_I2C_USB_C0_PD_SDA */ GPIO(I2C2_SCL, PIN(9, 2), GPIO_INPUT) /* EC_I2C_USB_C1_PD_SCL */ GPIO(I2C2_SDA, PIN(9, 1), GPIO_INPUT) /* EC_I2C_USB_C1_PD_SDA */ GPIO(I2C3_SCL, PIN(D, 1), GPIO_INPUT) /* EC_I2C_USB_C0_TCPC_SDA */ GPIO(I2C3_SDA, PIN(D, 0), GPIO_INPUT) /* EC_I2C_USB_C0_TCPC_SCL */ GPIO(I2C5_SCL, PIN(3, 3), GPIO_INPUT) /* EC_I2C_POWER_SCL */ GPIO(I2C5_SDA, PIN(3, 6), GPIO_INPUT) /* EC_I2C_POWER_SDA */ GPIO(I2C7_SCL, PIN(B, 3), GPIO_INPUT) /* EC_I2C_EEPROM_SCL */ GPIO(I2C7_SDA, PIN(B, 2), GPIO_INPUT) /* EC_I2C_EEPROM_SDA */ /* Keyboard pins */ #define GPIO_KB_INPUT (GPIO_INPUT | GPIO_PULL_UP) GPIO(KBD_KSO2, PIN(1, 7), GPIO_OUT_LOW) /* KSO_02 inverted */ ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT) /* KSI_00-01 */ ALTERNATE(PIN_MASK(2, 0xFC), 0, MODULE_KEYBOARD_SCAN, GPIO_KB_INPUT) /* KSI_02-07 */ ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_00-01 */ ALTERNATE(PIN_MASK(1, 0x7F), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_03-09 */ ALTERNATE(PIN_MASK(0, 0xF0), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_10-13 */ ALTERNATE(PIN_MASK(8, 0x04), 0, MODULE_KEYBOARD_SCAN, GPIO_ODR_HIGH) /* KSO_14 */ /* Alternate functions GPIO definitions */ ALTERNATE(PIN_MASK(B, 0x30), 0, MODULE_I2C, (GPIO_INPUT | GPIO_SEL_1P8V)) /* I2C0 1.8V */ ALTERNATE(PIN_MASK(9, 0x07), 0, MODULE_I2C, 0) /* I2C1 SCL / I2C2 */ ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0) /* I2C1 SDA */ ALTERNATE(PIN_MASK(D, 0x03), 0, MODULE_I2C, 0) /* I2C3 */ ALTERNATE(PIN_MASK(3, 0x48), 0, MODULE_I2C, 0) /* I2C5 */ ALTERNATE(PIN_MASK(B, 0x0C), 0, MODULE_I2C, 0) /* I2C7 */ /* UART */ ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* UART from EC to Servo */ /* PWM */ ALTERNATE(PIN_MASK(8, 0x01), 0, MODULE_PWM, 0) /* PWM3 - Keyboard backlight */ ALTERNATE(PIN_MASK(B, 0x80), 0, MODULE_PWM, 0) /* PWM5 - FAN */ ALTERNATE(PIN_MASK(4, 0x01), 0, MODULE_PWM, 0) /* TA1 - Fan Tachometer */ /* ADC */ ALTERNATE(PIN_MASK(4, 0x30), 0, MODULE_ADC, 0) /* ADC0-1 */ /* Power Switch Logic (PSL) inputs */ ALTERNATE(PIN_MASK(D, 0x04), 0, MODULE_PMU, 0) /* GPIOD2 = LID_OPEN */ ALTERNATE(PIN_MASK(0, 0x07), 0, MODULE_PMU, 0) /* GPIO00 = ACOK_OD, GPIO01 = MECH_PWR_BTN_ODL GPIO02 = EC_RST_ODL */