267 lines
7.1 KiB
C
267 lines
7.1 KiB
C
/* Copyright 2017 The Chromium OS Authors. All rights reserved.
|
|
* Use of this source code is governed by a BSD-style license that can be
|
|
* found in the LICENSE file.
|
|
*/
|
|
|
|
/* Eve board configuration */
|
|
|
|
#ifndef __CROS_EC_BOARD_H
|
|
#define __CROS_EC_BOARD_H
|
|
|
|
/*
|
|
* Allow dangerous commands.
|
|
* TODO: Remove this config before production.
|
|
*/
|
|
#undef CONFIG_SYSTEM_UNLOCKED
|
|
#define CONFIG_USB_PD_COMM_LOCKED
|
|
|
|
/* EC */
|
|
#define CONFIG_ADC
|
|
#define CONFIG_BOARD_VERSION_CBI
|
|
#define CONFIG_BOARD_HAS_RTC_RESET
|
|
#define CONFIG_CRC8
|
|
#define CONFIG_CEC
|
|
#define CONFIG_CROS_BOARD_INFO
|
|
#define CONFIG_DEDICATED_RECOVERY_BUTTON
|
|
#define CONFIG_EMULATED_SYSRQ
|
|
#define CONFIG_LED_COMMON
|
|
#define CONFIG_KEYBOARD_PROTOCOL_MKBP
|
|
#define CONFIG_MKBP_USE_HOST_EVENT
|
|
#define CONFIG_DPTF
|
|
#define CONFIG_FLASH_SIZE 0x80000
|
|
#define CONFIG_FPU
|
|
#define CONFIG_I2C
|
|
#define CONFIG_I2C_MASTER
|
|
#undef CONFIG_LID_SWITCH
|
|
#define CONFIG_POWER_BUTTON_IGNORE_LID
|
|
#define CONFIG_PWM
|
|
#define CONFIG_LTO
|
|
#define CONFIG_CHIP_PANIC_BACKUP
|
|
#define CONFIG_SPI_FLASH_REGS
|
|
#define CONFIG_SPI_FLASH_W25X40
|
|
#define CONFIG_WATCHDOG_HELP
|
|
#define CONFIG_WIRELESS
|
|
#define CONFIG_WIRELESS_SUSPEND \
|
|
(EC_WIRELESS_SWITCH_WLAN | EC_WIRELESS_SWITCH_WLAN_POWER)
|
|
#define WIRELESS_GPIO_WLAN GPIO_WLAN_OFF_L
|
|
#define WIRELESS_GPIO_WLAN_POWER GPIO_PP3300_DX_WLAN
|
|
#define WIRELESS_GPIO_WWAN GPIO_PP3300_DX_LTE
|
|
#define CEC_GPIO_OUT GPIO_CEC_OUT
|
|
#define CEC_GPIO_IN GPIO_CEC_IN
|
|
#define CEC_GPIO_PULL_UP GPIO_CEC_PULL_UP
|
|
#define CONFIG_FANS 1
|
|
#undef CONFIG_FAN_INIT_SPEED
|
|
#define CONFIG_FAN_INIT_SPEED 50
|
|
#define CONFIG_FAN_RPM_CUSTOM
|
|
#define CONFIG_THROTTLE_AP
|
|
#define CONFIG_CHIPSET_CAN_THROTTLE
|
|
#define CONFIG_PWM
|
|
#define CONFIG_SUPPRESSED_HOST_COMMANDS \
|
|
EC_CMD_CONSOLE_SNAPSHOT, EC_CMD_CONSOLE_READ, EC_CMD_PD_GET_LOG_ENTRY
|
|
|
|
/* EC console commands */
|
|
#define CONFIG_CMD_BUTTON
|
|
|
|
/* SOC */
|
|
#define CONFIG_CHIPSET_SKYLAKE
|
|
#define CONFIG_CHIPSET_HAS_PLATFORM_PMIC_RESET
|
|
#define CONFIG_CHIPSET_HAS_PRE_INIT_CALLBACK
|
|
#define CONFIG_CHIPSET_RESET_HOOK
|
|
#define CONFIG_HOSTCMD_ESPI
|
|
/*
|
|
* Eve and Poppy all have wires from GPIO to PCH but
|
|
* CONFIG_HOSTCMD_ESPI_VW_SLP_SIGNALS is defined. So, those GPIOs are not used
|
|
* by EC.
|
|
*/
|
|
#define CONFIG_HOSTCMD_ESPI_VW_SLP_SIGNALS
|
|
|
|
/* Charger */
|
|
#define CONFIG_CHARGE_MANAGER
|
|
|
|
#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 50000
|
|
|
|
#define CONFIG_CMD_PD_CONTROL
|
|
#define CONFIG_EXTPOWER_GPIO
|
|
#undef CONFIG_EXTPOWER_DEBOUNCE_MS
|
|
#define CONFIG_EXTPOWER_DEBOUNCE_MS 1000
|
|
#define CONFIG_POWER_BUTTON
|
|
#define CONFIG_POWER_BUTTON_X86
|
|
#define CONFIG_POWER_BUTTON_INIT_IDLE
|
|
#define CONFIG_POWER_COMMON
|
|
#define CONFIG_POWER_SIGNAL_INTERRUPT_STORM_DETECT_THRESHOLD 30
|
|
#define CONFIG_DELAY_DSW_PWROK_TO_PWRBTN
|
|
|
|
/* Sensor */
|
|
#define CONFIG_TEMP_SENSOR
|
|
#define CONFIG_TEMP_SENSOR_TMP432
|
|
|
|
/* USB */
|
|
#undef CONFIG_USB_CHARGER /* dnojiri: verify */
|
|
#define CONFIG_USB_PD_ALT_MODE
|
|
#define CONFIG_USB_PD_ALT_MODE_DFP
|
|
#define CONFIG_USB_PD_DISCHARGE_TCPC
|
|
#define CONFIG_USB_PD_DUAL_ROLE
|
|
#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE
|
|
#define CONFIG_USB_PD_LOGGING
|
|
#define CONFIG_USB_PD_PORT_COUNT 1
|
|
#define CONFIG_USB_PD_VBUS_DETECT_GPIO
|
|
#define CONFIG_USB_PD_TCPC_LOW_POWER
|
|
#define CONFIG_USB_PD_TCPM_MUX
|
|
#define CONFIG_USB_PD_TCPM_TCPCI
|
|
#define CONFIG_USB_PD_TCPM_PS8751
|
|
#define CONFIG_USB_PD_TRY_SRC
|
|
#define CONFIG_USB_POWER_DELIVERY
|
|
#define CONFIG_USBC_SS_MUX
|
|
#define CONFIG_USBC_SS_MUX_DFP_ONLY
|
|
#define CONFIG_USBC_VCONN
|
|
#define CONFIG_USBC_VCONN_SWAP
|
|
|
|
/* Charge ports */
|
|
#undef CONFIG_DEDICATED_CHARGE_PORT_COUNT
|
|
#define CONFIG_DEDICATED_CHARGE_PORT_COUNT 1
|
|
#define DEDICATED_CHARGE_PORT 1
|
|
|
|
/* USB-A config */
|
|
#define CONFIG_USB_PORT_POWER_DUMB
|
|
#define USB_PORT_COUNT 5
|
|
|
|
/* Optional feature to configure npcx chip */
|
|
#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */
|
|
#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */
|
|
#define NPCX_TACH_SEL2 1 /* 0:GPIO40/73 1:GPIO93/A6 as TACH */
|
|
|
|
/* I2C ports */
|
|
#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0
|
|
#define I2C_PORT_EEPROM NPCX_I2C_PORT0_1
|
|
#define I2C_PORT_BATTERY NPCX_I2C_PORT1
|
|
#define I2C_PORT_CHARGER NPCX_I2C_PORT1
|
|
#define I2C_PORT_PMIC NPCX_I2C_PORT2
|
|
#define I2C_PORT_THERMAL NPCX_I2C_PORT3
|
|
|
|
/* I2C addresses */
|
|
#define I2C_ADDR_TCPC0_FLAGS 0x0b
|
|
#define I2C_ADDR_EEPROM_FLAGS 0x50
|
|
|
|
/* Verify and jump to RW image on boot */
|
|
#define CONFIG_VBOOT_EFS
|
|
#define CONFIG_VBOOT_HASH
|
|
#define CONFIG_VSTORE
|
|
#define CONFIG_VSTORE_SLOT_COUNT 1
|
|
|
|
/*
|
|
* Flash layout. Since config_flash_layout.h is included before board.h,
|
|
* we can only overwrite (=undef/define) these parameters here.
|
|
*
|
|
* Flash stores 3 images: RO, RW_A, RW_B. We divide the flash by 4.
|
|
* A public key is stored at the end of RO. Signatures are stored at the
|
|
* end of RW_A and RW_B, respectively.
|
|
*/
|
|
#define CONFIG_RW_B
|
|
#define CONFIG_RW_B_MEM_OFF CONFIG_RO_MEM_OFF
|
|
#undef CONFIG_RO_SIZE
|
|
#define CONFIG_RO_SIZE (CONFIG_FLASH_SIZE / 4)
|
|
#undef CONFIG_RW_SIZE
|
|
#define CONFIG_RW_SIZE CONFIG_RO_SIZE
|
|
#define CONFIG_RW_A_STORAGE_OFF CONFIG_RW_STORAGE_OFF
|
|
#define CONFIG_RW_B_STORAGE_OFF (CONFIG_RW_A_STORAGE_OFF + \
|
|
CONFIG_RW_SIZE)
|
|
#define CONFIG_RW_A_SIGN_STORAGE_OFF (CONFIG_RW_A_STORAGE_OFF + \
|
|
CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE)
|
|
#define CONFIG_RW_B_SIGN_STORAGE_OFF (CONFIG_RW_B_STORAGE_OFF + \
|
|
CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE)
|
|
|
|
#define CONFIG_RWSIG
|
|
#define CONFIG_RWSIG_TYPE_RWSIG
|
|
#define CONFIG_RSA
|
|
#ifdef SECTION_IS_RO
|
|
#define CONFIG_RSA_OPTIMIZED
|
|
#endif
|
|
#define CONFIG_SHA256
|
|
#ifdef SECTION_IS_RO
|
|
#define CONFIG_SHA256_UNROLLED
|
|
#endif
|
|
#define CONFIG_RSA_KEY_SIZE 3072
|
|
#define CONFIG_RSA_EXPONENT_3
|
|
|
|
#ifndef __ASSEMBLER__
|
|
|
|
#include "gpio_signal.h"
|
|
#include "registers.h"
|
|
|
|
enum charge_port {
|
|
CHARGE_PORT_TYPEC0,
|
|
CHARGE_PORT_BARRELJACK,
|
|
};
|
|
|
|
enum temp_sensor_id {
|
|
TEMP_SENSOR_CHARGER, /* BD99992GW SYSTHERM1 */
|
|
TEMP_SENSOR_DRAM, /* BD99992GW SYSTHERM2 */
|
|
TEMP_SENSOR_COUNT
|
|
};
|
|
|
|
enum adc_channel {
|
|
ADC_VBUS,
|
|
ADC_CH_COUNT
|
|
};
|
|
|
|
enum pwm_channel {
|
|
PWM_CH_LED_RED,
|
|
PWM_CH_LED_GREEN,
|
|
PWM_CH_FAN,
|
|
/* Number of PWM channels */
|
|
PWM_CH_COUNT
|
|
};
|
|
|
|
enum fan_channel {
|
|
FAN_CH_0,
|
|
/* Number of FAN channels */
|
|
FAN_CH_COUNT
|
|
};
|
|
|
|
enum mft_channel {
|
|
MFT_CH_0,
|
|
/* Number of MFT channels */
|
|
MFT_CH_COUNT
|
|
};
|
|
|
|
enum OEM_ID {
|
|
OEM_KENCH = 0,
|
|
OEM_TEEMO = 1,
|
|
OEM_SION = 2,
|
|
OEM_WUKONG_N = 3,
|
|
OEM_WUKONG_A = 4,
|
|
OEM_WUKONG_M = 5,
|
|
OEM_BLEEMO = 6,
|
|
OEM_JAX = 8,
|
|
/* Number of OEM IDs */
|
|
OEM_COUNT
|
|
};
|
|
|
|
/* TODO(crosbug.com/p/61098): Verify the numbers below. */
|
|
/*
|
|
* delay to turn on the power supply max is ~16ms.
|
|
* delay to turn off the power supply max is about ~180ms.
|
|
*/
|
|
#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */
|
|
#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */
|
|
|
|
/* delay to turn on/off vconn */
|
|
#define PD_VCONN_SWAP_DELAY 5000 /* us */
|
|
|
|
/* Define typical operating power. Since Fizz doesn't have a battery to charge,
|
|
* we're not interested in any power lower than the AP power-on threshold. */
|
|
#define PD_OPERATING_POWER_MW CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON
|
|
#define PD_MAX_POWER_MW 100000
|
|
#define PD_MAX_CURRENT_MA 5000
|
|
#define PD_MAX_VOLTAGE_MV 20000
|
|
|
|
/* Board specific handlers */
|
|
void board_reset_pd_mcu(void);
|
|
void board_set_tcpc_power_mode(int port, int mode);
|
|
void led_alert(int enable);
|
|
void led_critical(void);
|
|
|
|
#endif /* !__ASSEMBLER__ */
|
|
|
|
#endif /* __CROS_EC_BOARD_H */
|