95 lines
3.0 KiB
C
95 lines
3.0 KiB
C
/* Copyright 2019 The Chromium OS Authors. All rights reserved.
|
|
* Use of this source code is governed by a BSD-style license that can be
|
|
* found in the LICENSE file.
|
|
*
|
|
* Battery pack vendor provided charging profile
|
|
*/
|
|
|
|
#include "battery_fuel_gauge.h"
|
|
#include "common.h"
|
|
#include "util.h"
|
|
|
|
/*
|
|
* Battery info for all Hatch battery types. Note that the fields
|
|
* start_charging_min/max and charging_min/max are not used for the charger.
|
|
* The effective temperature limits are given by discharging_min/max_c.
|
|
*
|
|
* Fuel Gauge (FG) parameters which are used for determining if the battery
|
|
* is connected, the appropriate ship mode (battery cutoff) command, and the
|
|
* charge/discharge FETs status.
|
|
*
|
|
* Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
|
|
* register. For some batteries, the charge/discharge FET bits are set when
|
|
* charging/discharging is active, in other types, these bits set mean that
|
|
* charging/discharging is disabled. Therefore, in addition to the mask for
|
|
* these bits, a disconnect value must be specified. Note that for TI fuel
|
|
* gauge, the charge/discharge FET status is found in Operation Status (0x54),
|
|
* but a read of Manufacturer Access (0x00) will return the lower 16 bits of
|
|
* Operation status which contains the FET status bits.
|
|
*
|
|
* The assumption for battery types supported is that the charge/discharge FET
|
|
* status can be read with a sb_read() command and therefore, only the register
|
|
* address, mask, and disconnect value need to be provided.
|
|
*/
|
|
const struct board_batt_params board_battery_info[] = {
|
|
/* LGC AP18C8K Battery Information */
|
|
[BATTERY_LGC_AP18C8K] = {
|
|
.fuel_gauge = {
|
|
.manuf_name = "LGC KT0030G020",
|
|
.ship_mode = {
|
|
.reg_addr = 0x3A,
|
|
.reg_data = { 0xC574, 0xC574 },
|
|
},
|
|
.fet = {
|
|
.reg_addr = 0x43,
|
|
.reg_mask = 0x0001,
|
|
.disconnect_val = 0x0,
|
|
},
|
|
},
|
|
.batt_info = {
|
|
.voltage_max = 13050,
|
|
.voltage_normal = 11250,
|
|
.voltage_min = 9000,
|
|
.precharge_current = 256,
|
|
.start_charging_min_c = 0,
|
|
.start_charging_max_c = 50,
|
|
.charging_min_c = 0,
|
|
.charging_max_c = 60,
|
|
.discharging_min_c = -20,
|
|
.discharging_max_c = 75,
|
|
},
|
|
},
|
|
|
|
/* Murata AP18C4K Battery Information */
|
|
[BATTERY_MURATA_AP18C4K] = {
|
|
.fuel_gauge = {
|
|
.manuf_name = "Murata KT00304012",
|
|
.device_name = "AP18C4K",
|
|
.ship_mode = {
|
|
.reg_addr = 0x3A,
|
|
.reg_data = { 0xC574, 0xC574 },
|
|
},
|
|
.fet = {
|
|
.reg_addr = 0x0,
|
|
.reg_mask = 0x2000,
|
|
.disconnect_val = 0x2000,
|
|
},
|
|
},
|
|
.batt_info = {
|
|
.voltage_max = 13200,
|
|
.voltage_normal = 11400,
|
|
.voltage_min = 9000,
|
|
.precharge_current = 256,
|
|
.start_charging_min_c = 0,
|
|
.start_charging_max_c = 50,
|
|
.charging_min_c = 0,
|
|
.charging_max_c = 60,
|
|
.discharging_min_c = -20,
|
|
.discharging_max_c = 75,
|
|
},
|
|
},
|
|
};
|
|
BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
|
|
|
|
const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_LGC_AP18C8K;
|