302 lines
8.0 KiB
C
302 lines
8.0 KiB
C
/* Copyright 2012 The Chromium OS Authors. All rights reserved.
|
|
* Use of this source code is governed by a BSD-style license that can be
|
|
* found in the LICENSE file.
|
|
*
|
|
* Battery pack vendor provided charging profile
|
|
*/
|
|
|
|
#include "battery_smart.h"
|
|
#include "charge_state.h"
|
|
#include "console.h"
|
|
#include "ec_commands.h"
|
|
#include "extpower.h"
|
|
#include "i2c.h"
|
|
#include "util.h"
|
|
|
|
static const struct battery_info info = {
|
|
/*
|
|
* Design voltage
|
|
* max = 8.4V
|
|
* normal = 7.4V
|
|
* min = 6.0V
|
|
*/
|
|
.voltage_max = 8700,
|
|
.voltage_normal = 7400,
|
|
.voltage_min = 6000,
|
|
|
|
/* Pre-charge current: I <= 0.01C */
|
|
.precharge_current = 64, /* mA */
|
|
|
|
/*
|
|
* Operational temperature range
|
|
* 0 <= T_charge <= 50 deg C
|
|
* -20 <= T_discharge <= 60 deg C
|
|
*/
|
|
.start_charging_min_c = 0,
|
|
.start_charging_max_c = 50,
|
|
.charging_min_c = 0,
|
|
.charging_max_c = 50,
|
|
.discharging_min_c = -20,
|
|
.discharging_max_c = 60,
|
|
};
|
|
|
|
const struct battery_info *battery_get_info(void)
|
|
{
|
|
return &info;
|
|
}
|
|
|
|
#ifdef CONFIG_CHARGER_PROFILE_OVERRIDE
|
|
|
|
static int fast_charging_allowed = 1;
|
|
|
|
/*
|
|
* This can override the smart battery's charging profile. To make a change,
|
|
* modify one or more of requested_voltage, requested_current, or state.
|
|
* Leave everything else unchanged.
|
|
*
|
|
* Return the next poll period in usec, or zero to use the default (which is
|
|
* state dependent).
|
|
*/
|
|
int charger_profile_override(struct charge_state_data *curr)
|
|
{
|
|
/* temp in 0.1 deg C */
|
|
int temp_c;
|
|
const struct charger_info *info;
|
|
|
|
/* keep track of last temperature range for hysteresis */
|
|
static enum {
|
|
TEMP_LOW,
|
|
TEMP_NORMAL,
|
|
TEMP_HIGH
|
|
} temp_range = TEMP_NORMAL, prev_temp_range = TEMP_NORMAL;
|
|
|
|
/* charging voltage to use at high temp */
|
|
static int high_temp_charging_voltage;
|
|
|
|
/* custom profile phase at normal temp */
|
|
static int normal_temp_phase;
|
|
|
|
/* battery voltage and current and previous voltage and current */
|
|
int batt_voltage, batt_current;
|
|
static int prev_batt_voltage, prev_batt_current;
|
|
|
|
/*
|
|
* Determine temperature range:
|
|
* Low: Battery is <15C
|
|
* Normal: Battery is 15-45C
|
|
* High: Battery is >45C
|
|
*
|
|
* Add 0.2 degrees of hysteresis.
|
|
* If temp reading was bad use last range.
|
|
*/
|
|
if (!(curr->batt.flags & BATT_FLAG_BAD_TEMPERATURE)) {
|
|
temp_c = curr->batt.temperature - 2731;
|
|
if (temp_c < 149)
|
|
temp_range = TEMP_LOW;
|
|
else if (temp_c > 151 && temp_c < 449)
|
|
temp_range = TEMP_NORMAL;
|
|
else if (temp_c > 451)
|
|
temp_range = TEMP_HIGH;
|
|
}
|
|
|
|
/*
|
|
* Treat voltage and current as a pair, if either is bad fall back to
|
|
* previous reading.
|
|
*/
|
|
if (curr->batt.flags &
|
|
(BATT_FLAG_BAD_VOLTAGE | BATT_FLAG_BAD_CURRENT)) {
|
|
batt_voltage = prev_batt_voltage;
|
|
batt_current = prev_batt_current;
|
|
} else {
|
|
batt_voltage = prev_batt_voltage = curr->batt.voltage;
|
|
batt_current = prev_batt_current = curr->batt.current;
|
|
}
|
|
|
|
/*
|
|
* If we are not charging or we aren't using fast charging profiles,
|
|
* then do not override desired current and voltage and reset some
|
|
* fast charging profile static variables.
|
|
*/
|
|
if (curr->state != ST_CHARGE || !fast_charging_allowed) {
|
|
prev_temp_range = TEMP_NORMAL;
|
|
normal_temp_phase = 0;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Okay, impose our custom will:
|
|
* Normal temp:
|
|
* Phase 0: CC at 9515mA @ 8.3V
|
|
* CV at 8.3V until current drops to 4759mA
|
|
* Phase 1: CC at 4759mA @ 8.7V
|
|
* CV at 8.7V
|
|
*
|
|
* Low temp:
|
|
* CC at 2854mA @ 8.7V
|
|
* CV at 8.7V
|
|
*
|
|
* High temp:
|
|
* If battery voltage < 8.3V then:
|
|
* CC at 6660mA @ 8.3V
|
|
* CV at 8.3V (when battery is hot we don't go to fully charged)
|
|
* else:
|
|
* CV at just above battery voltage which will essentially
|
|
* terminate the charge and allow battery to cool.
|
|
* Note that if we ever request a voltage below the present battery
|
|
* voltage, then we will stop the BQ switching, which will power off
|
|
* the INA and we won't be able to charge again until AC is
|
|
* disconnected. see crbug.com/p/35491.
|
|
*/
|
|
switch (temp_range) {
|
|
case TEMP_LOW:
|
|
curr->requested_current = 2854;
|
|
curr->requested_voltage = 8700;
|
|
break;
|
|
case TEMP_NORMAL:
|
|
if (normal_temp_phase == 0) {
|
|
curr->requested_current = 9515;
|
|
curr->requested_voltage = 8300;
|
|
if (batt_current <= 4759 && batt_voltage >= 8200)
|
|
normal_temp_phase = 1;
|
|
}
|
|
if (normal_temp_phase == 1) {
|
|
curr->requested_current = 4759;
|
|
curr->requested_voltage = 8700;
|
|
}
|
|
break;
|
|
case TEMP_HIGH:
|
|
/*
|
|
* First time TEMP_HIGH is used, get the closest voltage
|
|
* just above the battery voltage. If it is above 8.3V, we
|
|
* will use that as the target, otherwise we will use 8.3V.
|
|
*/
|
|
if (prev_temp_range != TEMP_HIGH) {
|
|
info = charger_get_info();
|
|
high_temp_charging_voltage = MAX(8300,
|
|
charger_closest_voltage(batt_voltage +
|
|
info->voltage_step));
|
|
}
|
|
curr->requested_current = 6660;
|
|
curr->requested_voltage = high_temp_charging_voltage;
|
|
break;
|
|
}
|
|
prev_temp_range = temp_range;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Customs options controllable by host command. */
|
|
#define PARAM_FASTCHARGE (CS_PARAM_CUSTOM_PROFILE_MIN + 0)
|
|
|
|
enum ec_status charger_profile_override_get_param(uint32_t param,
|
|
uint32_t *value)
|
|
{
|
|
if (param == PARAM_FASTCHARGE) {
|
|
*value = fast_charging_allowed;
|
|
return EC_RES_SUCCESS;
|
|
}
|
|
return EC_RES_INVALID_PARAM;
|
|
}
|
|
|
|
enum ec_status charger_profile_override_set_param(uint32_t param,
|
|
uint32_t value)
|
|
{
|
|
if (param == PARAM_FASTCHARGE) {
|
|
fast_charging_allowed = value;
|
|
return EC_RES_SUCCESS;
|
|
}
|
|
return EC_RES_INVALID_PARAM;
|
|
}
|
|
|
|
#ifdef CONFIG_CMD_FASTCHARGE
|
|
static int command_fastcharge(int argc, char **argv)
|
|
{
|
|
if (argc > 1 && !parse_bool(argv[1], &fast_charging_allowed))
|
|
return EC_ERROR_PARAM1;
|
|
|
|
ccprintf("fastcharge %s\n", fast_charging_allowed ? "on" : "off");
|
|
|
|
return EC_SUCCESS;
|
|
}
|
|
DECLARE_CONSOLE_COMMAND(fastcharge, command_fastcharge,
|
|
"[on|off]",
|
|
"Get or set fast charging profile");
|
|
#endif /* CONFIG_CMD_FASTCHARGE */
|
|
|
|
#endif /* CONFIG_CHARGER_PROFILE_OVERRIDE */
|
|
|
|
#ifdef CONFIG_BATTERY_REVIVE_DISCONNECT
|
|
/*
|
|
* Check if battery is in disconnect state, a state entered by pulling
|
|
* BATT_DISCONN_N low, and clear that state if we have external power plugged
|
|
* and no battery faults are detected. Disconnect state resembles battery
|
|
* shutdown mode, but extra steps must be taken to get the battery out of this
|
|
* mode.
|
|
*/
|
|
enum battery_disconnect_state battery_get_disconnect_state(void)
|
|
{
|
|
uint8_t data[6];
|
|
int rv;
|
|
/*
|
|
* Take note if we find that the battery isn't in disconnect state,
|
|
* and always return NOT_DISCONNECTED without probing the battery.
|
|
* This assumes the battery will not go to disconnect state during
|
|
* runtime.
|
|
*/
|
|
static int not_disconnected;
|
|
|
|
if (not_disconnected)
|
|
return BATTERY_NOT_DISCONNECTED;
|
|
|
|
if (extpower_is_present()) {
|
|
/* Check if battery charging + discharging is disabled. */
|
|
rv = sb_read_mfgacc(PARAM_OPERATION_STATUS,
|
|
SB_ALT_MANUFACTURER_ACCESS, data, sizeof(data));
|
|
if (rv)
|
|
return BATTERY_DISCONNECT_ERROR;
|
|
if (~data[3] & (BATTERY_DISCHARGING_DISABLED |
|
|
BATTERY_CHARGING_DISABLED)) {
|
|
not_disconnected = 1;
|
|
return BATTERY_NOT_DISCONNECTED;
|
|
}
|
|
|
|
/*
|
|
* Battery is neither charging nor discharging. Verify that
|
|
* we didn't enter this state due to a safety fault.
|
|
*/
|
|
rv = sb_read_mfgacc(PARAM_SAFETY_STATUS,
|
|
SB_ALT_MANUFACTURER_ACCESS, data, sizeof(data));
|
|
if (rv || data[2] || data[3] || data[4] || data[5])
|
|
return BATTERY_DISCONNECT_ERROR;
|
|
else
|
|
/* No safety fault -- clear disconnect state. */
|
|
return BATTERY_DISCONNECTED;
|
|
}
|
|
not_disconnected = 1;
|
|
return BATTERY_NOT_DISCONNECTED;
|
|
}
|
|
#endif /* CONFIG_BATTERY_REVIVE_DISCONNECT */
|
|
|
|
#define PARAM_CUT_OFF_LOW 0x10
|
|
#define PARAM_CUT_OFF_HIGH 0x00
|
|
|
|
int board_cut_off_battery(void)
|
|
{
|
|
int rv;
|
|
uint8_t buf[3];
|
|
|
|
buf[0] = SB_MANUFACTURER_ACCESS & 0xff;
|
|
buf[1] = PARAM_CUT_OFF_LOW;
|
|
buf[2] = PARAM_CUT_OFF_HIGH;
|
|
|
|
i2c_lock(I2C_PORT_BATTERY, 1);
|
|
rv = i2c_xfer_unlocked(I2C_PORT_BATTERY, BATTERY_ADDR_FLAGS,
|
|
buf, 3, NULL, 0, I2C_XFER_SINGLE);
|
|
rv |= i2c_xfer_unlocked(I2C_PORT_BATTERY, BATTERY_ADDR_FLAGS,
|
|
buf, 3, NULL, 0, I2C_XFER_SINGLE);
|
|
i2c_lock(I2C_PORT_BATTERY, 0);
|
|
|
|
return rv;
|
|
}
|
|
|