74 lines
2.1 KiB
C
74 lines
2.1 KiB
C
/* Copyright 2013 The Chromium OS Authors. All rights reserved.
|
|
* Use of this source code is governed by a BSD-style license that can be
|
|
* found in the LICENSE file.
|
|
*
|
|
* Intersil ILS29035 light sensor driver
|
|
*/
|
|
|
|
#include "driver/als_isl29035.h"
|
|
#include "i2c.h"
|
|
|
|
/* I2C interface */
|
|
#define ILS29035_I2C_ADDR_FLAGS 0x44
|
|
#define ILS29035_REG_COMMAND_I 0
|
|
#define ILS29035_REG_COMMAND_II 1
|
|
#define ILS29035_REG_DATA_LSB 2
|
|
#define ILS29035_REG_DATA_MSB 3
|
|
#define ILS29035_REG_INT_LT_LSB 4
|
|
#define ILS29035_REG_INT_LT_MSB 5
|
|
#define ILS29035_REG_INT_HT_LSB 6
|
|
#define ILS29035_REG_INT_HT_MSB 7
|
|
#define ILS29035_REG_ID 15
|
|
|
|
int isl29035_init(void)
|
|
{
|
|
/*
|
|
* Tell it to read continually. This uses 70uA, as opposed to nearly
|
|
* zero, but it makes the hook/update code cleaner (we don't want to
|
|
* wait 90ms to read on demand while processing hook callbacks).
|
|
*/
|
|
return i2c_write8(I2C_PORT_ALS, ILS29035_I2C_ADDR_FLAGS,
|
|
ILS29035_REG_COMMAND_I, 0xa0);
|
|
}
|
|
|
|
int isl29035_read_lux(int *lux, int af)
|
|
{
|
|
int rv, lsb, msb, data;
|
|
|
|
/*
|
|
* NOTE: It is necessary to read the LSB first, then the MSB. If you do
|
|
* it in the opposite order, the results are not correct. This is
|
|
* apparently an undocumented "feature". It's especially noticeable in
|
|
* one-shot mode.
|
|
*/
|
|
|
|
/* Read lsb */
|
|
rv = i2c_read8(I2C_PORT_ALS, ILS29035_I2C_ADDR_FLAGS,
|
|
ILS29035_REG_DATA_LSB, &lsb);
|
|
if (rv)
|
|
return rv;
|
|
|
|
/* Read msb */
|
|
rv = i2c_read8(I2C_PORT_ALS, ILS29035_I2C_ADDR_FLAGS,
|
|
ILS29035_REG_DATA_MSB, &msb);
|
|
if (rv)
|
|
return rv;
|
|
|
|
data = (msb << 8) | lsb;
|
|
|
|
/*
|
|
* The default power-on values will give 16 bits of precision:
|
|
* 0x0000-0xffff indicates 0-1000 lux. We multiply the sensor value by
|
|
* a scaling factor to account for attentuation by glass, tinting, etc.
|
|
*
|
|
* Caution: Don't go nuts with the attentuation factor. If it's
|
|
* greater than 32, the signed int math will roll over and you'll get
|
|
* very wrong results. Of course, if you have that much attenuation and
|
|
* are still getting useful readings, you probably have your sensor
|
|
* pointed directly into the sun.
|
|
*/
|
|
*lux = data * af * 1000 / 0xffff;
|
|
|
|
return EC_SUCCESS;
|
|
}
|