coreboot-libre-fam15h-rdimm/3rdparty/chromeec/driver/charger/bq2589x.c

395 lines
8.8 KiB
C

/* Copyright 2015 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*
* TI bq25890/bq25892/bq25895 battery charger driver.
*/
#include "config.h"
#include "bq2589x.h"
#include "charger.h"
#include "common.h"
#include "console.h"
#include "hooks.h"
#include "i2c.h"
#include "printf.h"
#include "util.h"
/* Console output macros */
#define CPUTS(outstr) cputs(CC_CHARGER, outstr)
#define CPRINTF(format, args...) cprintf(CC_CHARGER, format, ## args)
/* 5V Boost settings */
#ifndef CONFIG_CHARGER_BQ2589X_BOOST
#define CONFIG_CHARGER_BQ2589X_BOOST BQ2589X_BOOST_DEFAULT
#endif
/* IR compensation settings */
#ifndef CONFIG_CHARGER_BQ2589X_IR_COMP
#define CONFIG_CHARGER_BQ2589X_IR_COMP BQ2589X_IR_COMP_DEFAULT
#endif
/* Termination current limit setting */
#ifndef CONFIG_CHARGER_TERM_CURRENT_LIMIT
#define CONFIG_CHARGER_TERM_CURRENT_LIMIT BQ2589X_TERM_CURRENT_LIMIT_DEFAULT
#endif
/* Charger information */
static const struct charger_info bq2589x_charger_info = {
.name = "bq2589x",
.voltage_max = 4608,
.voltage_min = 3840,
.voltage_step = 16,
.current_max = 5056,
.current_min = 0,
.current_step = 64,
.input_current_max = 3250,
.input_current_min = 100,
.input_current_step = 50,
};
static int bq2589x_read(int reg, int *value)
{
return i2c_read8(I2C_PORT_CHARGER, BQ2589X_ADDR, reg, value);
}
static int bq2589x_write(int reg, int value)
{
return i2c_write8(I2C_PORT_CHARGER, BQ2589X_ADDR, reg, value);
}
static int bq2589x_watchdog_reset(void)
{
int rv, val;
rv = bq2589x_read(BQ2589X_REG_CFG2, &val);
if (rv)
return rv;
val |= BQ2589X_CFG2_WD_RST;
return bq2589x_write(BQ2589X_REG_CFG2, val);
}
static int bq2589x_set_terminate_current(int current)
{
int reg_val, rv;
int val = (current - 64) / 64;
rv = bq2589x_read(BQ2589X_REG_PRE_CHG_CURR, &reg_val);
if (rv)
return rv;
reg_val = (reg_val & ~0xf) | (val & 0xf);
return bq2589x_write(BQ2589X_REG_PRE_CHG_CURR, reg_val);
}
#ifdef CONFIG_CHARGER_OTG
int charger_enable_otg_power(int enabled)
{
int val, rv;
rv = bq2589x_read(BQ2589X_REG_CFG2, &val);
if (rv)
return rv;
val = (val & ~(BQ2589X_CFG2_CHG_CONFIG | BQ2589X_CFG2_OTG_CONFIG))
| (enabled ? BQ2589X_CFG2_OTG_CONFIG : BQ2589X_CFG2_CHG_CONFIG);
return bq2589x_write(BQ2589X_REG_CFG2, val);
}
#endif
int charger_set_input_current(int input_current)
{
int value, rv;
const struct charger_info * const info = charger_get_info();
input_current -= info->input_current_min;
if (input_current < 0)
input_current = 0;
rv = bq2589x_read(BQ2589X_REG_INPUT_CURR, &value);
if (rv)
return rv;
value = value & ~(0x3f);
value |= (input_current / info->input_current_step) & 0x3f;
return bq2589x_write(BQ2589X_REG_INPUT_CURR, value);
}
int charger_get_input_current(int *input_current)
{
int rv, value;
const struct charger_info * const info = charger_get_info();
rv = bq2589x_read(BQ2589X_REG_INPUT_CURR, &value);
if (rv)
return rv;
*input_current = (value & 0x3f) * info->input_current_step
+ info->input_current_min;
return EC_SUCCESS;
}
int charger_manufacturer_id(int *id)
{
return EC_ERROR_UNIMPLEMENTED;
}
int charger_device_id(int *id)
{
int res = bq2589x_read(BQ2589X_REG_ID, id);
if (res == EC_SUCCESS)
*id &= BQ2589X_DEVICE_ID_MASK;
return res;
}
int charger_get_option(int *option)
{
/* Ignored: does not exist */
*option = 0;
return EC_SUCCESS;
}
int charger_set_option(int option)
{
/* Ignored: does not exist */
return EC_SUCCESS;
}
const struct charger_info *charger_get_info(void)
{
return &bq2589x_charger_info;
}
int charger_get_status(int *status)
{
/* TODO(crosbug.com/p/38603) implement using REG0C value */
*status = 0;
return EC_SUCCESS;
}
int charger_set_mode(int mode)
{
return EC_SUCCESS;
}
int charger_get_current(int *current)
{
int rv, val;
const struct charger_info * const info = charger_get_info();
rv = bq2589x_read(BQ2589X_REG_CHG_CURR, &val);
if (rv)
return rv;
*current = val * info->current_step + info->current_min;
return EC_SUCCESS;
}
int charger_set_current(int current)
{
const struct charger_info * const info = charger_get_info();
current = charger_closest_current(current);
return bq2589x_write(BQ2589X_REG_CHG_CURR,
current / info->current_step);
}
int charger_get_voltage(int *voltage)
{
int rv, val;
const struct charger_info * const info = charger_get_info();
rv = bq2589x_read(BQ2589X_REG_CHG_VOLT, &val);
if (rv)
return rv;
val = (val >> 2) & 0x3f;
*voltage = val * info->voltage_step + info->voltage_min;
return EC_SUCCESS;
}
int charger_set_voltage(int voltage)
{
int rv, val;
const struct charger_info * const info = charger_get_info();
voltage = charger_closest_voltage(voltage);
rv = bq2589x_read(BQ2589X_REG_CHG_VOLT, &val);
if (rv)
return rv;
val = val & 0x3;
val |= ((voltage - info->voltage_min) / info->voltage_step) << 2;
return bq2589x_write(BQ2589X_REG_CHG_VOLT, val);
}
int charger_discharge_on_ac(int enable)
{
int rv, val;
rv = bq2589x_read(BQ2589X_REG_INPUT_CURR, &val);
if (rv)
return rv;
if (enable)
val |= BQ2589X_INPUT_CURR_EN_HIZ;
else
val &= ~BQ2589X_INPUT_CURR_EN_HIZ;
return bq2589x_write(BQ2589X_REG_INPUT_CURR, val);
}
/* Charging power state initialization */
int charger_post_init(void)
{
#ifdef CONFIG_CHARGER_ILIM_PIN_DISABLED
int val, rv;
/* Ignore ILIM pin value */
rv = bq2589x_read(BQ2589X_REG_INPUT_CURR, &val);
if (rv)
return rv;
val &= ~BQ2589X_INPUT_CURR_EN_ILIM;
rv = bq2589x_write(BQ2589X_REG_INPUT_CURR, val);
if (rv)
return rv;
#endif /* CONFIG_CHARGER_ILIM_PIN_DISABLED */
/* Input current controlled by extpower module. Do nothing here. */
return EC_SUCCESS;
}
/*****************************************************************************/
/* Hardware current ramping (aka ICO: Input Current Optimizer) */
#ifdef CONFIG_CHARGE_RAMP_HW
int charger_set_hw_ramp(int enable)
{
int val, rv;
rv = i2c_read8(I2C_PORT_CHARGER, BQ2589X_ADDR, BQ2589X_REG_CFG1, &val);
if (rv)
return rv;
if (enable)
val |= BQ2589X_CFG1_ICO_EN;
else
val &= ~BQ2589X_CFG1_ICO_EN;
return i2c_write8(I2C_PORT_CHARGER, BQ2589X_ADDR, BQ2589X_REG_CFG1,
val);
}
int chg_ramp_is_stable(void)
{
int val, rv;
rv = bq2589x_read(BQ2589X_REG_ID, &val);
if (!rv && (val & BQ2589X_ID_ICO_OPTIMIZED))
return 1;
else
return 0;
}
int chg_ramp_is_detected(void)
{
return 1;
}
int chg_ramp_get_current_limit(void)
{
int input_ma, rv;
rv = bq2589x_read(BQ2589X_REG_ADC_INPUT_CURR, &input_ma);
return rv ? -1 : 100 + (input_ma & 0x3f) * 50;
}
#endif /* CONFIG_CHARGE_RAMP_HW */
/*****************************************************************************/
/* Hooks */
static void bq2589x_init(void)
{
int val;
if (charger_device_id(&val) || val != BQ2589X_DEVICE_ID) {
CPRINTF("BQ2589X incorrent ID: 0x%02x\n", val);
return;
}
/*
* Disable I2C watchdog timer.
*
* TODO(crosbug.com/p/38603): Re-enable watchdog timer and kick it
* periodically in charger task.
*/
if (bq2589x_read(BQ2589X_REG_TIMER, &val))
return;
val &= ~0x30;
if (bq2589x_write(BQ2589X_REG_TIMER, val))
return;
if (bq2589x_set_terminate_current(CONFIG_CHARGER_TERM_CURRENT_LIMIT))
return;
if (bq2589x_watchdog_reset())
return;
if (bq2589x_write(BQ2589X_REG_IR_COMP, CONFIG_CHARGER_BQ2589X_IR_COMP))
return;
if (bq2589x_write(BQ2589X_REG_BOOST_MODE, CONFIG_CHARGER_BQ2589X_BOOST))
return;
CPRINTF("BQ2589%c initialized\n",
BQ2589X_DEVICE_ID == BQ25890_DEVICE_ID ? '0' :
(BQ2589X_DEVICE_ID == BQ25895_DEVICE_ID ? '5' : '2'));
}
DECLARE_HOOK(HOOK_INIT, bq2589x_init, HOOK_PRIO_LAST);
/*****************************************************************************/
/* Console commands */
#ifdef CONFIG_CMD_CHARGER
static int command_bq2589x(int argc, char **argv)
{
int i;
int value;
int rv;
int batt_mv, sys_mv, vbus_mv, chg_ma, input_ma;
/* Trigger one ADC conversion */
bq2589x_read(BQ2589X_REG_CFG1, &value);
bq2589x_write(BQ2589X_REG_CFG1, value | BQ2589X_CFG1_CONV_START);
do {
bq2589x_read(BQ2589X_REG_CFG1, &value);
} while (value & BQ2589X_CFG1_CONV_START); /* Wait for End of Conv. */
bq2589x_read(BQ2589X_REG_ADC_BATT_VOLT, &batt_mv);
bq2589x_read(BQ2589X_REG_ADC_SYS_VOLT, &sys_mv);
bq2589x_read(BQ2589X_REG_ADC_VBUS_VOLT, &vbus_mv);
bq2589x_read(BQ2589X_REG_ADC_CHG_CURR, &chg_ma);
bq2589x_read(BQ2589X_REG_ADC_INPUT_CURR, &input_ma);
ccprintf("ADC Batt %dmV Sys %dmV VBUS %dmV Chg %dmA Input %dmA\n",
2304 + (batt_mv & 0x7f) * 20, 2304 + sys_mv * 20,
2600 + (vbus_mv & 0x7f) * 100,
chg_ma * 50, 100 + (input_ma & 0x3f) * 50);
ccprintf("REG:");
for (i = 0; i <= 0x14; ++i)
ccprintf(" %02x", i);
ccprintf("\n");
ccprintf("VAL:");
for (i = 0; i <= 0x14; ++i) {
rv = bq2589x_read(i, &value);
if (rv)
return rv;
ccprintf(" %02x", value);
}
ccprintf("\n");
return EC_SUCCESS;
}
DECLARE_CONSOLE_COMMAND(bq2589x, command_bq2589x,
NULL, NULL);
#endif