coreboot-libre-fam15h-rdimm/util/bincfg/it8718f-ec.spec

369 lines
8.5 KiB
Python

# ITE IT8718F SuperIO EC registers
{
# 00 Configuration register
"conf00_start" : 1,
"conf00_smien" : 1,
"conf00_irqen" : 1,
"conf00_irqclr" : 1,
"conf00_ro_one" : 1,
"conf00_copen" : 1,
"conf00_vbat" : 1,
"conf00_initreset" : 1,
# 01 Interrupt Status register 1
"irq1_maxfantac1" : 1,
"irq1_maxfantac2" : 1,
"irq1_maxfantac3" : 1,
"irq1_maxfantac4" : 1,
"irq1_copen" : 1,
"irq1_reserved0" : 1,
"irq1_maxfantac5" : 1,
"irq1_reserved1" : 1,
# 02 Interrupt Status register 2
"irq2_limit_vin"[8] : 1,
# 03 Interrupt Status register 3
"irq3_limit_temp1" : 1,
"irq3_limit_temp2" : 1,
"irq3_limit_temp3" : 1,
"irq3_reserved" : 5,
# 04 SMI Mask register 1
"smi1_dis_fantac1" : 1,
"smi1_dis_fantac2" : 1,
"smi1_dis_fantac3" : 1,
"smi1_dis_fantac4" : 1,
"smi1_dis_copen" : 1,
"smi1_reserved0" : 1,
"smi1_dis_fantac5" : 1,
"smi1_reserved1" : 1,
# 05 SMI Mask register 2
"smi2_dis_vin"[8] : 1,
# 06 SMI Mask register 3
"smi3_dis_temp1" : 1,
"smi3_dis_temp2" : 1,
"smi3_dis_temp3" : 1,
"smi3_reserved" : 5,
# 07 Interrupt Mask register 1
"irqmask1_fantac1" : 1,
"irqmask1_fantac2" : 1,
"irqmask1_fantac3" : 1,
"irqmask1_fantac4" : 1,
"irqmask1_copen" : 1,
"irqmask1_reserved0" : 1,
"irqmask1_fantac5" : 1,
"irqmask1_reserved1" : 1,
# 08 Interrupt Mask register 2
"irqmask2_vin"[8] : 1,
# 09 Interrupt Mask register 3
"irqmask3_temp1" : 1,
"irqmask3_temp2" : 1,
"irqmask3_temp3" : 1,
"irqmask3_reserved" : 4,
"irqmask3_extsensor" : 1,
# 0a Interface Selection register
"iface_reserved" : 4,
"iface_extsensor_select": 3,
"iface_pseudo_eoc" : 1,
# 0b Fan PWM smoothing step selection reg
"fanpwm_reserved" : 6,
"fanpwm_smoothing_step" : 2,
# 0c Fan Tachometer 16 bit enable register
"fantach16_en_tac1" : 1,
"fantach16_en_tac2" : 1,
"fantach16_en_tac3" : 1,
"fantach16_tmpin1_enh" : 1,
"fantach16_en_tac4" : 1,
"fantach16_en_tac5" : 1,
"fantach16_tmpin2_enh" : 1,
"fantach16_tmpin3_enh" : 1,
# 0d-0f Fan Tachmometer read registers
"fantach_lo_counts1" : 8,
"fantach_lo_counts2" : 8,
"fantach_lo_counts3" : 8,
# 10-12 Fan Tachometer limit registers
"fantach_lo_limit1" : 8,
"fantach_lo_limit2" : 8,
"fantach_lo_limit3" : 8,
# 13 Fan controller main control register
"fanctlmain_mode1" : 1,
"fanctlmain_mode2" : 1,
"fanctlmain_mode3" : 1,
"fanctlmain_reserved0" : 1,
"fanctlmain_en_tac1" : 1,
"fanctlmain_en_tac2" : 1,
"fanctlmain_en_tac3" : 1,
"fanctlmain_reserved1" : 1,
# 14 FAN_CTL control register
"fanctl_enable1" : 1,
"fanctl_enable2" : 1,
"fanctl_enable3" : 1,
"fanctl_minduty_sel" : 1,
# 000: 48Mhz (PWM Frequency 375Khz)
# 001: 24Mhz (PWM Frequency 187.5Khz)
# 010: 12Mhz (PWM Frequency 93.75Khz)
# 011: 8Mhz (PWM Frequency 62.5Khz)
# 100: 6Mhz (PWM Frequency 46.875Khz)
# 101: 3Mhz (PWM Frequency 23.43Khz)
# 110: 1.5Mhz (PWM Frequency 11.7Khz)
# 111: 0.75Mhz (PWM Frequency 5.86Khz)
"fanctl_pwm_base_clock" : 3,
"fanctl_allpolarity" : 1,
# 15 FAN_CTL1 PWM control register
"fanctl1_tmpin_sel" : 2,
"fanctl1_steps" : 5,
"fanctl1_pwm_mode" : 1,
# 16 FAN_CTL2 PWM control register
"fanctl2_tmpin_sel" : 2,
"fanctl2_steps" : 5,
"fanctl2_pwm_mode" : 1,
# 17 FAN_CTL3 PWM control register
"fanctl3_tmpin_sel" : 2,
"fanctl3_steps" : 5,
"fanctl3_pwm_mode" : 1,
# 18-1a Fan Tachometer extended read registers
"fantach_hi_counts1" : 8,
"fantach_hi_counts2" : 8,
"fantach_hi_counts3" : 8,
# 1b-1d Fan Tachometer extended limit registers
"fantach_hi_limit1" : 8,
"fantach_hi_limit2" : 8,
"fantach_hi_limit3" : 8,
"reserved1e" : 8,
"reserved1f" : 8,
# 20-27 Reading registers
"vin"[8] : 8,
"vbat" : 8,
"tmpin1" : 8,
"tmpin2" : 8,
"tmpin3" : 8,
"reserved2c" : 8,
"reserved2d" : 8,
"reserved2e" : 8,
"reserved2f" : 8,
"limit_hi_vin0" : 8,
"limit_lo_vin0" : 8,
"limit_hi_vin1" : 8,
"limit_lo_vin1" : 8,
"limit_hi_vin2" : 8,
"limit_lo_vin2" : 8,
"limit_hi_vin3" : 8,
"limit_lo_vin3" : 8,
"limit_hi_vin4" : 8,
"limit_lo_vin4" : 8,
"limit_hi_vin5" : 8,
"limit_lo_vin5" : 8,
"limit_hi_vin6" : 8,
"limit_lo_vin6" : 8,
"limit_hi_vin7" : 8,
"limit_lo_vin7" : 8,
"limit_hi_tmpin1" : 8,
"limit_lo_tmpin1" : 8,
"limit_hi_tmpin2" : 8,
"limit_lo_tmpin2" : 8,
"limit_hi_tmpin3" : 8,
"limit_lo_tmpin3" : 8,
"reserved46" : 8,
"reserved47" : 8,
"reserved48" : 8,
"reserved49" : 8,
"reserved4a" : 8,
"reserved4b" : 8,
"reserved4c" : 8,
"reserved4d" : 8,
"reserved4e" : 8,
"reserved4f" : 8,
# 50 ADC Voltage channel enable register
"adc_scan_enable_vin"[8]: 1,
# 51 ADC Temperature channel enable register
"therm_diode_tmpin1" : 1,
"therm_diode_tmpin2" : 1,
"therm_diode_tmpin3" : 1,
# Mututally exclusive settings
"therm_resistor_tmpin1" : 1,
"therm_resistor_tmpin2" : 1,
"therm_resistor_tmpin3" : 1,
"therm_reserved" : 2,
"therm_limit_tmpin1" : 8,
"therm_limit_tmpin2" : 8,
"therm_limit_tmpin3" : 8,
# 55 Temperature extra channel enable reg
"therm_resistor_vin4" : 1,
"therm_resistor_vin5" : 1,
"therm_resistor_vin6" : 1,
"adc_fanctl2_pwm_duty" : 1,
# 000: 48Mhz (PWM Frequency 375Khz)
# 001: 24Mhz (PWM Frequency 187.5Khz)
# 010: 12Mhz (PWM Frequency 93.75Khz)
# 011: 8Mhz (PWM Frequency 62.5Khz)
# 100: 6Mhz (PWM Frequency 46.875Khz)
# 101: 3Mhz (PWM Frequency 23.43Khz)
# 110: 1.5Mhz (PWM Frequency 11.7Khz)
# 111: 0.75Mhz (PWM Frequency 5.86Khz)
"adc_fanctl2_pwm_bclk" : 3,
"adc_tmpin3_ext_select" : 1,
"thermal_zero_diode1" : 8,
"thermal_zero_diode2" : 8,
"ite_vendor_id" : 8,
"thermal_zero_diode3" : 8,
"reserved5a" : 8,
"ite_code_id" : 8,
"beep_fantac" : 1,
"beep_vin" : 1,
"beep_tmpin" : 1,
"beep_reserved" : 1,
# ADC clock select
# 000: 500Khz (Default)
# 001: 250Khz
# 010: 125K
# 011: 62.5Khz
# 100: 31.25Khz
# 101: 24Mhz
# 110: 1Mhz
# 111: 2Mhz
"adc_clock_select" : 3,
"thermal_zero_adj_en" : 1,
"beep_fan_freq_div" : 4,
"beep_fan_tone_div" : 4,
"beep_volt_freq_div" : 4,
"beep_volt_tone_div" : 4,
"beep_temp_freq_div" : 4,
"beep_temp_tone_div" : 4,
# 60 SmartGuardian registers
"sguard1_temp_lim_off" : 8,
"sguard1_temp_lim_fan" : 8,
"reserved62" : 8,
"sguard1_pwm_start" : 7,
"sguard1_pwm_slope6" : 1,
"sguard1_pwm_slope05" : 6,
"sguard1_pwm_reserved" : 1,
"sguard1_fan_smooth_en" : 1,
"sguard1_temp_interval" : 5,
"sguard1_temp_reserved" : 2,
"sguard1_temp_pwm_lin" : 1,
"reserved66" : 8,
"reserved67" : 8,
"sguard2_temp_lim_off" : 8,
"sguard2_temp_lim_fan" : 8,
"reserved6a" : 8,
"sguard2_pwm_start" : 7,
"sguard2_pwm_slope6" : 1,
"sguard2_pwm_slope05" : 6,
"sguard2_pwm_reserved" : 1,
"sguard2_fan_smooth_en" : 1,
"sguard2_temp_interval" : 5,
"sguard2_temp_reserved" : 2,
"sguard2_temp_pwm_lin" : 1,
"reserved6e" : 8,
"reserved6f" : 8,
"sguard3_temp_lim_off" : 8,
"sguard3_temp_lim_fan" : 8,
"reserved72" : 8,
"sguard3_pwm_start" : 7,
"sguard3_pwm_slope6" : 1,
"sguard3_pwm_slope05" : 6,
"sguard3_pwm_reserved" : 1,
"sguard3_fan_smooth_en" : 1,
"sguard3_temp_interval" : 5,
"sguard3_temp_reserved" : 2,
"sguard3_temp_pwm_lin" : 1,
"reserved76" : 8,
"reserved77" : 8,
"reserved78" : 8,
"reserved79" : 8,
"reserved7a" : 8,
"reserved7b" : 8,
"reserved7c" : 8,
"reserved7d" : 8,
"reserved7e" : 8,
"reserved7f" : 8,
# 80 Fan Tachometer 4-5 read registers
"fantach_lo_counts4" : 8,
"fantach_hi_counts4" : 8,
"fantach_lo_counts5" : 8,
"fantach_hi_counts5" : 8,
"fantach_lo_limit4" : 8,
"fantach_hi_limit4" : 8,
"fantach_lo_limit5" : 8,
"fantach_hi_limit5" : 8,
# 88 External temperature sensor host status
"ext_host_busy" : 1,
"ext_host_fnsh" : 1,
"ext_host_r_fcs_error" : 1,
"ext_host_w_fcs_error" : 1,
"ext_host_peci_highz" : 1,
"ext_host_sst_slave" : 1,
"ext_host_sst_bus" : 1,
"ext_host_data_fifo_clr": 1,
"ext_host_target_addr" : 8,
"ext_host_write_length" : 8,
"ext_host_read_length" : 8,
"ext_host_cmd" : 8,
"ext_host_writedata" : 8,
"ext_hostctl_start" : 1,
"ext_hostctl_sst_amdsi" : 1,
"ext_hostctl_sst_ctl" : 1,
"ext_hostctl_resetfifo" : 1,
"ext_hostctl_fcs_abort" : 1,
"ext_hostctl_start_en" : 1,
# Auto-Start Control
# The host will start the transaction
# at a regular rate automatically.
# 00: 32 Hz
# 01: 16 Hz
# 10: 8 Hz
# 11: 4 Hz
"ext_hostctl_start_ctl" : 2,
"ext_host_readdata" : 8,
"fan1_temp_limit_start" : 8,
"fan1_slope_pwm" : 7,
"fan1_temp_input_sel0" : 1,
"fan1_ctlmode_temp_ivl" : 5,
"fan1_ctlmode_target" : 2,
"fan1_temp_input_sel1" : 1,
"reserved93" : 8,
"fan2_temp_limit_start" : 8,
"fan2_slope_pwm" : 7,
"fan2_temp_input_sel0" : 1,
"fan2_ctlmode_temp_ivl" : 5,
"fan2_ctlmode_target" : 2,
"fan2_temp_input_sel1" : 1
}