227 lines
6.0 KiB
C
227 lines
6.0 KiB
C
/* Copyright 2016 The Chromium OS Authors. All rights reserved.
|
|
* Use of this source code is governed by a BSD-style license that can be
|
|
* found in the LICENSE file.
|
|
*/
|
|
|
|
/* UART module for ISH */
|
|
|
|
#ifndef __CROS_EC_UART_DEFS_H_
|
|
#define __CROS_EC_UART_DEFS_H_
|
|
|
|
#include <stdint.h>
|
|
#include <stddef.h>
|
|
|
|
#define UART_ERROR -1
|
|
#define UART_BUSY -2
|
|
#define HSU_BASE ISH_UART_BASE
|
|
#define UART0_OFFS (0x80)
|
|
#define UART0_BASE (ISH_UART_BASE + UART0_OFFS)
|
|
#define UART0_SIZE (0x80)
|
|
|
|
#define UART1_OFFS (0x100)
|
|
#define UART1_BASE (ISH_UART_BASE + UART1_OFFS)
|
|
#define UART1_SIZE (0x80)
|
|
|
|
#define UART2_OFFS (0x180)
|
|
#define UART2_BASE (ISH_UART_BASE + UART2_OFFS)
|
|
#define UART2_SIZE (0x80)
|
|
|
|
#define UART_REG(size, name, n) \
|
|
REG##size(uart_ctx[n].base + \
|
|
UART_OFFSET_##name * uart_ctx[n].addr_interval)
|
|
|
|
/* Register accesses */
|
|
#define LSR(n) UART_REG(8, LSR, n)
|
|
#define THR(n) UART_REG(8, THR, n)
|
|
#define FOR(n) UART_REG(32, FOR, n)
|
|
#define RBR(n) UART_REG(8, RBR, n)
|
|
#define DLL(n) UART_REG(8, DLL, n)
|
|
#define DLH(n) UART_REG(8, DLH, n)
|
|
#define DLD(n) UART_REG(8, DLD, n)
|
|
#define IER(n) UART_REG(8, IER, n)
|
|
#define IIR(n) UART_REG(8, IIR, n)
|
|
#define FCR(n) UART_REG(8, FCR, n)
|
|
#define LCR(n) UART_REG(8, LCR, n)
|
|
#define MCR(n) UART_REG(8, MCR, n)
|
|
#define MSR(n) UART_REG(8, MSR, n)
|
|
#define ABR(n) UART_REG(32, ABR, n)
|
|
#define PS(n) UART_REG(32, PS, n)
|
|
#define MUL(n) UART_REG(32, MUL, n)
|
|
#define DIV(n) UART_REG(32, DIV, n)
|
|
|
|
/* RBR: Receive Buffer register (BLAB bit = 0) */
|
|
#define UART_OFFSET_RBR (0)
|
|
/* THR: Transmit Holding register (BLAB bit = 0) */
|
|
#define UART_OFFSET_THR (0)
|
|
/* IER: Interrupt Enable register (BLAB bit = 0) */
|
|
#define UART_OFFSET_IER (1)
|
|
|
|
#define FCR_FIFO_SIZE_16 (0x00)
|
|
#define FCR_FIFO_SIZE_64 (0x20)
|
|
#define FCR_ITL_FIFO_64_BYTES_1 (0x00)
|
|
|
|
/* FCR: FIFO Control register */
|
|
#define UART_OFFSET_FCR (2)
|
|
#define FCR_FIFO_ENABLE BIT(0)
|
|
#define FCR_RESET_RX BIT(1)
|
|
#define FCR_RESET_TX BIT(2)
|
|
|
|
/* LCR: Line Control register */
|
|
#define UART_OFFSET_LCR (3)
|
|
#define LCR_DLAB (0x80)
|
|
#define LCR_5BIT_CHR (0x00)
|
|
#define LCR_6BIT_CHR (0x01)
|
|
#define LCR_7BIT_CHR (0x02)
|
|
#define LCR_8BIT_CHR (0x03)
|
|
#define LCR_BIT_CHR_MASK (0x03)
|
|
#define LCR_SB (0x40) /* Set Break */
|
|
|
|
/* MCR: Modem Control register */
|
|
#define UART_OFFSET_MCR (4)
|
|
#define MCR_DTR BIT(0)
|
|
#define MCR_RTS BIT(1)
|
|
#define MCR_LOO BIT(4)
|
|
#define MCR_INTR_ENABLE BIT(3)
|
|
#define MCR_AUTO_FLOW_EN BIT(5)
|
|
|
|
/* LSR: Line Status register */
|
|
#define UART_OFFSET_LSR (5)
|
|
#define LSR_DR BIT(0) /* Data Ready */
|
|
#define LSR_OE BIT(1) /* Overrun error */
|
|
#define LSR_PE BIT(2) /* Parity error */
|
|
#define LSR_FE BIT(3) /* Framing error */
|
|
#define LSR_BI BIT(4) /* Breaking interrupt */
|
|
#define LSR_THR_EMPTY BIT(5) /* Non FIFO mode: Transmit holding
|
|
* register empty
|
|
*/
|
|
#define LSR_TDRQ BIT(5) /* FIFO mode: Transmit Data request */
|
|
#define LSR_TEMT BIT(6) /* Transmitter empty */
|
|
|
|
#define FCR_ITL_FIFO_64_BYTES_56 (BIT(6) | BIT(7))
|
|
|
|
#define IER_RECV BIT(0)
|
|
#define IER_TDRQ BIT(1)
|
|
#define IER_LINE_STAT BIT(2)
|
|
|
|
#define UART_OFFSET_IIR (2)
|
|
/* MSR: Modem Status register */
|
|
#define UART_OFFSET_MSR (6)
|
|
|
|
/* DLL: Divisor Latch Reg. low byte (BLAB bit = 1) */
|
|
#define UART_OFFSET_DLL (0)
|
|
|
|
/* DLH: Divisor Latch Reg. high byte (BLAB bit = 1) */
|
|
#define UART_OFFSET_DLH (1)
|
|
|
|
/* DLH: Divisor Latch Fractional. (BLAB bit = 1) */
|
|
#define UART_OFFSET_DLD (2)
|
|
|
|
/* FOR: Fifo O Register (ISH only) */
|
|
#define UART_OFFSET_FOR (0x20)
|
|
#define FOR_OCCUPANCY_OFFS 0
|
|
#define FOR_OCCUPANCY_MASK 0x7F
|
|
|
|
/* ABR: Auto-Baud Control Register (ISH only) */
|
|
#define UART_OFFSET_ABR (0x24)
|
|
#define ABR_UUE BIT(4)
|
|
|
|
/* Pre-Scalar Register (ISH only) */
|
|
#define UART_OFFSET_PS (0x30)
|
|
|
|
/* DDS registers (ISH only) */
|
|
#define UART_OFFSET_MUL (0x34)
|
|
#define UART_OFFSET_DIV (0x38)
|
|
|
|
/* G_IEN: Global Interrupt Enable (ISH only) */
|
|
#define HSU_REG_GIEN REG32(HSU_BASE + 0x0)
|
|
#define HSU_REG_GIST REG32(HSU_BASE + 0x4)
|
|
|
|
#define GIEN_PWR_MGMT BIT(24)
|
|
#define GIEN_DMA_EN BIT(5)
|
|
#define GIEN_UART2_EN BIT(2)
|
|
#define GIEN_UART1_EN BIT(1)
|
|
#define GIEN_UART0_EN BIT(0)
|
|
#define GIST_DMA_EN BIT(5)
|
|
#define GIST_UART2_EN BIT(2)
|
|
#define GIST_UART1_EN BIT(1)
|
|
#define GIST_UART0_EN BIT(0)
|
|
#define GIST_UARTx_EN (GIST_UART0_EN|GIST_UART1_EN|GIST_UART2_EN)
|
|
|
|
/* UART config flag, send to sc_io_control if the current UART line has HW
|
|
* flow control lines connected.
|
|
*/
|
|
#define UART_CONFIG_HW_FLOW_CONTROL BIT(0)
|
|
|
|
/* UART config flag for sc_io_control. If defined a sc_io_event_rx_msg is
|
|
* raised only when the rx buffer is completely full. Otherwise, the event
|
|
* is raised after a timeout is received on the UART line,
|
|
* and all data received until now is provided.
|
|
*/
|
|
#define UART_CONFIG_DELIVER_FULL_RX_BUF BIT(1)
|
|
|
|
/* UART config flag for sc_io_control. If defined a sc_io_event_rx_buf_depleted
|
|
* is raised when all rx buffers that were added are full. Otherwise, no
|
|
* event is raised.
|
|
*/
|
|
#define UART_CONFIG_ANNOUNCE_DEPLETED_BUF BIT(2)
|
|
|
|
#define UART_INT_DEVICES 3
|
|
#define UART_EXT_DEVICES 8
|
|
#define UART_DEVICES UART_INT_DEVICES
|
|
#define UART_ISH_ADDR_INTERVAL 1
|
|
|
|
#define B9600 0x0000d
|
|
#define B57600 0x00000018
|
|
#define B115200 0x00000011
|
|
#define B921600 0x00000012
|
|
#define B2000000 0x00000013
|
|
#define B3000000 0x00000014
|
|
#define B3250000 0x00000015
|
|
#define B3500000 0x00000016
|
|
#define B4000000 0x00000017
|
|
#define B19200 0x0000e
|
|
#define B38400 0x0000f
|
|
|
|
/* KHZ, MHZ */
|
|
#define KHZ(x) ((x) * 1000)
|
|
#define MHZ(x) (KHZ(x) * 1000)
|
|
#if defined(CHIP_FAMILY_ISH3) || defined(CHIP_FAMILY_ISH5)
|
|
#define UART_ISH_INPUT_FREQ MHZ(120)
|
|
#elif defined(CHIP_FAMILY_ISH4)
|
|
#define UART_ISH_INPUT_FREQ MHZ(100)
|
|
#endif
|
|
#define UART_DEFAULT_BAUD_RATE 115200
|
|
#define UART_STATE_CG BIT(UART_OP_CG)
|
|
|
|
enum UART_PORT {
|
|
UART_PORT_0,
|
|
UART_PORT_1,
|
|
UART_PORT_MAX
|
|
};
|
|
|
|
enum UART_OP {
|
|
UART_OP_READ,
|
|
UART_OP_WRITE,
|
|
UART_OP_CG,
|
|
UART_OP_MAX
|
|
};
|
|
|
|
enum {
|
|
BAUD_IDX,
|
|
BAUD_SPEED,
|
|
BAUD_TABLE_MAX
|
|
};
|
|
|
|
struct uart_ctx {
|
|
uint32_t id;
|
|
uint32_t base;
|
|
uint32_t addr_interval;
|
|
uint32_t uart_state;
|
|
uint32_t is_open;
|
|
uint32_t baud_rate;
|
|
uint32_t input_freq;
|
|
uint32_t client_flags;
|
|
};
|
|
|
|
#endif /* _CROS_EC_UART_DEFS_H_ */
|