coreboot-libre-fam15h-rdimm/3rdparty/chromeec/common/pwm.c

/* Copyright 2013 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

#include "common.h"
#include "console.h"
#include "gpio.h"
#include "hooks.h"
#include "host_command.h"
#include "pwm.h"
#include "util.h"

#ifdef CONFIG_PWM

/*
 * Get target channel based on type / index host command parameters.
 * Returns 0 if a valid channel is selected, -1 on error.
 */
static int get_target_channel(enum pwm_channel *channel, int type, int index)
{
	switch (type) {
	case EC_PWM_TYPE_GENERIC:
		*channel = index;
		break;
#ifdef CONFIG_PWM_KBLIGHT
	case EC_PWM_TYPE_KB_LIGHT:
		*channel = PWM_CH_KBLIGHT;
		break;
#endif
#ifdef CONFIG_PWM_DISPLIGHT
	case EC_PWM_TYPE_DISPLAY_LIGHT:
		*channel = PWM_CH_DISPLIGHT;
		break;
#endif
	default:
		return -1;
	}

	return *channel >= PWM_CH_COUNT;
}

__attribute__((weak)) void pwm_set_raw_duty(enum pwm_channel ch, uint16_t duty)
{
	int percent;

	/* Convert 16 bit duty to percent on [0, 100] */
	percent = DIV_ROUND_NEAREST((uint32_t)duty * 100, 65535);
	pwm_set_duty(ch, percent);
}

__attribute__((weak)) uint16_t pwm_get_raw_duty(enum pwm_channel ch)
{
	return (pwm_get_duty(ch) * 65535) / 100;
}

static enum ec_status
host_command_pwm_set_duty(struct host_cmd_handler_args *args)
{
	const struct ec_params_pwm_set_duty *p = args->params;
	enum pwm_channel channel;

	if (get_target_channel(&channel, p->pwm_type, p->index))
		return EC_RES_INVALID_PARAM;

	pwm_set_raw_duty(channel, p->duty);
	pwm_enable(channel, p->duty > 0);

	return EC_RES_SUCCESS;
}
DECLARE_HOST_COMMAND(EC_CMD_PWM_SET_DUTY,
		     host_command_pwm_set_duty,
		     EC_VER_MASK(0));

static enum ec_status
host_command_pwm_get_duty(struct host_cmd_handler_args *args)
{
	const struct ec_params_pwm_get_duty *p = args->params;
	struct ec_response_pwm_get_duty *r = args->response;

	enum pwm_channel channel;

	if (get_target_channel(&channel, p->pwm_type, p->index))
		return EC_RES_INVALID_PARAM;

	r->duty = pwm_get_raw_duty(channel);
	args->response_size = sizeof(*r);

	return EC_RES_SUCCESS;
}
DECLARE_HOST_COMMAND(EC_CMD_PWM_GET_DUTY,
		     host_command_pwm_get_duty,
		     EC_VER_MASK(0));

/**
 * Print status of a PWM channel.
 *
 * @param ch		Channel to print.
 */
static void print_channel(enum pwm_channel ch, int max_duty)
{
	if (pwm_get_enabled(ch))
		if (max_duty == 100)
			ccprintf("  %d: %d%%\n", ch, pwm_get_duty(ch));
		else
			ccprintf("  %d: %d\n", ch, pwm_get_raw_duty(ch));
	else
		ccprintf("  %d: disabled\n", ch);
}

static int cc_pwm_duty(int argc, char **argv)
{
	int value = 0;
	int max_duty = 100;
	int ch;
	char *e;
	char *raw;

	if (argc < 2) {
		ccprintf("PWM channels:\n");
		for (ch = 0; ch < PWM_CH_COUNT; ch++)
			print_channel(ch, max_duty);
		return EC_SUCCESS;
	}

	ch = strtoi(argv[1], &e, 0);
	if (*e || ch < 0 || ch >= PWM_CH_COUNT)
		return EC_ERROR_PARAM1;

	if (argc > 2) {
		raw = argv[2];
		if (!strcasecmp(raw, "raw")) {
			/* use raw duty */
			value = strtoi(argv[3], &e, 0);
			max_duty = EC_PWM_MAX_DUTY;
		} else {
			/* use percent duty */
			value = strtoi(argv[2], &e, 0);
			max_duty = 100;
		}

		if (*e || value > max_duty) {
			/* Bad param */
			return EC_ERROR_PARAM2;
		} else if (value < 0) {
			/* Negative = disable */
			pwm_enable(ch, 0);
		} else {
			ccprintf("Setting channel %d to %d\n", ch, value);
			pwm_enable(ch, 1);
			(max_duty == 100) ? pwm_set_duty(ch, value) :
				pwm_set_raw_duty(ch, value);
		}
	}

	print_channel(ch, max_duty);

	return EC_SUCCESS;
}
DECLARE_CONSOLE_COMMAND(pwmduty, cc_pwm_duty,
			"[channel [<percent> | -1=disable] | [raw <value>]]",
			"Get/set PWM duty cycles ");
#endif /* CONFIG_PWM */

/* Initialize all PWM pins as functional */
static void pwm_pin_init(void)
{
	gpio_config_module(MODULE_PWM, 1);
}
/* HOOK_PRIO_INIT_PWM may be used for chip PWM unit init, so use PRIO + 1 */
DECLARE_HOOK(HOOK_INIT, pwm_pin_init, HOOK_PRIO_INIT_PWM + 1);