225 lines
12 KiB
Markdown
225 lines
12 KiB
Markdown
|
% Libreboot 20150518 release
|
||
|
|
% Leah Rowe
|
||
|
|
% 18 May 2015
|
||
|
|
|
||
|
|
Installation instructions can be found at ***docs/install/***. Building
|
||
|
|
instructions (for source code) can be found at ***docs/git/\#build***.
|
||
|
|
|
||
|
|
Machines supported in this release:
|
||
|
|
-----------------------------------
|
||
|
|
|
||
|
|
- **ThinkPad X60/X60s**
|
||
|
|
- You can also remove the motherboard from an X61/X61s and replace
|
||
|
|
it with an X60/X60s motherboard. An X60 Tablet motherboard will
|
||
|
|
also fit inside an X60/X60s.
|
||
|
|
- **ThinkPad X60 Tablet** (1024x768 and 1400x1050) with digitizer
|
||
|
|
support
|
||
|
|
- See ***docs/hardware/\#supported\_x60t\_list*** for list of supported
|
||
|
|
LCD panels
|
||
|
|
- It is unknown whether an X61 Tablet can have it's mainboard
|
||
|
|
replaced with an X60 Tablet motherboard.
|
||
|
|
- **ThinkPad T60** (Intel GPU) (there are issues; see below):
|
||
|
|
- See notes below for exceptions, and
|
||
|
|
***docs/hardware/\#supported\_t60\_list*** for known working LCD
|
||
|
|
panels.
|
||
|
|
- It is unknown whether a T61 can have it's mainboard replaced
|
||
|
|
with a T60 motherboard.
|
||
|
|
- See ***docs/future/\#t60\_cpu\_microcode***.
|
||
|
|
- T60p (and T60 laptops with ATI GPU) will likely never be
|
||
|
|
supported: ***docs/hardware/\#t60\_ati\_intel***
|
||
|
|
- **ThinkPad X200**
|
||
|
|
- X200S and X200 Tablet are also supported, conditionally; see
|
||
|
|
***docs/hardware/x200.html\#x200s***
|
||
|
|
- **ME/AMT**: libreboot removes this, permanently.
|
||
|
|
***docs/hardware/gm45\_remove\_me.html***
|
||
|
|
- **ThinkPad R400**
|
||
|
|
- See ***docs/hardware/r400.html***
|
||
|
|
- **ME/AMT**: libreboot removes this, permanently.
|
||
|
|
***docs/hardware/gm45\_remove\_me.html***
|
||
|
|
- **ThinkPad T400**
|
||
|
|
- See ***docs/hardware/t400.html***
|
||
|
|
- **ME/AMT**: libreboot removes this, permanently.
|
||
|
|
***docs/hardware/gm45\_remove\_me.html***
|
||
|
|
- **ThinkPad T500**
|
||
|
|
- See ***docs/hardware/t500.html***
|
||
|
|
- **ME/AMT**: libreboot removes this, permanently.
|
||
|
|
***docs/hardware/gm45\_remove\_me.html***
|
||
|
|
- **Apple MacBook1,1** (MA255LL/A, MA254LL/A, MA472LL/A)
|
||
|
|
- See ***docs/hardware/\#macbook11***.
|
||
|
|
- **Apple MacBook2,1** (MA699LL/A, MA701LL/A, MB061LL/A, MA700LL/A,
|
||
|
|
MB063LL/A, MB062LL/A)
|
||
|
|
- See ***docs/hardware/\#macbook21***.
|
||
|
|
|
||
|
|
Changes for this release, relative to r20150208 (earliest changes last, recent changes first)
|
||
|
|
---------------------------------------------------------------------------------------------
|
||
|
|
|
||
|
|
- Add a whitelist entry to board\_enable.c in flashrom, for the
|
||
|
|
ThinkPad R400, T400 and T500
|
||
|
|
- Updated flashrom (to SVN revision 1889)
|
||
|
|
- X200 whitelist patch removed (merged upstream)
|
||
|
|
- X200 whitelist modified to include X200S and X200 Tablet
|
||
|
|
- libreboot\_util: don't include cmos layout files (not needed
|
||
|
|
anymore)
|
||
|
|
- **coreboot-libre: backport patches for X200 Tablet digitizer
|
||
|
|
support**
|
||
|
|
- build/release/archives: create SHA512 sum manifest file of the
|
||
|
|
release archives
|
||
|
|
- build/release/archives: separate crossgcc into a new archive
|
||
|
|
- disabled generation of txtmode ROM images for now (they will be back
|
||
|
|
again in the next release)
|
||
|
|
- coreboot-libre: delete unused code (reduce size of src archive)
|
||
|
|
- Flashing guides: make them more friendly to colourblind people
|
||
|
|
- docs/gnulinux/encrypted\_\*.html: Remove mention of password
|
||
|
|
length - it was arbitrary and pointless.
|
||
|
|
- docs/maintain/: Finish the guide
|
||
|
|
- scripts/download/coreboot: use diffs included in libreboot, not
|
||
|
|
external gerrit cherry-picks - review.coreboot.org (gerrit) being
|
||
|
|
down no longer kills libreboot (backup mirrors of the master
|
||
|
|
repository exist)
|
||
|
|
- docs/install/bbb\_setup.html: Add info about wp/hold and pinouts
|
||
|
|
- docs/: improve the description of libreboot
|
||
|
|
- docs/hardware/gm45\_remove\_me.html: notes about the demefactory utility
|
||
|
|
- docs/install/bbb\_setup.html: EHCI debug: recommend linux-libre
|
||
|
|
- docs/install/bbb\_setup.html: EHCI Debug logging setup guide
|
||
|
|
- docs/hardware/t500.html: Add screen compatibility report (TODO: fix
|
||
|
|
incompatible screens)
|
||
|
|
- Update coreboot(again) + merge GM45 hybrid GPU patches - means that
|
||
|
|
T400/T500 with the ATI+Intel hybrid GPU setup will work (ATI
|
||
|
|
disabled, Intel permanently enabled). power\_on\_after\_fail nvram
|
||
|
|
option added to all GM45 boards, defaulting to No, so that plugging
|
||
|
|
it AC doesn't boot up the system against the users will. Net20DC is
|
||
|
|
now the default debug dongle on all boards (compatible with BBB).
|
||
|
|
- demefactory (new utility): create GM45 factory.rom without the ME
|
||
|
|
- ich9deblob: re-factor descriptor.c functions
|
||
|
|
- docs/hardware/t500.html: add hardware logs
|
||
|
|
- docs/gnulinux/encrypted\_\*.html: No password for default entry
|
||
|
|
- docs/git/: Add more details about BUC.TS
|
||
|
|
- grub.cfg: Also scan for grub2/grub.cfg, not just grub/grub.cfg
|
||
|
|
- docs/maintain/ (new section. WIP!): Maintaining libreboot
|
||
|
|
- docs/gnulinux/grub\_boot\_installer.html: Fix hazardous instruction
|
||
|
|
- docs/tasks.html: Better categorization between intel/amd/arm
|
||
|
|
- docs/install/bbb\_setup.html: notes about SPI flashing stability
|
||
|
|
- docs/install/bbb\_setup.html: more names for the 0.1" cables
|
||
|
|
- docs/install/\*\_external.html: add disclaimer about thermal paste
|
||
|
|
- docs/install/bbb\_setup.html: Fix broken links
|
||
|
|
- docs/install/bbb\_setup.html: preliminary notes about EHCI debug
|
||
|
|
- docs/hardware/gm45\_remove\_me.html: Link to websites talking about the
|
||
|
|
ME
|
||
|
|
- docs/install/{t400,t500,r400}\_external.html: Notes about CPU
|
||
|
|
compatibility
|
||
|
|
- Delete the ich9macchange script. It's useless, and confuses people
|
||
|
|
- docs/hardware/gm45\_remove\_me.html: prioritize ich9gen executable path
|
||
|
|
- docs/hardware/gm45\_remove\_me.html: prioritize changing mac address
|
||
|
|
- docs/hardware/gm45\_remove\_me.html: less confusing notes about ich9gen
|
||
|
|
- build/dependencies/parabola: Add dependencies for x86\_64
|
||
|
|
- scripts/dependencies/paraboladependencies: build dependencies
|
||
|
|
(32-bit Parabola)
|
||
|
|
- **New board**: ThinkPad T500
|
||
|
|
- Add diffs for descriptor/gbe differences between T500 and X200
|
||
|
|
- coreboot-libre: provide better blob categorization
|
||
|
|
- docs/hardware/gm45\_remove\_me.html: add notes about flash write protect
|
||
|
|
- **New board**: ThinkPad T400
|
||
|
|
- GRUB: add partial vesamenu.c32 support (fixes tails ISOLINUX menu)
|
||
|
|
- Update GRUB (to revision fa07d919d1ff868b18d8a42276d094b63a58e299)
|
||
|
|
- Update coreboot (to revision
|
||
|
|
83b05eb0a85d7b7ac0837cece67afabbdb46ea65)
|
||
|
|
- Intel CPU microcode (most of it) no longer deleted, because it
|
||
|
|
was deleted upstream (moved to a 3rd party repository).
|
||
|
|
- MacBook2,1 cstate patch is no longer cherry picked (merged
|
||
|
|
upstream)
|
||
|
|
- Patch to disable use of timestamps in coreboot no longer
|
||
|
|
included (merged upstream)
|
||
|
|
- coreboot-libre: don't list vortex86ex kbd firmware as microcode
|
||
|
|
(list it separately)
|
||
|
|
- coreboot-libre: don't rm \*/early\_setup\_ss.h (these are not
|
||
|
|
blobs)
|
||
|
|
- coreboot-libre: add GPLv3 license to the findblobs script
|
||
|
|
- coreboot-libreboot: don't rm raminit\_tables (nahelem/sandybridge)
|
||
|
|
(they are not blobs)
|
||
|
|
- coreboot-libre: don't delete the .spd.hex files (they are not
|
||
|
|
blobs)
|
||
|
|
- build/release/archives: don't put rmodtool in libreboot\_util
|
||
|
|
- docs/install/x200\_external.html: recommend installing GNU+Linux at
|
||
|
|
the end
|
||
|
|
- docs/install/x200\_external.html: add more photos, improve
|
||
|
|
instructions
|
||
|
|
- build/clean/grub: use distclean instead of clean
|
||
|
|
- grub-assemble: Add the *bsd* and *part\_bsd* modules
|
||
|
|
- build/roms/withgrub: Only run ich9gen if gm45/gs45 images exist
|
||
|
|
- docs/git/: Add notes about building for specific boards
|
||
|
|
- build/roms/withgrub: Allow building for a custom range of boards
|
||
|
|
- grub-assemble: Disable verbose output
|
||
|
|
- Add documentation on how to unlock root encrypted fs with key in
|
||
|
|
initramfs in Parabola Linux
|
||
|
|
- docs/gnulinux/grub\_cbfs.html: Improve structure (easier to use)
|
||
|
|
- grub.cfg: Disable the beep on startup
|
||
|
|
- docs/install/bbb\_setup.html: Make the guide easier to use
|
||
|
|
- docs/gnulinux/grub\_cbfs.html: Remove redundant instructions
|
||
|
|
- docs/install/x200\_external.html: Mark pins in the images
|
||
|
|
- docs/install/bbb\_setup.html: Replace 3.3V PSU photo with ATX PSU
|
||
|
|
- docs/hardware/x200.html: Add dumps from 4-MiB X200 with Lenovo BIOS 3.22
|
||
|
|
- docs/hardware/x200.html: Add dumps from 4-MiB X200 with Lenovo BIOS 3.18
|
||
|
|
- grub.cfg: add syslinux\_configfile menuentry for ahci0
|
||
|
|
- grub.cfg: Add more paths for syslinux\_configfile
|
||
|
|
- docs/future.html: T60: Add EDID dump from LG-Philips LP150E05-A2K1
|
||
|
|
- docs/install/bbb\_setup.html: Further clarify which clip is needed
|
||
|
|
- bash scripts: Make script output more user-friendly in general
|
||
|
|
- bash scripts: Only enable verbose output if DEBUG= is used
|
||
|
|
- build: Support multiple extra options - now possible to build
|
||
|
|
multiple images for arbitrary boards (configs), but without building
|
||
|
|
the entire collection.
|
||
|
|
- Deleted the signing archive key - the finger print and ID is given
|
||
|
|
instead, so that the user can download it from a key server
|
||
|
|
- scripts/helpers/build/release: Move docs to separate archive -
|
||
|
|
reduces the size of the other archives considerably
|
||
|
|
- Move DEBLOB to resources/utilities/coreboot-libre/deblob
|
||
|
|
- scripts/helpers/build/release: Delete DEBLOB from libreboot\_src/ -
|
||
|
|
not needed in libreboot\_src (release archive) because it contains a
|
||
|
|
coreboot revision that has already been deblobbed.
|
||
|
|
- flash (script): Use *build* instead of *DEBLOB* to know if in src
|
||
|
|
- docs/install/r400\_external.html: Show images, don't link.
|
||
|
|
- docs/install/x200\_external.html: Show images, don't link.
|
||
|
|
- docs/install/bbb\_setup.html: Show images, instead of linking
|
||
|
|
- Documentation: optimize all images (reduce file sizes)
|
||
|
|
- Remove download links from the release page (and the archive page) -
|
||
|
|
release archives are hosted differently following this release,
|
||
|
|
which means that the old methods are no longer viable.
|
||
|
|
- Moved ich9macchange to resources/scripts/misc/ich9macchange
|
||
|
|
- ich9macchange: assume that the script is being run from \_util (act
|
||
|
|
only on one ROM image, defined by a user-provided path)
|
||
|
|
- Move grub-background to resources/scripts/misc/grub-background
|
||
|
|
- grub-background: assume that it is being run from libreboot\_util
|
||
|
|
- grub-background: change only one ROM image, specified by path
|
||
|
|
- build (release archives): Add the commitid file to release/
|
||
|
|
- build-release: Move the release archives to release/
|
||
|
|
- Merge all build scripts into a single generic script, with helpers
|
||
|
|
in resources/scripts/helpers/build/
|
||
|
|
- Replace *getall* with *download*, which takes as input an argument
|
||
|
|
specifying which program the user wants to download.
|
||
|
|
- Moved the get scripts to resources/scripts/helpers/download/
|
||
|
|
- build-release: Remove the powertop entries
|
||
|
|
- Documentation: general improvements to the flashing instructions
|
||
|
|
- Merged all flashing scripts into a single script
|
||
|
|
- Updated GRUB
|
||
|
|
- bucts: Make it build without git
|
||
|
|
- Moved dejavu-fonts-ttf-2.34/AUTHORS to resources/grub/font/
|
||
|
|
- Deleted GRUB Invaders from libreboot
|
||
|
|
- Deleted SeaBIOS from libreboot
|
||
|
|
- build-release: optimize use of tar (reduced file sizes)
|
||
|
|
- grub.cfg: add another SYSLINUX config location
|
||
|
|
(/syslinux/syslinux.cfg)
|
||
|
|
- build-release: remove the bin/ directory from libreboot\_util
|
||
|
|
- cleandeps: delete the bin/ directory
|
||
|
|
- buildrom-withgrub: create the bin directory if it does not exist
|
||
|
|
- coreboot-libre: don't use git for version timestamp
|
||
|
|
- i945-pwm: add clean command to Makefile
|
||
|
|
- i945-pwm: add -lz to Makefile
|
||
|
|
- docs/install/x200\_external: Mention GPIO33 non-descriptor mode
|
||
|
|
- docs/hardware/: Remove redundant links
|
||
|
|
- ich9macchange: Add R400
|
||
|
|
- build-release: Separate ROM images into individual archives
|
||
|
|
- build-release: rename libreboot\_bin to libreboot\_util
|
||
|
|
- **New board:** ThinkPad R400 support added to libreboot.
|
||
|
|
- bbb\_setup.html: tell user to use libreboot's own flashrom
|
||
|
|
|