site: docs: hardware: Use relative links for images.
This enable to later on change the subdirectory in which the website is reployed (for instance from software/gnuboot/web to software/gnuboot/web/test) without breaking images. Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
This commit is contained in:
parent
31cd08a501
commit
4e1db5522d
GPG Key ID:
5F5DFCC14177E263
|
|
@ -45,11 +45,11 @@ Remarks about vendor bios:
|
||||||
flashed there is no problem to update the firmware internally
|
flashed there is no problem to update the firmware internally
|
||||||
|
|
||||||
Here is an image of the board:\
|
Here is an image of the board:\
|
||||||
\
|
\
|
||||||
Here is an image of the D945GCLF2 board:\
|
Here is an image of the D945GCLF2 board:\
|
||||||
{width="80%" height="80%"}\
|
{width="80%" height="80%"}\
|
||||||
And SPI SOIC8 flash chip\
|
And SPI SOIC8 flash chip\
|
||||||
{width="50%" height="50%"}
|
{width="50%" height="50%"}
|
||||||
|
|
||||||
How to replace thermal paste and fan
|
How to replace thermal paste and fan
|
||||||
------------------------------------
|
------------------------------------
|
||||||
|
|
@ -57,24 +57,24 @@ How to replace thermal paste and fan
|
||||||
This board comes with very crappy disposable loud fan, that one has no
|
This board comes with very crappy disposable loud fan, that one has no
|
||||||
bearings, which can not be repaired or oiled properly, do not waste your
|
bearings, which can not be repaired or oiled properly, do not waste your
|
||||||
time trying to fix it, just buy one chinese same size fan\
|
time trying to fix it, just buy one chinese same size fan\
|
||||||
{width="50%" height="50%"}
|
{width="50%" height="50%"}
|
||||||
{width="50%" height="50%"}\
|
{width="50%" height="50%"}\
|
||||||
Make sure that new one has same wiring\
|
Make sure that new one has same wiring\
|
||||||
{width="50%" height="50%"}\
|
{width="50%" height="50%"}\
|
||||||
This is a new one, with bearing and maintenable\
|
This is a new one, with bearing and maintenable\
|
||||||
{width="50%" height="50%"}
|
{width="50%" height="50%"}
|
||||||
{width="50%" height="50%"}\
|
{width="50%" height="50%"}\
|
||||||
Now remove the both coolers rotating them a bit, slowly, then clean both
|
Now remove the both coolers rotating them a bit, slowly, then clean both
|
||||||
silicons and both coolers (removing cmos battery first is recommended)\
|
silicons and both coolers (removing cmos battery first is recommended)\
|
||||||
{width="50%" height="50%"}\
|
{width="50%" height="50%"}\
|
||||||
Put a little bit of non conductive thermal paste on both silicons (only
|
Put a little bit of non conductive thermal paste on both silicons (only
|
||||||
cpu silicon iis shown on that image)\
|
cpu silicon iis shown on that image)\
|
||||||
{width="50%" height="50%"}\
|
{width="50%" height="50%"}\
|
||||||
|
|
||||||
Before assembling new fan, some need new longer screws, make sure having
|
Before assembling new fan, some need new longer screws, make sure having
|
||||||
these (on the left is original one, too short for new fan)\
|
these (on the left is original one, too short for new fan)\
|
||||||
{width="50%" height="50%"}\
|
{width="50%" height="50%"}\
|
||||||
After that, assemble your new fan into CPU cooler\
|
After that, assemble your new fan into CPU cooler\
|
||||||
{width="50%" height="50%"}\
|
{width="50%" height="50%"}\
|
||||||
Finally assemle both coolers on both chips, do not forget put in the CPU
|
Finally assemle both coolers on both chips, do not forget put in the CPU
|
||||||
fan connector back, and you are done.
|
fan connector back, and you are done.
|
||||||
|
|
|
||||||
|
|
@ -42,7 +42,7 @@ chip and re-flash it using external hardware.
|
||||||
It has a 25XX NOR flash (SPI protocol) in a P-DIP 8 socket, which looks like
|
It has a 25XX NOR flash (SPI protocol) in a P-DIP 8 socket, which looks like
|
||||||
this:
|
this:
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
The default chip is a 2MiB one, but we recommend upgrading it to a 16MiB chip.
|
The default chip is a 2MiB one, but we recommend upgrading it to a 16MiB chip.
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -58,7 +58,7 @@ The existing MAC address may be obtained by the following methods:
|
||||||
|
|
||||||
2. Otherwise you can read the white label that is often found on the
|
2. Otherwise you can read the white label that is often found on the
|
||||||
motherboard under the memory sticks:
|
motherboard under the memory sticks:
|
||||||
|
|
||||||
|
|
||||||
3. The MAC address is usually listed on the laptop chassis as well. This one
|
3. The MAC address is usually listed on the laptop chassis as well. This one
|
||||||
will be incorrect if the motherboard was changed and the stickers were not
|
will be incorrect if the motherboard was changed and the stickers were not
|
||||||
|
|
|
||||||
|
|
@ -71,7 +71,7 @@ guides](https://www.ifixit.com/Device/MacBook_Core_2_Duo)
|
||||||
|
|
||||||
Locate the flash. It'll be a SOIC8, which looks like this:
|
Locate the flash. It'll be a SOIC8, which looks like this:
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
motherboard. [How to remove the
|
motherboard. [How to remove the
|
||||||
motherboard](https://www.ifixit.com/Guide/MacBook+Core+2+Duo+PRAM+Battery+Replacement/529).
|
motherboard](https://www.ifixit.com/Guide/MacBook+Core+2+Duo+PRAM+Battery+Replacement/529).
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue