The build system was designed to produce images with different GPU
drivers for a single computer and/or to show the image name in the
final image names, to enable users to know which GPU driver was used.
However since all boards have practically speaking the same GPU driver
('libgfxinit') this adds too much complexity for almost no benefits.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
The seabios_grubfirst images provides the same functionality than the
GRUB images, but instead of having GRUB being loaded directly by
Coreboot, Coreboot loads SeaBIOS which then loads GRUB.
These images probably exist to enable end users to try it to workaround
potential compatibility issues between the OS and GRUB with the GRUB
image as we have a BIOS implementation being loaded.
While this looks useful, it also makes things more complicated:
- It increase the number of images to choose from, and it's
complicated to explain the difference between grub and
seabios_grubfirst to end users.
For instance for the "x200_8mb", users need to choose between 2 GPU
modes (corebootfb, or txtmode) and 12 keyboard layouts. So having to
choose between 2 payloads instead of 3 with one difference that is
hard to understand makes things easier.
- It makes testing more complicated as we have one more payload to
test and we also need to make sure to always differenciate both
images in bug reports, documentation, etc.
And if issues arise from this change in the future, we could work with
upstream to fix them and/or replace the grub images with
'seabios_grubfirst' while keeping the 'grub' name to avoid
complicating things by having two main payloads with identical
features.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
neox: fixed typos in commit message
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
Without that fix we have the following build error on Trisquel when
qemu-utils is not installed:
successfully built /gnu/store/[...]-gnuboot-trisquel-preseed.img-07-2024.drv
resources/packages/roms/download: line 175: qemu-img: command not found
make: *** [Makefile:713: release] Error 127
An option would be to make sure that the host has qemu_img by adding
its corresponding packages in resources/dependencies/ and to check for
it in configure.ac, but since we already build the qemu with Guix,
it's easier to just reuse that, and this also gives us less
maintenance in the long run.
This was broken by the commit 9cc02ddde1
("packages: roms: Start adding automatic tests.").
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
The "4.7 Mcopy" section inside the mtools info manual explains that
mcopy's '-m' argument "Preserve the file modification time.".
So in the commit 9cc02ddde1 ("packages:
roms: Start adding automatic tests."), I vaguely recall having used it
to workaround some reproducibility issues.
Guix 1.4.0 uses mtools 4.0.42. So after retrieving the source with
'guix time-machine --commit=v1.4.0 -- build --system=i686-linux
--source mtools' we have that in the writeit function in mcopy.c (with
arg->preserveTime being set by -m):
/* preserve mod time? */
if (arg->preserveTime)
now = date;
else
getTimeNow(&now);
And date is set by the following in mtools 4.0.42:
if (Source->Class->get_data(Source, &date, &filesize,
&type, 0) < 0 ){
fprintf(stderr, "Can't stat source file\n");
return -1;
}
Since Guix is supposed to make images reproducible somehow, and that
mtools isn't patched by Guix to do that, and that it takes the time
from the source file, I used '-m'.
Since I was confident enough that gnuboot-trisquel-preseed.img was
reproducible, in the commit 9cc02ddde1
("packages: roms: Start adding automatic tests."), I also added the
checksum and checked it at build time to make sure the image is really
reproducible.
But when building this image again few days ago the checksum was
different. So I used the Guix diffoscope package to investigate the
issue.
Note that at the time of writing, you either need to use Guix's
diffoscope or to disable guestfs support in diffoscope for it to work,
otherwise diffoscope 277-1 (the version in the Parabola at the time of
writing) produce a python error probably because the partition table
size is 0, and it contains a FAT12 filesystem according to fdisk, but
then the FAT12 filesystem contained within also contains that
partition table. See the upstream bugreport at
https://salsa.debian.org/reproducible-builds/diffoscope/-/issues/390
for more details.
Here the preseed.img.old file corresponds to the checksum in the
commit 9cc02ddde1 ("packages: roms:
Start adding automatic tests."), and preseed.img.new to the one I got
by building again few days ago:
$ sha512sum preseed.img.old preseed.img.new
f12a4a941afc9e24288481ed1b44fbfedf52d706e9e8aa01cfb26bf5ccd54ca52afe9ef5497faf2966ba730c1200d8b8691ebb87e6a75cd8966e0edd49bcb3c0 preseed.img.old
5613d9a5cdd8847d5a688d56c77b8cf8881baa5eef7f373bb05a5ec601e383204e6a57b399d3de913c29386b18e7e3903c9511037922204744e3234cadc8671b preseed.img.new
And by using diffoscope we have:
$ diffoscope preseed.img.old preseed.img.new
--- preseed.img.old
+++ preseed.img.new
│┄ Format-specific differences are supported for ext2/ext3/ext4/btrfs/fat filesystems but no file-specific differences were detected; falling back to a binary diff. file(1) reports: DOS/MBR boot sector, code offset 0x3c+2, OEM-ID "mkfs.fat", sectors/cluster 4, root entries 512, sectors 2048 (volumes <=32 MB), Media descriptor 0xf8, sectors/FAT 2, sectors/track 16, serial number 0x1234abcd, label: "MEDIA ", FAT (12 bit)
│┄ Installing the 'guestfs' Python module may produce a better output.
@@ -157,23 +157,23 @@
000009c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
000009d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
000009e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
000009f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000a00: 4d45 4449 4120 2020 2020 2008 0000 5a4b MEDIA ...ZK
00000a10: 6e46 6e46 0000 5a4b 6e46 0000 0000 0000 nFnF..ZKnF......
00000a20: 5052 4553 4545 4420 4346 4720 1800 0000 PRESEED CFG ....
-00000a30: 21ec 21ec 0000 0000 21ec 0200 f50d 0000 !.!.....!.......
+00000a30: 21ec 2859 0000 0000 21ec 0200 f50d 0000 !.(Y....!.......
00000a40: 4365 0000 00ff ffff ffff ff0f 0000 ffff Ce..............
00000a50: ffff ffff ffff ffff ffff 0000 ffff ffff ................
00000a60: 0272 002d 0062 006f 006f 000f 0000 7400 .r.-.b.o.o....t.
00000a70: 2e00 7300 6500 7200 7600 0000 6900 6300 ..s.e.r.v...i.c.
00000a80: 0173 0068 0075 0074 0064 000f 0000 6f00 .s.h.u.t.d....o.
00000a90: 7700 6e00 2d00 6100 6600 0000 7400 6500 w.n.-.a.f...t.e.
00000aa0: 5348 5554 444f 7e31 5345 5220 0000 0000 SHUTDO~1SER ....
-00000ab0: 21ec 21ec 0000 0000 21ec 0400 3002 0000 !.!.....!...0...
+00000ab0: 21ec 2859 0000 0000 21ec 0400 3002 0000 !.(Y....!...0...
00000ac0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000ad0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000ae0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000af0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000b00: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000b10: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000b20: 0000 0000 0000 0000 0000 0000 0000 0000 ................
Here it really look like a timestamp, and since mdir gave no
difference between the 2 files inside the 2 images, I patched mdir
with the following patch:
@@ -438,6 +438,18 @@ static int list_file(direntry_t *entry, MainParam_t *mp UNUSEDP)
if(*mdir_longname)
printf(" %s", mdir_longname);
printf("\n");
+
+ printf("-> ctime_ms: 0x%hhx\n", entry->dir.ctime_ms);
+ printf("-> ctime[0]: 0x%hhx\n", entry->dir.ctime[0]);
+ printf("-> ctime[1]: 0x%hhx\n", entry->dir.ctime[1]);
+ printf("-> cdate[0]: 0x%hhx\n", entry->dir.cdate[0]);
+ printf("-> cdate[1]: 0x%hhx\n", entry->dir.cdate[1]);
+ printf("-> adate[0]: 0x%hhx\n", entry->dir.adate[0]);
+ printf("-> adate[1]: 0x%hhx\n", entry->dir.adate[1]);
+ printf("-> time[0]: 0x%hhx\n", entry->dir.time[0]);
+ printf("-> time[1]: 0x%hhx\n", entry->dir.time[1]);
+ printf("-> date[0]: 0x%hhx\n", entry->dir.date[0]);
+ printf("-> date[1]: 0x%hhx\n", entry->dir.date[1]);
} else {
char tmp[4*MAX_VNAMELEN+1];
And this then gives the following diff:
-> ctime[1]: 0x0
-> cdate[0]: 0x21
-> cdate[1]: 0xec
--> adate[0]: 0x21
--> adate[1]: 0xec
+-> adate[0]: 0x28
+-> adate[1]: 0x59
-> time[0]: 0x0
-> time[1]: 0x0
-> date[0]: 0x21
@@ -20,8 +20,8 @@
-> ctime[1]: 0x0
-> cdate[0]: 0x21
-> cdate[1]: 0xec
--> adate[0]: 0x21
--> adate[1]: 0xec
+-> adate[0]: 0x28
+-> adate[1]: 0x59
-> time[0]: 0x0
-> time[1]: 0x0
-> date[0]: 0x21
This means that the access date difers. This also explains why it was
not spoted during the creation of the commit
9cc02ddde1 ("packages: roms: Start
adding automatic tests.") as tests were done at the same date.
So this time I created a build VM by adding the following service to
my Guix system configuration (I also had to remove hacks I had that
set the kvm group id to the same ID used by Trisquel run 'guix system
reconfigure' and rebooted):
(service virtual-build-machine-service-type
(virtual-build-machine
(cpu "host")
(cpu-count 2)
(auto-start? #f)))
This created a VM whose clock is set to 'a few years ago' according to
the Guix manual[1].
[1]https://guix.gnu.org/manual/devel/en/html_node/Virtualization-Services.html#Virtual-Build-Machines
I then ran built the image as usual:
$ guix time-machine --commit=v1.4.0 -- build -L resources/guix/ \
gnuboot-trisquel-preseed.img
--without-tests=gnuboot-trisquel-preseed.img
I then copied the resulting image, started the build VM with 'herd
start build-vm', deleted the old image from the store (with 'guix gc
-D') and then re-built it (it used the VM to offload the build as
shown in the build logs).
And now both resulting files are now the same despite being built on a
different date.
See also the following blog post for more context into use cases for
this build VM[2]:
[2]https://hpc.guix.info/blog/2024/03/adventures-on-the-quest-for-long-term-reproducible-deployment/
Bug: https://savannah.gnu.org/bugs/?66224
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
The image resulting from the gnuboot-trisquel-preseed.img package is
checked against checksums inside the 'check function of this package.
If for some reasons we want to update the checksums, an easy way to do
it is to build the package but not run the 'check function and do the
checksum on the resulting file. The Guix 1.4.0 manual explains how to
not run 'check with the "--without-tests=package" option in the
"10.1.2 Package Transformation Options" section.
However if we attempt that with the following command, the
without-tests has no impact at all:
$ guix time-machine --commit=v1.4.0 -- build -L resources/guix/ \
gnuboot-trisquel-preseed.img \
--without-tests=gnuboot-trisquel-preseed.img
This changes makes the above command work as expected.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
The test data consists mostly in nonfree boot firmware images. The
images contain nonfree binaries like for instance microcode updates
without complete and corresponding source code.
As more and more boot firmware images are added over time it's a good
idea to just remove everything in that directory to make sure that we
don't ship nonfree software from that directory again, while also
lowering the maintenance costs.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
This commit fixes an error encountered on Trisquel 11 while trying to
build the fam15h coreboot crossgcc 8.3.0:
In file included from /usr/include/signal.h:328,
from /usr/include/x86_64-linux-gnu/sys/param.h:28,
from ../../gcc-8.3.0/gcc/system.h:298,
from ../../gcc-8.3.0/gcc/ada/init.c:65:
../../gcc-8.3.0/gcc/ada/init.c:575:18: error: missing binary operator before token "("
575 | # if 16 * 1024 < MINSIGSTKSZ
| ^~~~~~~~~~~
make[1]: *** [Makefile:1110 : ada/init.o] Erreur 1
The changes of the GLIBC that removed the MINSKTSZ constant was
introduced only for systems using the Linux kernel, and while the
changelog is recommanding using sysconf to get the value of
`_SC_MINSTKSZ`. The problem is that it does not allow to get the value
in the preprocessor context.
This error has been corrected on upstream GCC by Eric Botcazou <ebotcazou@adacore.com>
but this was not applied on upstream coreboot (even 4.11 branch).
It has been accepted by GCC and the bug report has been set as RESOLVED
FIXED, meaning it solved the bug.
The MINSTKSZ patch is needed for all GCC versions from 8 to 9, since this
commit solved the bug for 9, 10 and later versions. It has been adopted
by OpenSUSE for its GCC 8 package:
https://build.opensuse.org/projects/devel:gcc/packages/gcc8/files/gcc8-ada-MINSTKSZ.patch
Here's the corresponding patch header (in debian's format:
https://dep-team.pages.debian.net/deps/dep3/):
Origin: upstream, https://gcc.gnu.org/git/gitweb.cgi?p=gcc.git;h=a5a7cdcaa0c29ee547c41d24f495e9694a6fe7f1
Bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99264
Bug-GNU Boot: https://savannah.gnu.org/bugs/?64870
The MINSTKSZ patch added by this commit is unmodified from the
OpenSUSE one mentioned above, and the OpenSUSE patch is probably a
backport of the upstream GCC patch as there is not difference in what
it does.
Signed-off-by: Adrien 'neox' Bourmault <neox@gnu.org>
GNUtoo: small formatting of the commit message + last paragraph.
Acked-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
We have a test for catching a situation where new files are added in
releases without adding them as well in the ${release_files} variable
to test for their existance.
But this test only warn of the issue instead of failing. And since
people might not inspect all the log details in depth, it's better to
fail instead.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien Bourmault <neox@gnu.org>
Before this commit if some files were in the release directory but
missing from ${release_files}, it would show something like that:
[ !! ] release/i945-thinkpads-install/gnuboot_src.tar
The ${release_files} variable is used to test for files missing in the
release directory, and it prints something if a file is missing:
[ !! ] release/roms/gnuboot-0.1-rc3-95-g1783708_d510mo.tar.xz is missing
Since confusion is possible between the two tests (especially if the
people looking at the log don't have all the code and context in mind
when doing that), this commit changes the code to print something like
that instead:
[ !! ] release/i945-thinkpads-install/gnuboot_src.tar missing in ${release_files}
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
neox: fixed commit message
Acked-by: Adrien Bourmault <neox@gnu.org>
This was broken by the commit 7df6d6169b
("Build bucts and patched flashrom for I945 ThinkPads with Guix.").
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien Bourmault <neox@gnu.org>
Without that fix the build is stuck on the following during days on a
ThinkPad X200 with 8GiB of RAM and an Intel P8600:
building /gnu/store/z7k1rs4j98s5zj0f9xrn1p3k1w1fmgqa-proot-static-5.3.0.drv...
/ 'check' phase
And the Guix manual says the following about -R/-RR:
When this option is passed once, the resulting binaries require
support for “user namespaces” in the kernel Linux; when passed
_twice_(1), relocatable binaries fall to back to other techniques
if user namespaces are unavailable, and essentially work
anywhere—see below for the implications.
So by using -R instead of -RR we don't build proot-static anymore, and
we rely on the fact that most GNU/Linux distribution have namespaces
enabled (else a lot of packages like Guix or container software
would not work on them).
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
neox: fixed typo in commit message
Acked-by: Adrien Bourmault <neox@gnu.org>
We need to somehow isolate the git configuration being used to build
GNU Boot from the rest of the system as otherwise things like
automatic gpg signatures can kick in and block the build because it
waits for a pinentry.
In addition:
- It enables us to simplify the build code as the git configuration is
now the same during all the build.
- Contributors don't need to setup git anymore just to build GNU
Boot. This also makes GNU Boot a bit more reproductible.
Replacing git inside the build scripts / Makefiles enable us to still
run them manually (like ./resources/packages/coreboot/download).
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien Bourmault <neox@gnu.org>
The resources/packages/roms/boot script already work with the "help"
argument, however most of the other scripts use --help, so for
consistency we need to add --help as well.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien Bourmault <neox@gnu.org>
The Intel Flash Descriptor files are supposed to be reproducible
already, so it's a good idea to add a test for that.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien Bourmault <neox@gnu.org>
Without that fix, with a very basic Trisquel 11 (aramo) installation
and after running resources/dependencies/trisquel-10, the GNU Boot
autogen.sh is broken due to the lack of libtool:
$ ./autogen.sh 2>&1 > temp
autoreconf: export WARNINGS=
autoreconf: Entering directory '.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force
autoreconf: configure.ac: tracing
autoreconf: configure.ac: not using Libtool
autoreconf: configure.ac: not using Intltool
autoreconf: configure.ac: not using Gtkdoc
autoreconf: running: /usr/bin/autoconf --force
configure.ac:79: error: possibly undefined macro: AC_PROG_LIBTOOL
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
autoreconf: error: /usr/bin/autoconf failed with exit status: 1
So we simply make sure that libtool is installed as part of the
dependencies.
For Arch, libtool is already in base-devel (checked with Parabola).
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien Bourmault <neox@gnu.org>
In GNU Boot, at the time of writing, we want to advise users to use
the GRUB images as they don't require users to modify their
distribtions.
However before the commit aec2e2f2bcf7693a05e416f9722e15b9d1854516
("Fix bug #65663 (No support for LVM2)."), most computers using LVM2
would not boot with these images.
The bug is now fixed by this commit, however since we ship a custom
grub.cfg and that it is very important to get it right, it's a good
idea to have some sort of automated testing for it.
It uses Trisquel (instead of other FSF certified distributions) for
several reasons:
- Trisquel can be used by less technical users, and so it's important
to make sure it works as less technical users tend to have harder
times finding workaround when things break.
- It's probably the GNU/Linux distribution that most current and
potential GNU Boot users use.
- It is also maintained by a community that welcome contributions, so
if we hit some issues, we can also contribute to get it fixed (we
also verified that multiple times by contributing to it).
Note that we also welcome tests that reuse other distributions as
well.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
neox: fixed typos in the commit message and fixed copyright notice
Acked-by: Adrien Bourmault <neox@gnu.org>
The xz compression operation can be quite long, so it's a good idea to
show its progression.
To do that we need to produce a tarball file first as xz doesn't have
any idea of the progression when just compressing a piped stream of
data.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien Bourmault <neox@gnu.org>
Without that fix, 'make release' results in the following issue:
resources/scripts/misc/generate-configure-makefiles.sh:
line 46: ./autogen.sh: No such file or directory
make: *** [Makefile:711: release] Error 127
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
Without that fix we have the following when running 'make release':
make[1]: Leaving directory '/home/gnutoo/work/projects/gnuboot/gnuboot'
cp: cannot stat 'i945-thinkpads-install-utilities/':
No such file or directory
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
The creation of what became grub_memdisk.cfg can be tracked back to
the grub.cfg that I published in 2013 in my build-makefiles repository
and that is available in the very first Libreboot release in
build-makefiles/grub/memdisk/boot/grub/grub.cfg.
It was then modified by leah in 2014 who removed most of my work from
it. Details can be seen in the following repository:
[1]https://notabug.org/libreboot/obsolete-repository-preserved-for-historical-purposes
It was then picked up as-is in the osbmk repository and then the lbmk
repository that GNU Boot also has the history of.
Since we now have proper copyright history in all the files in
resources/grub/config we can now safely remove the AUTHORS file.
As for the COPYING file, we already have copyright headers and we
already ship a copy of the GPLv3 in our repository.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
The resources/packages/src/release content appeared in osbmk in the
2e2fe863172b513c3bdd4d0497657223ff6abdb4 ("Retroboot beta release,
20201228"). This commit is present in both the master branch and the
libre branch of osbmk.
The libre branch was then used as a basis to the (first) commit
89517ed6b9 ("libreboot!").
Then since GNU Boot kept the history of lbmk, we then have the rest of
the history of that file.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
The GNU Boot project merged several repositories in its main git
repository, each with their separate histories. So far we have:
- the documentation/website that came from Libreboot
- the documentation/website pictures that also came from Libreboot
- the build system that also came from Libreboot (it's called lbmk there).
- some website autotools build system that was made from scratch by me.
The grub.cfg we use comes from the build system repository (lbmk). I
extracted the copyrights from the git commits of this repository.
However the first commit of lbmk (which we also have in our main GNU
Boot repository) is the following:
commit 89517ed6b9
Author: [Leah Rowe]
Date: [2021]
libreboot!
this is forked from the "libre" branch in osboot, which is itself a libre,
deblobbed fork of osboot, a blobbed up fork of libreboot
libreboot needed to be purged clean. this is the new libreboot development
repository. the old one has been abandoned
So I had to continue and look at the libre branch of osboot and
extract the copyrights from its commits as well.
Then I downloaded osbmk (https://notabug.org/osboot/osbmk) and
continued to look.
And here too we need to go beyond the first commit again, because
osbmk is based on 'Libreboot 20160907':
commit df76c3eb63dd8f4979d78ca262218eedb93512ed
Author: [Leah Rowe]
Date: [2020]
Fork Libreboot 20160907 build system. Large parts have been re-written.
This build system builds ROMs for X230, but they are so far untested.
Use at your own risk!
I still need to write documentation and do testing.
SOON: T60 with ATI GPU
We can find Libreboot 20160907 in
https://notabug.org/libreboot/obsolete-repository-preserved-for-historical-purposes
And then we end up with this commit:
commit cee90ae0fce6d6aee8d78969b60c952c8890abd6
Author: [Leah Rowe]
Date: [2014]
Libreboot release 6 beta 1.
Before that Libreboot only had tarball releases and the very first
tarball release was based on build scripts/Makefiles made by me, and
the git repository having the GRUB configuration can be found in
Libreboot 20131212 in X60/build-makefiles.
commit 80c37b9093be8325bf9ca8271ae4c6dba8fe81d6
Author: [GNUtoo]
Date: [2013]
Initial commit.
For now we only build the grub payload.
Signed-off-by: [GNUtoo]
And the intial grub.cfg was made by hand by me.
While I was at it I also updated the name/email combination in the
copyright header for the ones currently used.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
Even if we still don't have any installation instructions that use
these tools, we still need to document somehow what the targets to.
And not adding a help for that would make it inconsistent with the
other targets that are somewhat documented in make help.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
Before being merged with the commit
dc6e1f32c1 ("Import website-build to
build the GNU Boot website."), website-build was a separate git
repository.
And so, even after the merge, until the commit
20d122e94a ("website-build: use website
from local git repository."), it still worked in the same way and
still downloaded the website from git.
This prevented merging the website and website-build directories
together as the GNU Boot repository also needed to be a valid Untitled
website repository as well.
Now after this commit, the website is built from the same git tree, so
we can simply adjust the build scripts to be able to move things
around.
In addition of making things more clear for contributors, it also
simplify the migration to haunt as with haunt we typically have the
haunt.cfg (and the autotools build code if needed) code in the top
directory and the markdown files in a subdirectory.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
GNU Boot can be installed on some I945 ThinkPads without disassembling
them. To do that it requires both a patched flashrom and bucts.
This build them and also integrate Guix in GNU Boot as a dependency to
build them.
This will enable us to later on ship these utilities and then update
the installation instructions to use them somehow.
It also makes sure that we have proper authorship of the patch used
for flashrom and also unify the two flashrom patches not to require
two different flashrom binaries.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
The goal here is to be able to add configure options later on.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
Without this fix, running shellcheck -x on
resources/scripts/misc/guix.sh returns many errors.
For each guix version declaration we have something like that:
In resources/scripts/misc/guix.sh line 21:
guix_v0_0="6365068393254e1131ab80eb0d68a759e7fd2256"
^-------^ SC2034 (warning): guix_v0_0 appears unused.
Verify use (or export if used externally).
and here the variables are actually used in this code:
guix_version_commit()
{
version="$1"
eval echo "$(echo \$guix_"${version}" | sed 's#\.#_#g')"
}
so we workaround by disabling that test for each version declaration.
Then shellcheck cannot find "$GUIX_PROFILE"/etc/profile:
In resources/scripts/misc/guix.sh line 91:
. "$GUIX_PROFILE"/etc/profile
^-------------------------^ SC1091 (info):
Not following: ./etc/profile: openBinaryFile:
does not exist (No such file or directory)
so we disabled that test for this line.
After that we have many issues with quoting like this one:
In resources/scripts/misc/guix.sh line 104:
eval echo $(echo \$guix_"${version}" | sed 's#\.#_#g')
^-- SC2046 (warning):
Quote this to prevent word splitting.
or this one:
In resources/scripts/misc/guix.sh line 233:
major="$(echo ${version} | awk -F . '{print $1}')"
^--------^ SC2086 (info):
Double quote to prevent globbing and word splitting.
these were fixed.
We also improved a test by using grep -q:
In resources/scripts/misc/guix.sh line 272:
elif [ -n "$(echo ${revision} | grep '\.')" ] ; then
^-- SC2143 (style):
Use grep -q instead of comparing output with [ -n .. ]
And finally in guix_version_commit a sed was avoided by using bash
replacement, and when that was not possible (in guix_next_version),
the shellcheck test for that was disabled.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
For some reason, 'make release' produces the following files:
- release/roms/gnuboot-lbwww-20211122-328-gafe01fb_default.tar.xz
- release/roms/gnuboot-lbwww-20211122-328-gafe01fb_fam15h_rdimm.tar.xz
- release/roms/gnuboot-lbwww-20211122-328-gafe01fb_fam15h_udimm.tar.xz
This commit works around that issue.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
We also need to check if we have all the files and no superfluous
files inside the released archives.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
This has several goals:
- It checks if the test works fine and if someone forgot to add some
files.
- It checks if the build system produces files that it should not
produce due to some bugs.
- It can also check if some leftover files are there from previous
builds. This can help avoiding pushing wrong files as part as a
release.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
This makes sure that the release at least has all the expected files.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
Without that fix building images with make release or './build release
all' results in the following error:
[...]
Built lenovo/t400 (ThinkPad R400)
make[1]: Leaving directory '/home/gnutoo/gnuboot/coreboot/default'
Creating new ROM image: bin/r400_16mb/seabios_withgrub_r400_16mb_libgfxinit_corebootfb_colemak.rom
Usage:
./build <TASK> <PACKAGE>
./build --help
[...]
Refer to the gnuboot documentation for more information.
Error: Invalid task 'descriptors'.
Error: See './build --help'.
Error: build/roms: something went wrong
make: *** [Makefile:47: release] Error 1
This was broken by the commit 857afa42a8
("Switch to packages structure.").
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
Since we use untitled as well it's a good practice to release its
corresponding source code as well to make sure people can rebuild the
website in case upstream disapear.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
This was broken from the start in the commit
fe28bc3c82 ("dependencies: move into
single package.").
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
This was broken by the commit 8f3d30f809
("dependencies: rename debian in pureos-10.").
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
This was broken from the start in the commit
fe28bc3c82 ("dependencies: move into
single package.").
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
The "$(dirname $0)"/../dependencies/ directory is the same as
"$(dirname $0)".
So when running the script we have:
# ./resources/packages/dependencies/install
./resources/packages/dependencies/install: 49:
./resources/packages/dependencies/../dependencies/arch: not found
This was broken from the start in the commit
fe28bc3c82 ("dependencies: move into
single package.").
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
