This commit removes the generation of the unused seabios_vgarom.elf image.
Signed-off-by: Adrien 'neox' Bourmault <neox@gnu.org>
GNUtoo: Removed speculations from the commit message
Acked-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
The build system was designed to produce images with different GPU
drivers for a single computer and/or to show the image name in the
final image names, to enable users to know which GPU driver was used.
However since all boards have practically speaking the same GPU driver
('libgfxinit') this adds too much complexity for almost no benefits.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
The seabios_grubfirst images provides the same functionality than the
GRUB images, but instead of having GRUB being loaded directly by
Coreboot, Coreboot loads SeaBIOS which then loads GRUB.
These images probably exist to enable end users to try it to workaround
potential compatibility issues between the OS and GRUB with the GRUB
image as we have a BIOS implementation being loaded.
While this looks useful, it also makes things more complicated:
- It increase the number of images to choose from, and it's
complicated to explain the difference between grub and
seabios_grubfirst to end users.
For instance for the "x200_8mb", users need to choose between 2 GPU
modes (corebootfb, or txtmode) and 12 keyboard layouts. So having to
choose between 2 payloads instead of 3 with one difference that is
hard to understand makes things easier.
- It makes testing more complicated as we have one more payload to
test and we also need to make sure to always differenciate both
images in bug reports, documentation, etc.
And if issues arise from this change in the future, we could work with
upstream to fix them and/or replace the grub images with
'seabios_grubfirst' while keeping the 'grub' name to avoid
complicating things by having two main payloads with identical
features.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
neox: fixed typos in commit message
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
Without that fix building images with make release or './build release
all' results in the following error:
[...]
Built lenovo/t400 (ThinkPad R400)
make[1]: Leaving directory '/home/gnutoo/gnuboot/coreboot/default'
Creating new ROM image: bin/r400_16mb/seabios_withgrub_r400_16mb_libgfxinit_corebootfb_colemak.rom
Usage:
./build <TASK> <PACKAGE>
./build --help
[...]
Refer to the gnuboot documentation for more information.
Error: Invalid task 'descriptors'.
Error: See './build --help'.
Error: build/roms: something went wrong
make: *** [Makefile:47: release] Error 1
This was broken by the commit 857afa42a8
("Switch to packages structure.").
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
It is possible to install GNU Boot on I945 Thinkpads without opening
the computer even if the nonfree bios sets the bootblock region (the
last 64K of the flash chip) read-only.
The flash chip looks like that:
+----- -----+---------------------------+-------------------------+
| ... | Secondary bootblock (64k) | Primary bootblock (64k) |
+----- -----+---------------------------+-------------------------+
0 0x1e0000 2MiB
To bypass the read-only restriction we use an utility (bucts) that
tells the hardware to swap the primary bootblock with the secondary
one for the next boot. We then have to disable that swap and reflash
again.
CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK generates the two bootblocks
directly in coreboot so we don't need to use special commands to do
that anymore.
In addition the MacBook 1.1 and 2.1 are known not to have such
read-only restrictions so they don't need to have
CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK enabled.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
The various build scripts are scattered around in multiple
places. This make it hard for contributors to understand what they
need to modify.
Most GNU Boot users are interested in running GNU/Linux or BSD
operating systems. And the way to install software on these
operating systems is through a package manager. So most users and
contributors already know the package manager abstraction.
So using that abstraction makes it easier to find where things are.
The scripts to install dependencies don't really fit the new structure
but for now we move them in to make sure that everything works
fine. This could be fixed later on and migrated to a single
dependencies packages by auto-detecting the distribution with
/etc/os-release.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
Signed-off-by: Adrien 'neox' Bourmault <neox@gnu.org>
Adrien Bourmault
