diff --git a/README-english.md b/README-english.md
new file mode 100644
index 0000000..e2c2d9d
--- /dev/null
+++ b/README-english.md
@@ -0,0 +1,299 @@
+# GSL: Statique Littérateur
+------------------------------------------------------------------------
+
+GSL is a multiple blogs/websites generator based on their domain, 
+written in bash, for minimal dependancies. The websites are nearly all
+static, except for some includes pages, like listing posts, that nginx
+can easily get, in your webserver.
+
+# Dependancies
+------------------------------------------------------------------------
+
+- bash
+- coreutils
+- curl (to check Posts links response)
+- rsync
+
+
+# GSL: Installation
+------------------------------------------------------------------------
+In your System /
+```
+git clone URL .
+```
+
+GSL does NOT use any sudo. To avoid errors, you must give permissions
+to USER with chown -R to folders.
+
+## --Prefix for DOMAIN configuration (set according to user choice):
+- HOME:   ~/.config/gsl
+- GLOBAL: /var/lib/gsl
+- Folder: --Prefix/domains/ (created with $ gsl new)
+
+### DOMAIN Datas from Prefix:
+- Folder: --Prefix/DOMAIN/ (Created by GSL)
+- - Files: DOMAIN.conf, authors.db (Created by GSL)
+- - Folder: --Prefix/DOMAIN/templates/ (css, logos...) (Created by GSL)
+
+## Destination Folder: /etc/gsl/
+- File: gsl.conf
+
+## Destination Folder: /var/lib/gsl/
+- Folder: db (Created by GSL)
+- Folder: helps
+- Folder: scripts
+- File: README.md
+
+## Destination Folder: /var/log/gsl
+- File: gsl.log (Created and managed by GSL $ gsl log clean...)
+
+## Destination Folder: /usr/local/bin
+- File: gsl
+
+## Destination Folder: /usr/share/bash-completion/completions/gsl
+- File: gsl
+
+# How to configure a DOMAIN folder, and create a Post
+------------------------------------------------------------------------
+
+When Adding a DOMAIN (example.com), GSL will ask you some questions.
+Datas will be used to create a DOMAIN.conf file. GSL will also ask you
+to set a folder where you will put your Posts, but you can create or add
+ones too.
+
+## Set a DOMAIN
+- add a DOMAIN name (if not alrady done)
+```
+gsl new
+```
+
+Follow instructions when adding DOMAIN or see them again with
+```
+gsl help new
+gsl help install
+```
+
+## Set a DOMAIN folder for Posts (if not already done by GSL or You)
+
+- Add/Create or go into your folder of choice
+- Save into that folder a blank file named gsl.DOMAIN (gsl.example.org)
+so that GSL, knows this folder is for this DOMAIN website.
+
+## Create a new Post
+The engine is written from scratch and looks like a mix of markdown and
+ReStructuredText. It's very easy to learn and use.
+
+- Write a post in a file, using some "metas" that GSL will catch. 
+- Save your file with .gsl extension
+- Start checking it, using:
+
+```
+gsl check
+```
+
+## Convert one or all Posts
+If your Post has no error, you will have to deploy html
+files and folders. You could install nginx, or lightweight darkhttpd
+webserver on your PC to preview the website. You can also just open
+index.html in your server folder, but you won't be able to see some extra
+includes page, like Posts listing.
+
+To convert your Posts in HTML, use
+
+```
+gsl make
+```
+
+You can select a specific post, with autocompletion to check and make
+only that specified one.
+
+# Create a Templates
+------------------------------------------------------------------------
+
+You will have to create some CSS (styles.css) in your /DOMAIN/templates/
+- HOME:   ~/.config/gsl/domains/DOMAIN/templates/
+- GLOBAL: /var/lib/gsl/domains/DOMAIN/templates/
+
+# How to Write a Post
+------------------------------------------------------------------------
+
+Post has 2 sections : Before and After #1. #1 is the FIRST Title of your
+post. #(1-6) are HTML titles.
+- Before #1 is used to set METAs HEADERS to configure your Post.
+- From #1 is the CONTENT of your Post
+
+## NEEDED HEADERS (before #1)
+Register METAs for HTML Page content
+
+```
+title: POST TITLE
+slug: POST-TITLE (if space in slug GSL will convert them)
+info: DESCRIPTION (about the Post)
+author: NAME (must be registred ($ gsl author add)
+date: YYYY-MM-DD
+tags: TAG1,OTHER TAG2,TAG3 (comma separated)
+```
+
+### Admin Header
+Admin can define specific type of content. If no type defined, GSL will
+add at first line the default value: "type: post".
+
+TYPE:
+- post < classic content
+- page < used to define main index, 404, about...
+
+```
+type: TYPE
+```
+
+GSL will create html file according to slug. Do not add .html to slug.
+- post < /slug/index.html
+- page < /slug.html
+
+## Optional HEADERS (before #1)
+Register METAs for CONTENT. " : " field separator
+
+```
+abbr: SHORT : LONG
+file: NAME : FILENAME : Alt Text
+link: NAME : URL : Alt Text
+code: NBR : FILENAME : Alt Text
+image: NBR : FILENAME : ALT-TEXT
+```
+
+## CONTENT Post:
+In Content Post, markers (i.e. __My Great file) must be on the SAME line.
+For ABBRs, just write SHORT in your content
+
+```
+# Paragraphs
+At begining of new line, open with ( and close with )
+Set till 3 different classes with ( 1 ( 2 ( 3
+( 2
+This is a paragraph with class 2
+)
+
+# Register in Header. link: My Great Link : URL : Alt text
+_My Great Link
+_My Great Link+ # Open in new tab
+
+# Register in Header. file: My Great file : FILENAME : ALT-TEXT
+__My Great file
+
+# Register in Header. image: 1 : FILENAME : ALT-TEXT
+_image:1:[OPT l|r|c (left, right, center, alignment)]
+_image:1:r
+
+# Block-Code File: Register in Header. code: 1 : FILENAME : Alt Text
+_code:1
+
+# Write in STRONG
+**this strong content**
+this un**believe**able content
+this border**line** content
+
+# BOLD
+*this bold content*
+...
+
+# Write in ITALIC
+/this em text/
+
+# Inline-code (¤ = alt-gr + $ on FR keyboard)
+¤push()¤
+
+# Simple Blockquote: Use 3 "-"
+---
+(
+A simple great quote
+)
+---
+
+# Advanced Blockquote
+---
+_cite : Richard Matthew Stallman
+_link : https://stallman.org/
+_lang : en
+(
+In the free/libre software movement, we develop software that respects
+users' freedom, so we and you can escape from software that doesn't. I
+could have made money this way, and perhaps amused myself writing code.
+But I knew that at the end of my career, I would look back on years of
+building walls to divide people, and feel I had spent my life making the
+world a worse place
+)
+---
+
+# For advanced blockquotes, you can also add, if known:
+_year: 2021
+_book: Esperanza 64
+
+# Create Lists
+Use = to create an item. You can use infinite sub-items, but each Item
+of a list MUST be on the same Line
+(
+Let's start a list
+= Item 1 is *great*
+== sub-item 1 
+== sub-item 2
+=== sub-sub-item 1 of sub-item 2
+== sub-item 3
+= Item 2
+== sub-item 1 of Item 2
+This list is ended
+)
+```
+
+# HELP COMMAND
+```
+$ gsl [ARG]
+  readme                  : Show README.md instructions
+  help | -h [OPT]         : This Help
+    install               : Show process installation
+    new                   : Adding a DOMAIN
+    write | -w            : How to write a Post
+
+  new | -N                : Add and configure a new DOMAIN
+   
+  log | -L [OPTS]         : Show logs from all sessions
+    clean | -C            : Logs saved to {DATE}.gsl.log and cleaned
+    -i | -w | -e          : from levels (infos, warnings, errors)
+    -s                    : from last session only
+    [TERM]                : [TERM] : case insensitive, regex 'T1.*T2'
+                            (i.e. $ gsl log -e -s code)
+
+  author | -A [OPT]       : List authors from DOMAIN set in PWD folder
+    add                   : Add author(s) for DOMAIN
+    remove                : Remove author(s) for DOMAIN
+   
+  edit | -E [FILE]        : Open in default EDITOR [FILE] or with nano
+  db [FILE]               : Show DB statuses from [FILE]
+
+  sync [OPT]              : Sync Templates to www and wip
+    wip                   : Only to wip server (also done with make)
+    www                   : Only to www server (also done with www)
+    
+
+  check | -C [OPT] [FILE] : Check Posts errors from PWD folder or [FILE]
+    -F                    : Force check again
+    
+  make | -M [OPT] [FILE]  : Convert Posts from PWD folder or [FILE]
+                            to HTML file in server
+    -F                    : Force Make again
+    
+  post-list [OPT] [FILE]  : Add post again from [FILE] to Last-Posts List
+                            (When converting new post, it will be added)
+    Pin                   : Set Post from [FILE] to first in Last-Posts List
+    Add                   : Add Post from [FILE] to last in Last-Posts List
+  
+  www [OPT1] [OPT2]       : Add/Remove Post from www server
+    [OPT1]:
+      add                 : Add all/[FILE] to www server
+      rmove               : remove all/[FILE] from www server
+    [OPT2]:
+      all                 : Select all post with wip statuses
+      [FILE]              : Select specific post (if wip status)
+  
+  version | -v            : Show local versionn
+  -vv                     : Shown local and repo Versions
+```
diff --git a/README.md b/README.md
index 5d656ca..90b328c 100644
--- a/README.md
+++ b/README.md
@@ -1,12 +1,13 @@
 # GSL: Statique Littérateur
 ------------------------------------------------------------------------
 
-GSL is a multiple blogs/websites generator based on their domain, 
-written in bash, for minimal dependancies. The websites are nearly all
-static, except for some includes pages, like listing posts, that nginx
-can easily get, in your webserver.
+GSL est un générateur de blogs/sites-web basé sur leur nom de domaine,
+écrit en bash, afin de ne réduire ses dépendances au minimum. Les pages
+générées sont presque entièrement statiques, à l'exception du module de
+liste des derniers articles. Nginx peut être facilement configuré pour
+interprêter ce module.
 
-# Dependancies
+# Dépendances
 ------------------------------------------------------------------------
 
 - bash
@@ -17,199 +18,232 @@ can easily get, in your webserver.
 
 # GSL: Installation
 ------------------------------------------------------------------------
-In your System /
-```
-git clone URL .
-```
+Une procédure d'installation via un setup est en cours de test. Il est
+aussi possible et recommandé sous debian de l'installer grâce à son 
+paquet deb.
 
-GSL does NOT use any sudo. To avoid errors, you must give permissions
-to USER with chown -R to folders.
+Pour une installation manuelle, clonez ce dépôt, et copiez les dossiers
+déjà pré-établis dans le système. GSL n'utilise pas sudo, il vous faut
+donc donner les droits aux dossiers (chown -R) à l'utilisateur
+(sauf au dossier /usr/local/bin). Pour ce dossier, vous donnerez les droits
+via chown USER:USER /usr/local/bin/gsl
 
-## --Prefix for DOMAIN configuration (set according to user choice):
+## Configuration du DOMAIN (selon le choix de l'utilistaeur via $ gsl new) :
 - HOME:   ~/.config/gsl
 - GLOBAL: /var/lib/gsl
-- Folder: --Prefix/domains/ (created with $ gsl new)
+- Dossier: --Prefix/domains/ (créé par GSL via $ gsl new)
 
-### DOMAIN Datas from Prefix:
-- Folder: --Prefix/DOMAIN/ (Created by GSL)
-- - Files: DOMAIN.conf, authors.db (Created by GSL)
-- - Folder: --Prefix/DOMAIN/templates/ (css, logos...) (Created by GSL)
+### Données du DOMAIN :
+- Dossier: --Prefix/DOMAIN/ (créé par GSL)
+- - Fichiers: DOMAIN.conf, authors.db (créé par GSL)
+- - Dossier: --Prefix/DOMAIN/templates/ (créé par GSL - pour vos css, logos...)
 
-## Destination Folder: /etc/gsl/
-- File: gsl.conf
+## Dossier de configuration de GSL : /etc/gsl/
+- Fichier: gsl.conf
 
-## Destination Folder: /var/lib/gsl/
-- Folder: db (Created by GSL)
-- Folder: helps
-- Folder: scripts
-- File: README.md
+## Dossier principal : /var/lib/gsl/
+- Folder: db (créé par GSL)
+- Dossier: helps
+- Dossier: scripts
+- Fichier: README.md, README-english.md
 
-## Destination Folder: /var/log/gsl
-- File: gsl.log (Created and managed by GSL $ gsl log clean...)
+## Dossier des logs: /var/log/gsl/
+- Fichier: gsl.log (créé et géré par GSL via $ gsl log [OPT]...)
 
-## Destination Folder: /usr/local/bin
-- File: gsl
+## Dossier de l'éxécutable : /usr/local/bin/
+- Fichier: gsl
 
-## Destination Folder: /usr/share/bash-completion/completions/gsl
-- File: gsl
+## Dossier d'autocomplétion : /usr/share/bash-completion/completions/gsl/
+- Fichier: gsl
 
-# How to configure a DOMAIN folder, and create a Post
+# Comment configurer un domaine
 ------------------------------------------------------------------------
 
-When Adding a DOMAIN (example.com), GSL will ask you some questions.
-Datas will be used to create a DOMAIN.conf file. GSL will also ask you
-to set a folder where you will put your Posts, but you can create or add
-ones too.
+Des questions vous seront posées lorsque vous voudrez ajouter un domaine
+(exemple.com). Les données renseignées seront utilisées pour créer le
+fichier DOMAIN.conf. Une question spécifique pour les fichier des articles
+vous sera posée afin d'établir un dossier de stockage de vos articles.
+Vous pourrez en créer à loisir autant que vous voulez plus tard.
 
-## Set a DOMAIN
-- add a DOMAIN name (if not alrady done)
 ```
+# helps
+gsl help
+gsl help new
+gsl help install
+
+# Ajouter un domaine
 gsl new
 ```
 
-Follow instructions when adding DOMAIN or see them again with
+## Définir un dossier pour les articles du DOMAIN 
+Si ce n'est pas déjà fait par GSL, ou que vous voulez ajouter un dossier
+pour y stocker et convertir en HTML vos articles pour un DOMAIN prévis :
+
+- Ajouter/créer un dossier de votre choix
+- Créer un fichier vide nommé gsl.DOMAIAN (gsl.exemple.com)
+
+## Ajouter un auteur
 ```
-gsl help new
-gsl help install
+cd MON-DOSSER-ARTICLES
+gsl author add
 ```
 
-## Set a DOMAIN folder for Posts (if not already done by GSL or You)
+## Créer un article
+Le moteur de convertion est nouveau, et est un mélange entre markdown et
+reSTructuredText. Il est simple à apprendre et à utiliser.
 
-- Add/Create or go into your folder of choice
-- Save into that folder a blank file named gsl.DOMAIN (gsl.example.org)
-so that GSL, knows this folder is for this DOMAIN website.
-
-## Create a new Post
-The engine is written from scratch and looks like a mix of markdown and
-ReStructuredText. It's very easy to learn and use.
-
-- Write a post in a file, using some "metas" that GSL will catch. 
-- Save your file with .gsl extension
-- Start checking it, using:
+- Créer un fichier (monarticle).gsl (extension .gsl)
+- Suivez le guide plus bas pour comprendre les notions
 
+Vous devrez le faire valider par GSL :
 ```
 gsl check
 ```
 
-## Convert one or all Posts
-If your Post has no error, you will have to deploy html
-files and folders. You could install nginx, or lightweight darkhttpd
-webserver on your PC to preview the website. You can also just open
-index.html in your server folder, but you won't be able to see some extra
-includes page, like Posts listing.
-
-To convert your Posts in HTML, use
+## Convertir un ou tous les articles
+Si votre article n'a pas d'erreurs, vous pouvez le convertir en HTML.
 
 ```
 gsl make
 ```
 
-You can select a specific post, with autocompletion to check and make
-only that specified one.
+Votre article sera prêt dans le dossier webserver (ex: /var/www/DOMAIN/wip)
+Vous pourrez donc vérifier son rendu.
 
-# Create a Templates
+Si vous êtes satisfait, vous pouvez le déployer "officiellement" dans www
+
+```
+# Vous pouvez utiliser l'autocompletion pour les articles
+gsl www add (monarticle.gsl)
+```
+
+# Créer un Template
 ------------------------------------------------------------------------
 
-You will have to create some CSS (styles.css) in your /DOMAIN/templates/
+Vous devrez pour que votre site soit à vôtre goût créer et définir les
+styles dans styles.css. Placez ce fichier (en fonction du choix de votre
+configuration du DOMAIN) dans :
 - HOME:   ~/.config/gsl/domains/DOMAIN/templates/
 - GLOBAL: /var/lib/gsl/domains/DOMAIN/templates/
 
-# How to Write a Post
+Astuce: Une fois votre article créé, vous verrez dans sa source que
+beaucoup d'éléments ont une class="acronymechoisi_***". Utilisez ces classes.
+Pour mettre à jour et voir vos modifications
+
+```
+gsl sync
+# ou (si vous modifier le header/footer)
+gsl make -F
+```
+
+# Comment écrire un article
 ------------------------------------------------------------------------
 
-Post has 2 sections : Before and After #1. #1 is the FIRST Title of your
-post. #(1-6) are HTML titles.
-- Before #1 is used to set METAs HEADERS to configure your Post.
-- From #1 is the CONTENT of your Post
+Votre article doit contenir 2 sections. Les Metas avant #1 et 
+l'article à partir de ce repère (servant de titre h1).
+
+- METAS : configurer votre article (titre, date, liens...)
+- ARTICLE :  Contenue rédactionnel avec quelques marqueurs (gras...)
+
+## METAS obligatoires (avant #1)
 
-## NEEDED HEADERS (before #1)
-Register METAs for HTML Page content
 
 ```
 title: POST TITLE
-slug: POST-TITLE (if space in slug GSL will convert them)
-info: DESCRIPTION (about the Post)
-author: NAME (must be registred ($ gsl author add)
+slug: POST-TITLE (si espaces, GSL les convertira en -)
+info: DESCRIPTION (À propos de cet article)
+author: NAME (doit être enregistré via ($ gsl author add)
 date: YYYY-MM-DD
-tags: TAG1,OTHER TAG2,TAG3 (comma separated)
+tags: TAG1,Mon TAG2,TAG3 (séparé par une virgule)
 ```
 
-### Admin Header
-Admin can define specific type of content. If no type defined, GSL will
-add at first line the default value: "type: post".
+### Page ou Article ?
+Vous pouvez spécifiez pour chaque article si c'est une page ou un article
+Si non renseigné, GSL ajoutera le type: post (article) par défaut à la 
+première ligne de votre article
 
 TYPE:
-- post < classic content
-- page < used to define main index, 404, about...
+- post < Article
+- page < Page (créer vos pages: index, 404, about...)
 
 ```
 type: TYPE
 ```
 
-GSL will create html file according to slug. Do not add .html to slug.
-- post < /slug/index.html
-- page < /slug.html
+GSL créera vos fichier HTML selon le "slug" renseigné. Ne pas ajouter .html
+Selon le type: 
 
-## Optional HEADERS (before #1)
-Register METAs for CONTENT. " : " field separator
+- post < /POST-TITLE/index.html
+- page < /POST-TITLE.html
+
+## METAS optionnelles (avant #1)
+Définir les marqueurs (abbr:, link:...) et utilisr " : " comme séparateur
 
 ```
-abbr: SHORT : LONG
-file: NAME : FILENAME : Alt Text
-link: NAME : URL : Alt Text
-code: NBR : FILENAME : Alt Text
-image: NBR : FILENAME : ALT-TEXT
+abbr: COURT : LONG
+file: NOM : NOM-DU-FICHIER : Text alternatif
+link: NOM : URL : Text alternatif
+code: NUMERO : NOM-DU-FICHIER : Text alternatif
+image: NUMERO : NOM-DU-FICHIER : TEXT-ALTERNATIF
 ```
 
-## CONTENT Post:
-In Content Post, markers (i.e. __My Great file) must be on the SAME line.
-For ABBRs, just write SHORT in your content
+## Contenu de l'article:
+Les marqueurs (ex __Mon-super-fichier) doivent commencer et finir sur
+la même ligne. Pour les abréviations (abbr:), écrivez juste (ex: COURT).
+
 
 ```
-# Paragraphs
-At begining of new line, open with ( and close with )
-Set till 3 different classes with ( 1 ( 2 ( 3
+# Paragraphes
+Au début d'une nouvelle ligne, ouvrez avec ( et fermez avec ).
+Vous pouvez utiliser 4 classes de paragraphes différentes : ( 1 ( 2 ( 3
 ( 2
-This is a paragraph with class 2
+Paragraphe avec une classe 2 (css)
 )
 
-# Register in Header. link: My Great Link : URL : Alt text
-_My Great Link
-_My Great Link+ # Open in new tab
+# Liens
+(définir en METAS. ex: link: Mon lien : URL : Alt text)
+_Mon lien
+_Mon lien+ # Pour ouvrir dans un nouvel onglet
 
-# Register in Header. file: My Great file : FILENAME : ALT-TEXT
-__My Great file
+# Fichiers
+(définir en METAS. ex: file: Mon fichier : FILENAME : ALT-TEXT
+__Mon fichier
 
-# Register in Header. image: 1 : FILENAME : ALT-TEXT
-_image:1:[OPT l|r|c (left, right, center, alignment)]
+# Images
+(définir en METAS. ex:  image: 1 : FILENAME : ALT-TEXT
+_image:1
 _image:1:r
 
-# Block-Code File: Register in Header. code: 1 : FILENAME : Alt Text
+:[l|r|c] (gauche, droite, centre)
+
+# Block-Code depuis un fichier:
+(définir en METAS code: 1 : FILENAME : Alt Text
 _code:1
 
-# Write in STRONG
-**this strong content**
-this un**believe**able content
-this border**line** content
+# Écrire en très gras
+**c'est du surgras**
+c'est in**défini**ssable
+il ad**juge** : pas de pub !
 
-# BOLD
-*this bold content*
+# Gras
+*c'est en gras*
 ...
 
-# Write in ITALIC
-/this em text/
+# Italique
+écrire /en italique/
 
-# Inline-code (¤ = alt-gr + $ on FR keyboard)
-¤push()¤
+# Code en ligne (¤ = alt-gr + $ sur clavier FR azerty)
+¤gsl help -w¤
 
-# Simple Blockquote: Use 3 "-"
+# Citation simple
+(au début de la ligne, mettez 3x -)
 ---
 (
-A simple great quote
+Une citation simple dans un paragraphe
 )
 ---
 
-# Advanced Blockquote
+# Citation avancée
 ---
 _cite : Richard Matthew Stallman
 _link : https://stallman.org/
@@ -224,23 +258,24 @@ world a worse place
 )
 ---
 
-# For advanced blockquotes, you can also add, if known:
+# Citation avancée : optionnel
 _year: 2021
 _book: Esperanza 64
 
-# Create Lists
-Use = to create an item. You can use infinite sub-items, but each Item
-of a list MUST be on the same Line
+# Créer des listes
+(utilisez = pour définir l'arborescence). L'arborescence est "infie")
+(chaque contenu de la liste doit être sur la même ligne)
+
 (
-Let's start a list
-= Item 1 is *great*
-== sub-item 1 
-== sub-item 2
-=== sub-sub-item 1 of sub-item 2
-== sub-item 3
-= Item 2
-== sub-item 1 of Item 2
-This list is ended
+Voici une liste
+= Fruits : *mangez-en*
+== Kiwis
+== Fraises
+=== pas mûres
+== Bananes
+= Légumes
+== Épinards
+Fin de la liste
 )
 ```
 
@@ -266,7 +301,7 @@ $ gsl [ARG]
     add                   : Add author(s) for DOMAIN
     remove                : Remove author(s) for DOMAIN
    
-  edit | -E [FILE] [APP]  : Open in default EDITOR [FILE] or with APP
+  edit | -E [FILE]        : Open in default EDITOR [FILE] or with nano
   db [FILE]               : Show DB statuses from [FILE]
 
   sync [OPT]              : Sync Templates to www and wip
diff --git a/control b/control
index 974d80a..db50db1 100644
--- a/control
+++ b/control
@@ -1,5 +1,5 @@
 Package: egsl
-Version: 0.0.9
+Version: 0.0.10
 Section: custom
 Priority: optional
 Architecture: all
diff --git a/usr/local/bin/gsl b/usr/local/bin/gsl
index 30bc618..267566b 100755
--- a/usr/local/bin/gsl
+++ b/usr/local/bin/gsl
@@ -1,5 +1,5 @@
 #!/bin/bash
-# Version: 0.0.9
+# Version: 0.0.10
 # file: gsl
 # Folder: /usr/local/bin
 # By echolib
@@ -208,15 +208,10 @@ case "$1" in
       && exit 1
 
     gsl__if_file "$2" post
-    if ! [[ "$EDITOR" ]];then
-      if [[ "$3" ]];then
-        if__command "$3"
-        EDITOR="$3"
-      else
+      if ! [[ "$EDITOR" ]];then
         if__command nano
         EDITOR=`which nano`
       fi
-    fi
     
     gsl__logs_print \
       "$gsl_log_i" \
@@ -235,6 +230,7 @@ case "$1" in
 
     gsl_post_hash_old=$gsl_post_hash
     $EDITOR $PWD/$gsl_this_post
+    
     gsl__get_sum "$PWD/$gsl_this_post"
     if (( $gsl_post_hash != $gsl_post_hash_old ));then
       gsl_log_infos="NEW > Hash: $gsl_post_hash | Size: $gsl_post_size"
diff --git a/var/lib/gsl/README-english.md b/var/lib/gsl/README-english.md
new file mode 100644
index 0000000..e2c2d9d
--- /dev/null
+++ b/var/lib/gsl/README-english.md
@@ -0,0 +1,299 @@
+# GSL: Statique Littérateur
+------------------------------------------------------------------------
+
+GSL is a multiple blogs/websites generator based on their domain, 
+written in bash, for minimal dependancies. The websites are nearly all
+static, except for some includes pages, like listing posts, that nginx
+can easily get, in your webserver.
+
+# Dependancies
+------------------------------------------------------------------------
+
+- bash
+- coreutils
+- curl (to check Posts links response)
+- rsync
+
+
+# GSL: Installation
+------------------------------------------------------------------------
+In your System /
+```
+git clone URL .
+```
+
+GSL does NOT use any sudo. To avoid errors, you must give permissions
+to USER with chown -R to folders.
+
+## --Prefix for DOMAIN configuration (set according to user choice):
+- HOME:   ~/.config/gsl
+- GLOBAL: /var/lib/gsl
+- Folder: --Prefix/domains/ (created with $ gsl new)
+
+### DOMAIN Datas from Prefix:
+- Folder: --Prefix/DOMAIN/ (Created by GSL)
+- - Files: DOMAIN.conf, authors.db (Created by GSL)
+- - Folder: --Prefix/DOMAIN/templates/ (css, logos...) (Created by GSL)
+
+## Destination Folder: /etc/gsl/
+- File: gsl.conf
+
+## Destination Folder: /var/lib/gsl/
+- Folder: db (Created by GSL)
+- Folder: helps
+- Folder: scripts
+- File: README.md
+
+## Destination Folder: /var/log/gsl
+- File: gsl.log (Created and managed by GSL $ gsl log clean...)
+
+## Destination Folder: /usr/local/bin
+- File: gsl
+
+## Destination Folder: /usr/share/bash-completion/completions/gsl
+- File: gsl
+
+# How to configure a DOMAIN folder, and create a Post
+------------------------------------------------------------------------
+
+When Adding a DOMAIN (example.com), GSL will ask you some questions.
+Datas will be used to create a DOMAIN.conf file. GSL will also ask you
+to set a folder where you will put your Posts, but you can create or add
+ones too.
+
+## Set a DOMAIN
+- add a DOMAIN name (if not alrady done)
+```
+gsl new
+```
+
+Follow instructions when adding DOMAIN or see them again with
+```
+gsl help new
+gsl help install
+```
+
+## Set a DOMAIN folder for Posts (if not already done by GSL or You)
+
+- Add/Create or go into your folder of choice
+- Save into that folder a blank file named gsl.DOMAIN (gsl.example.org)
+so that GSL, knows this folder is for this DOMAIN website.
+
+## Create a new Post
+The engine is written from scratch and looks like a mix of markdown and
+ReStructuredText. It's very easy to learn and use.
+
+- Write a post in a file, using some "metas" that GSL will catch. 
+- Save your file with .gsl extension
+- Start checking it, using:
+
+```
+gsl check
+```
+
+## Convert one or all Posts
+If your Post has no error, you will have to deploy html
+files and folders. You could install nginx, or lightweight darkhttpd
+webserver on your PC to preview the website. You can also just open
+index.html in your server folder, but you won't be able to see some extra
+includes page, like Posts listing.
+
+To convert your Posts in HTML, use
+
+```
+gsl make
+```
+
+You can select a specific post, with autocompletion to check and make
+only that specified one.
+
+# Create a Templates
+------------------------------------------------------------------------
+
+You will have to create some CSS (styles.css) in your /DOMAIN/templates/
+- HOME:   ~/.config/gsl/domains/DOMAIN/templates/
+- GLOBAL: /var/lib/gsl/domains/DOMAIN/templates/
+
+# How to Write a Post
+------------------------------------------------------------------------
+
+Post has 2 sections : Before and After #1. #1 is the FIRST Title of your
+post. #(1-6) are HTML titles.
+- Before #1 is used to set METAs HEADERS to configure your Post.
+- From #1 is the CONTENT of your Post
+
+## NEEDED HEADERS (before #1)
+Register METAs for HTML Page content
+
+```
+title: POST TITLE
+slug: POST-TITLE (if space in slug GSL will convert them)
+info: DESCRIPTION (about the Post)
+author: NAME (must be registred ($ gsl author add)
+date: YYYY-MM-DD
+tags: TAG1,OTHER TAG2,TAG3 (comma separated)
+```
+
+### Admin Header
+Admin can define specific type of content. If no type defined, GSL will
+add at first line the default value: "type: post".
+
+TYPE:
+- post < classic content
+- page < used to define main index, 404, about...
+
+```
+type: TYPE
+```
+
+GSL will create html file according to slug. Do not add .html to slug.
+- post < /slug/index.html
+- page < /slug.html
+
+## Optional HEADERS (before #1)
+Register METAs for CONTENT. " : " field separator
+
+```
+abbr: SHORT : LONG
+file: NAME : FILENAME : Alt Text
+link: NAME : URL : Alt Text
+code: NBR : FILENAME : Alt Text
+image: NBR : FILENAME : ALT-TEXT
+```
+
+## CONTENT Post:
+In Content Post, markers (i.e. __My Great file) must be on the SAME line.
+For ABBRs, just write SHORT in your content
+
+```
+# Paragraphs
+At begining of new line, open with ( and close with )
+Set till 3 different classes with ( 1 ( 2 ( 3
+( 2
+This is a paragraph with class 2
+)
+
+# Register in Header. link: My Great Link : URL : Alt text
+_My Great Link
+_My Great Link+ # Open in new tab
+
+# Register in Header. file: My Great file : FILENAME : ALT-TEXT
+__My Great file
+
+# Register in Header. image: 1 : FILENAME : ALT-TEXT
+_image:1:[OPT l|r|c (left, right, center, alignment)]
+_image:1:r
+
+# Block-Code File: Register in Header. code: 1 : FILENAME : Alt Text
+_code:1
+
+# Write in STRONG
+**this strong content**
+this un**believe**able content
+this border**line** content
+
+# BOLD
+*this bold content*
+...
+
+# Write in ITALIC
+/this em text/
+
+# Inline-code (¤ = alt-gr + $ on FR keyboard)
+¤push()¤
+
+# Simple Blockquote: Use 3 "-"
+---
+(
+A simple great quote
+)
+---
+
+# Advanced Blockquote
+---
+_cite : Richard Matthew Stallman
+_link : https://stallman.org/
+_lang : en
+(
+In the free/libre software movement, we develop software that respects
+users' freedom, so we and you can escape from software that doesn't. I
+could have made money this way, and perhaps amused myself writing code.
+But I knew that at the end of my career, I would look back on years of
+building walls to divide people, and feel I had spent my life making the
+world a worse place
+)
+---
+
+# For advanced blockquotes, you can also add, if known:
+_year: 2021
+_book: Esperanza 64
+
+# Create Lists
+Use = to create an item. You can use infinite sub-items, but each Item
+of a list MUST be on the same Line
+(
+Let's start a list
+= Item 1 is *great*
+== sub-item 1 
+== sub-item 2
+=== sub-sub-item 1 of sub-item 2
+== sub-item 3
+= Item 2
+== sub-item 1 of Item 2
+This list is ended
+)
+```
+
+# HELP COMMAND
+```
+$ gsl [ARG]
+  readme                  : Show README.md instructions
+  help | -h [OPT]         : This Help
+    install               : Show process installation
+    new                   : Adding a DOMAIN
+    write | -w            : How to write a Post
+
+  new | -N                : Add and configure a new DOMAIN
+   
+  log | -L [OPTS]         : Show logs from all sessions
+    clean | -C            : Logs saved to {DATE}.gsl.log and cleaned
+    -i | -w | -e          : from levels (infos, warnings, errors)
+    -s                    : from last session only
+    [TERM]                : [TERM] : case insensitive, regex 'T1.*T2'
+                            (i.e. $ gsl log -e -s code)
+
+  author | -A [OPT]       : List authors from DOMAIN set in PWD folder
+    add                   : Add author(s) for DOMAIN
+    remove                : Remove author(s) for DOMAIN
+   
+  edit | -E [FILE]        : Open in default EDITOR [FILE] or with nano
+  db [FILE]               : Show DB statuses from [FILE]
+
+  sync [OPT]              : Sync Templates to www and wip
+    wip                   : Only to wip server (also done with make)
+    www                   : Only to www server (also done with www)
+    
+
+  check | -C [OPT] [FILE] : Check Posts errors from PWD folder or [FILE]
+    -F                    : Force check again
+    
+  make | -M [OPT] [FILE]  : Convert Posts from PWD folder or [FILE]
+                            to HTML file in server
+    -F                    : Force Make again
+    
+  post-list [OPT] [FILE]  : Add post again from [FILE] to Last-Posts List
+                            (When converting new post, it will be added)
+    Pin                   : Set Post from [FILE] to first in Last-Posts List
+    Add                   : Add Post from [FILE] to last in Last-Posts List
+  
+  www [OPT1] [OPT2]       : Add/Remove Post from www server
+    [OPT1]:
+      add                 : Add all/[FILE] to www server
+      rmove               : remove all/[FILE] from www server
+    [OPT2]:
+      all                 : Select all post with wip statuses
+      [FILE]              : Select specific post (if wip status)
+  
+  version | -v            : Show local versionn
+  -vv                     : Shown local and repo Versions
+```
diff --git a/var/lib/gsl/README.md b/var/lib/gsl/README.md
index 5d656ca..90b328c 100644
--- a/var/lib/gsl/README.md
+++ b/var/lib/gsl/README.md
@@ -1,12 +1,13 @@
 # GSL: Statique Littérateur
 ------------------------------------------------------------------------
 
-GSL is a multiple blogs/websites generator based on their domain, 
-written in bash, for minimal dependancies. The websites are nearly all
-static, except for some includes pages, like listing posts, that nginx
-can easily get, in your webserver.
+GSL est un générateur de blogs/sites-web basé sur leur nom de domaine,
+écrit en bash, afin de ne réduire ses dépendances au minimum. Les pages
+générées sont presque entièrement statiques, à l'exception du module de
+liste des derniers articles. Nginx peut être facilement configuré pour
+interprêter ce module.
 
-# Dependancies
+# Dépendances
 ------------------------------------------------------------------------
 
 - bash
@@ -17,199 +18,232 @@ can easily get, in your webserver.
 
 # GSL: Installation
 ------------------------------------------------------------------------
-In your System /
-```
-git clone URL .
-```
+Une procédure d'installation via un setup est en cours de test. Il est
+aussi possible et recommandé sous debian de l'installer grâce à son 
+paquet deb.
 
-GSL does NOT use any sudo. To avoid errors, you must give permissions
-to USER with chown -R to folders.
+Pour une installation manuelle, clonez ce dépôt, et copiez les dossiers
+déjà pré-établis dans le système. GSL n'utilise pas sudo, il vous faut
+donc donner les droits aux dossiers (chown -R) à l'utilisateur
+(sauf au dossier /usr/local/bin). Pour ce dossier, vous donnerez les droits
+via chown USER:USER /usr/local/bin/gsl
 
-## --Prefix for DOMAIN configuration (set according to user choice):
+## Configuration du DOMAIN (selon le choix de l'utilistaeur via $ gsl new) :
 - HOME:   ~/.config/gsl
 - GLOBAL: /var/lib/gsl
-- Folder: --Prefix/domains/ (created with $ gsl new)
+- Dossier: --Prefix/domains/ (créé par GSL via $ gsl new)
 
-### DOMAIN Datas from Prefix:
-- Folder: --Prefix/DOMAIN/ (Created by GSL)
-- - Files: DOMAIN.conf, authors.db (Created by GSL)
-- - Folder: --Prefix/DOMAIN/templates/ (css, logos...) (Created by GSL)
+### Données du DOMAIN :
+- Dossier: --Prefix/DOMAIN/ (créé par GSL)
+- - Fichiers: DOMAIN.conf, authors.db (créé par GSL)
+- - Dossier: --Prefix/DOMAIN/templates/ (créé par GSL - pour vos css, logos...)
 
-## Destination Folder: /etc/gsl/
-- File: gsl.conf
+## Dossier de configuration de GSL : /etc/gsl/
+- Fichier: gsl.conf
 
-## Destination Folder: /var/lib/gsl/
-- Folder: db (Created by GSL)
-- Folder: helps
-- Folder: scripts
-- File: README.md
+## Dossier principal : /var/lib/gsl/
+- Folder: db (créé par GSL)
+- Dossier: helps
+- Dossier: scripts
+- Fichier: README.md, README-english.md
 
-## Destination Folder: /var/log/gsl
-- File: gsl.log (Created and managed by GSL $ gsl log clean...)
+## Dossier des logs: /var/log/gsl/
+- Fichier: gsl.log (créé et géré par GSL via $ gsl log [OPT]...)
 
-## Destination Folder: /usr/local/bin
-- File: gsl
+## Dossier de l'éxécutable : /usr/local/bin/
+- Fichier: gsl
 
-## Destination Folder: /usr/share/bash-completion/completions/gsl
-- File: gsl
+## Dossier d'autocomplétion : /usr/share/bash-completion/completions/gsl/
+- Fichier: gsl
 
-# How to configure a DOMAIN folder, and create a Post
+# Comment configurer un domaine
 ------------------------------------------------------------------------
 
-When Adding a DOMAIN (example.com), GSL will ask you some questions.
-Datas will be used to create a DOMAIN.conf file. GSL will also ask you
-to set a folder where you will put your Posts, but you can create or add
-ones too.
+Des questions vous seront posées lorsque vous voudrez ajouter un domaine
+(exemple.com). Les données renseignées seront utilisées pour créer le
+fichier DOMAIN.conf. Une question spécifique pour les fichier des articles
+vous sera posée afin d'établir un dossier de stockage de vos articles.
+Vous pourrez en créer à loisir autant que vous voulez plus tard.
 
-## Set a DOMAIN
-- add a DOMAIN name (if not alrady done)
 ```
+# helps
+gsl help
+gsl help new
+gsl help install
+
+# Ajouter un domaine
 gsl new
 ```
 
-Follow instructions when adding DOMAIN or see them again with
+## Définir un dossier pour les articles du DOMAIN 
+Si ce n'est pas déjà fait par GSL, ou que vous voulez ajouter un dossier
+pour y stocker et convertir en HTML vos articles pour un DOMAIN prévis :
+
+- Ajouter/créer un dossier de votre choix
+- Créer un fichier vide nommé gsl.DOMAIAN (gsl.exemple.com)
+
+## Ajouter un auteur
 ```
-gsl help new
-gsl help install
+cd MON-DOSSER-ARTICLES
+gsl author add
 ```
 
-## Set a DOMAIN folder for Posts (if not already done by GSL or You)
+## Créer un article
+Le moteur de convertion est nouveau, et est un mélange entre markdown et
+reSTructuredText. Il est simple à apprendre et à utiliser.
 
-- Add/Create or go into your folder of choice
-- Save into that folder a blank file named gsl.DOMAIN (gsl.example.org)
-so that GSL, knows this folder is for this DOMAIN website.
-
-## Create a new Post
-The engine is written from scratch and looks like a mix of markdown and
-ReStructuredText. It's very easy to learn and use.
-
-- Write a post in a file, using some "metas" that GSL will catch. 
-- Save your file with .gsl extension
-- Start checking it, using:
+- Créer un fichier (monarticle).gsl (extension .gsl)
+- Suivez le guide plus bas pour comprendre les notions
 
+Vous devrez le faire valider par GSL :
 ```
 gsl check
 ```
 
-## Convert one or all Posts
-If your Post has no error, you will have to deploy html
-files and folders. You could install nginx, or lightweight darkhttpd
-webserver on your PC to preview the website. You can also just open
-index.html in your server folder, but you won't be able to see some extra
-includes page, like Posts listing.
-
-To convert your Posts in HTML, use
+## Convertir un ou tous les articles
+Si votre article n'a pas d'erreurs, vous pouvez le convertir en HTML.
 
 ```
 gsl make
 ```
 
-You can select a specific post, with autocompletion to check and make
-only that specified one.
+Votre article sera prêt dans le dossier webserver (ex: /var/www/DOMAIN/wip)
+Vous pourrez donc vérifier son rendu.
 
-# Create a Templates
+Si vous êtes satisfait, vous pouvez le déployer "officiellement" dans www
+
+```
+# Vous pouvez utiliser l'autocompletion pour les articles
+gsl www add (monarticle.gsl)
+```
+
+# Créer un Template
 ------------------------------------------------------------------------
 
-You will have to create some CSS (styles.css) in your /DOMAIN/templates/
+Vous devrez pour que votre site soit à vôtre goût créer et définir les
+styles dans styles.css. Placez ce fichier (en fonction du choix de votre
+configuration du DOMAIN) dans :
 - HOME:   ~/.config/gsl/domains/DOMAIN/templates/
 - GLOBAL: /var/lib/gsl/domains/DOMAIN/templates/
 
-# How to Write a Post
+Astuce: Une fois votre article créé, vous verrez dans sa source que
+beaucoup d'éléments ont une class="acronymechoisi_***". Utilisez ces classes.
+Pour mettre à jour et voir vos modifications
+
+```
+gsl sync
+# ou (si vous modifier le header/footer)
+gsl make -F
+```
+
+# Comment écrire un article
 ------------------------------------------------------------------------
 
-Post has 2 sections : Before and After #1. #1 is the FIRST Title of your
-post. #(1-6) are HTML titles.
-- Before #1 is used to set METAs HEADERS to configure your Post.
-- From #1 is the CONTENT of your Post
+Votre article doit contenir 2 sections. Les Metas avant #1 et 
+l'article à partir de ce repère (servant de titre h1).
+
+- METAS : configurer votre article (titre, date, liens...)
+- ARTICLE :  Contenue rédactionnel avec quelques marqueurs (gras...)
+
+## METAS obligatoires (avant #1)
 
-## NEEDED HEADERS (before #1)
-Register METAs for HTML Page content
 
 ```
 title: POST TITLE
-slug: POST-TITLE (if space in slug GSL will convert them)
-info: DESCRIPTION (about the Post)
-author: NAME (must be registred ($ gsl author add)
+slug: POST-TITLE (si espaces, GSL les convertira en -)
+info: DESCRIPTION (À propos de cet article)
+author: NAME (doit être enregistré via ($ gsl author add)
 date: YYYY-MM-DD
-tags: TAG1,OTHER TAG2,TAG3 (comma separated)
+tags: TAG1,Mon TAG2,TAG3 (séparé par une virgule)
 ```
 
-### Admin Header
-Admin can define specific type of content. If no type defined, GSL will
-add at first line the default value: "type: post".
+### Page ou Article ?
+Vous pouvez spécifiez pour chaque article si c'est une page ou un article
+Si non renseigné, GSL ajoutera le type: post (article) par défaut à la 
+première ligne de votre article
 
 TYPE:
-- post < classic content
-- page < used to define main index, 404, about...
+- post < Article
+- page < Page (créer vos pages: index, 404, about...)
 
 ```
 type: TYPE
 ```
 
-GSL will create html file according to slug. Do not add .html to slug.
-- post < /slug/index.html
-- page < /slug.html
+GSL créera vos fichier HTML selon le "slug" renseigné. Ne pas ajouter .html
+Selon le type: 
 
-## Optional HEADERS (before #1)
-Register METAs for CONTENT. " : " field separator
+- post < /POST-TITLE/index.html
+- page < /POST-TITLE.html
+
+## METAS optionnelles (avant #1)
+Définir les marqueurs (abbr:, link:...) et utilisr " : " comme séparateur
 
 ```
-abbr: SHORT : LONG
-file: NAME : FILENAME : Alt Text
-link: NAME : URL : Alt Text
-code: NBR : FILENAME : Alt Text
-image: NBR : FILENAME : ALT-TEXT
+abbr: COURT : LONG
+file: NOM : NOM-DU-FICHIER : Text alternatif
+link: NOM : URL : Text alternatif
+code: NUMERO : NOM-DU-FICHIER : Text alternatif
+image: NUMERO : NOM-DU-FICHIER : TEXT-ALTERNATIF
 ```
 
-## CONTENT Post:
-In Content Post, markers (i.e. __My Great file) must be on the SAME line.
-For ABBRs, just write SHORT in your content
+## Contenu de l'article:
+Les marqueurs (ex __Mon-super-fichier) doivent commencer et finir sur
+la même ligne. Pour les abréviations (abbr:), écrivez juste (ex: COURT).
+
 
 ```
-# Paragraphs
-At begining of new line, open with ( and close with )
-Set till 3 different classes with ( 1 ( 2 ( 3
+# Paragraphes
+Au début d'une nouvelle ligne, ouvrez avec ( et fermez avec ).
+Vous pouvez utiliser 4 classes de paragraphes différentes : ( 1 ( 2 ( 3
 ( 2
-This is a paragraph with class 2
+Paragraphe avec une classe 2 (css)
 )
 
-# Register in Header. link: My Great Link : URL : Alt text
-_My Great Link
-_My Great Link+ # Open in new tab
+# Liens
+(définir en METAS. ex: link: Mon lien : URL : Alt text)
+_Mon lien
+_Mon lien+ # Pour ouvrir dans un nouvel onglet
 
-# Register in Header. file: My Great file : FILENAME : ALT-TEXT
-__My Great file
+# Fichiers
+(définir en METAS. ex: file: Mon fichier : FILENAME : ALT-TEXT
+__Mon fichier
 
-# Register in Header. image: 1 : FILENAME : ALT-TEXT
-_image:1:[OPT l|r|c (left, right, center, alignment)]
+# Images
+(définir en METAS. ex:  image: 1 : FILENAME : ALT-TEXT
+_image:1
 _image:1:r
 
-# Block-Code File: Register in Header. code: 1 : FILENAME : Alt Text
+:[l|r|c] (gauche, droite, centre)
+
+# Block-Code depuis un fichier:
+(définir en METAS code: 1 : FILENAME : Alt Text
 _code:1
 
-# Write in STRONG
-**this strong content**
-this un**believe**able content
-this border**line** content
+# Écrire en très gras
+**c'est du surgras**
+c'est in**défini**ssable
+il ad**juge** : pas de pub !
 
-# BOLD
-*this bold content*
+# Gras
+*c'est en gras*
 ...
 
-# Write in ITALIC
-/this em text/
+# Italique
+écrire /en italique/
 
-# Inline-code (¤ = alt-gr + $ on FR keyboard)
-¤push()¤
+# Code en ligne (¤ = alt-gr + $ sur clavier FR azerty)
+¤gsl help -w¤
 
-# Simple Blockquote: Use 3 "-"
+# Citation simple
+(au début de la ligne, mettez 3x -)
 ---
 (
-A simple great quote
+Une citation simple dans un paragraphe
 )
 ---
 
-# Advanced Blockquote
+# Citation avancée
 ---
 _cite : Richard Matthew Stallman
 _link : https://stallman.org/
@@ -224,23 +258,24 @@ world a worse place
 )
 ---
 
-# For advanced blockquotes, you can also add, if known:
+# Citation avancée : optionnel
 _year: 2021
 _book: Esperanza 64
 
-# Create Lists
-Use = to create an item. You can use infinite sub-items, but each Item
-of a list MUST be on the same Line
+# Créer des listes
+(utilisez = pour définir l'arborescence). L'arborescence est "infie")
+(chaque contenu de la liste doit être sur la même ligne)
+
 (
-Let's start a list
-= Item 1 is *great*
-== sub-item 1 
-== sub-item 2
-=== sub-sub-item 1 of sub-item 2
-== sub-item 3
-= Item 2
-== sub-item 1 of Item 2
-This list is ended
+Voici une liste
+= Fruits : *mangez-en*
+== Kiwis
+== Fraises
+=== pas mûres
+== Bananes
+= Légumes
+== Épinards
+Fin de la liste
 )
 ```
 
@@ -266,7 +301,7 @@ $ gsl [ARG]
     add                   : Add author(s) for DOMAIN
     remove                : Remove author(s) for DOMAIN
    
-  edit | -E [FILE] [APP]  : Open in default EDITOR [FILE] or with APP
+  edit | -E [FILE]        : Open in default EDITOR [FILE] or with nano
   db [FILE]               : Show DB statuses from [FILE]
 
   sync [OPT]              : Sync Templates to www and wip
diff --git a/var/lib/gsl/helps/gsl_help b/var/lib/gsl/helps/gsl_help
index 04ff795..5e81793 100644
--- a/var/lib/gsl/helps/gsl_help
+++ b/var/lib/gsl/helps/gsl_help
@@ -20,7 +20,7 @@ $ gsl [ARG]
     add                   : Add author(s) for DOMAIN
     remove                : Remove author(s) for DOMAIN
    
-  edit | -E [FILE] [APP]  : Open in default EDITOR [FILE] or with APP
+  edit | -E [FILE]        : Open in default EDITOR [FILE] or with nano
   db [FILE]               : Show DB statuses from [FILE]
 
   sync [OPT]              : Sync Templates to www and wip