GNUBoot/coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
coreboot-kgpe-d16/src/soc/intel/apollolake/i2c.c

43 lines
1.2 KiB
C
Raw Normal View History

soc/intel/apollolake: Add support for LPSS I2C driver Support the I2C interfaces on this SOC using the Intel common lpss_i2c driver. The controllers are supported in pre-ram environments by setting a temporary base address in bootblock and in ramstage using the naturally enumerated base address. The base speed of this controller is 133MHz and the SCL/SDA timing values that are reported to the OS are calculated using that clock. This was tested on a google/reef board doing I2C transactions to the trackpad both in verstage and in ramstage. Change-Id: I0a9d62cd1007caa95cdf4754f30c30aaff9f78f9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15480 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-27 19:57:13 +02:00
/*
* This file is part of the coreboot project.
*
* Copyright 2016 Google Inc.
soc/intel/common/block: Move i2c common functions into block/i2c This patch cleans soc/intel/{apollolake/cannonlake/skylake} by moving common soc code into common/block/i2c. BUG=b:78109109 BRANCH=none TEST=Build and boot KBL/CNL/APL platform. Change-Id: I88f2f836eee4f80b79486dd8644d1bb3826c5af1 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26056 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-07 12:57:51 +02:00
* Copyright (C) 2018 Intel Corporation.
soc/intel/apollolake: Add support for LPSS I2C driver Support the I2C interfaces on this SOC using the Intel common lpss_i2c driver. The controllers are supported in pre-ram environments by setting a temporary base address in bootblock and in ramstage using the naturally enumerated base address. The base speed of this controller is 133MHz and the SCL/SDA timing values that are reported to the OS are calculated using that clock. This was tested on a google/reef board doing I2C transactions to the trackpad both in verstage and in ramstage. Change-Id: I0a9d62cd1007caa95cdf4754f30c30aaff9f78f9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15480 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-27 19:57:13 +02:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <device/device.h>
#include <device/pci_def.h>
ic2/designware: Move Intel i2c logic to shared driver BUG=b:70232394 BRANCH=none TEST=emerge-reef coreboot emerge-glados Change-Id: Idb453a4d2411163e6b4a8422310bf272eac5d379 Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/22822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-06 22:26:15 +01:00
#include <drivers/i2c/designware/dw_i2c.h>
soc/intel/apollolake: Add support for LPSS I2C driver Support the I2C interfaces on this SOC using the Intel common lpss_i2c driver. The controllers are supported in pre-ram environments by setting a temporary base address in bootblock and in ramstage using the naturally enumerated base address. The base speed of this controller is 133MHz and the SCL/SDA timing values that are reported to the OS are calculated using that clock. This was tested on a google/reef board doing I2C transactions to the trackpad both in verstage and in ramstage. Change-Id: I0a9d62cd1007caa95cdf4754f30c30aaff9f78f9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15480 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-27 19:57:13 +02:00
#include <soc/pci_devs.h>
intel/common/block/i2c: Add common block for I2C and use the same in SoCs In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-26 17:36:35 +02:00
/* Convert I2C bus number to PCI device and function */
drivers/i2c/designware: namespace soc functions Rename the following functions to ensure it's clear that the designware i2c host controller driver is the one that these functions are associated with: i2c_get_soc_cfg() -> dw_i2c_get_soc_cfg() i2c_get_soc_early_base() -> dw_i2c_get_soc_early_base() i2c_soc_devfn_to_bus() -> dw_i2c_soc_devfn_to_bus() i2c_soc_bus_to_devfn() -> dw_i2c_soc_bus_to_devfn() BUG=b:72121803 Change-Id: Idb7633b45a0bb7cb7433ef5f6b154e28474a7b6d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23371 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-23 04:29:25 +01:00
int dw_i2c_soc_bus_to_devfn(unsigned int bus)
soc/intel/apollolake: Add support for LPSS I2C driver Support the I2C interfaces on this SOC using the Intel common lpss_i2c driver. The controllers are supported in pre-ram environments by setting a temporary base address in bootblock and in ramstage using the naturally enumerated base address. The base speed of this controller is 133MHz and the SCL/SDA timing values that are reported to the OS are calculated using that clock. This was tested on a google/reef board doing I2C transactions to the trackpad both in verstage and in ramstage. Change-Id: I0a9d62cd1007caa95cdf4754f30c30aaff9f78f9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15480 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-27 19:57:13 +02:00
{
soc/intel/{common,apollolake}: Add checks to handle negative values Fix issues reported by coverity scan in the below files. src/soc/intel/common/block/i2c 1375440: Improper use of negative value 1375441: Improper use of negative value 1375444: Improper use of negative value src/soc/intel/apollolake/i2c.c 1375442: Unsigned compared against 0 Change-Id: Ic65400c934631e3dcd3aa664c24cb451616e7f4d Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-04 15:23:19 +02:00
if (bus <= 3)
intel/common/block/i2c: Add common block for I2C and use the same in SoCs In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-26 17:36:35 +02:00
return PCI_DEVFN(PCH_DEV_SLOT_SIO1, bus);
else if (bus >= 4 && bus <= 7)
return PCI_DEVFN(PCH_DEV_SLOT_SIO2, (bus - 4));
else
return -1;
soc/intel/apollolake: Add support for LPSS I2C driver Support the I2C interfaces on this SOC using the Intel common lpss_i2c driver. The controllers are supported in pre-ram environments by setting a temporary base address in bootblock and in ramstage using the naturally enumerated base address. The base speed of this controller is 133MHz and the SCL/SDA timing values that are reported to the OS are calculated using that clock. This was tested on a google/reef board doing I2C transactions to the trackpad both in verstage and in ramstage. Change-Id: I0a9d62cd1007caa95cdf4754f30c30aaff9f78f9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15480 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-27 19:57:13 +02:00
}
intel/common/block/i2c: Add common block for I2C and use the same in SoCs In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-26 17:36:35 +02:00
/* Convert PCI device and function to I2C bus number */
drivers/i2c/designware: namespace soc functions Rename the following functions to ensure it's clear that the designware i2c host controller driver is the one that these functions are associated with: i2c_get_soc_cfg() -> dw_i2c_get_soc_cfg() i2c_get_soc_early_base() -> dw_i2c_get_soc_early_base() i2c_soc_devfn_to_bus() -> dw_i2c_soc_devfn_to_bus() i2c_soc_bus_to_devfn() -> dw_i2c_soc_bus_to_devfn() BUG=b:72121803 Change-Id: Idb7633b45a0bb7cb7433ef5f6b154e28474a7b6d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23371 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-23 04:29:25 +01:00
int dw_i2c_soc_devfn_to_bus(unsigned int devfn)
soc/intel/apollolake: Add support for LPSS I2C driver Support the I2C interfaces on this SOC using the Intel common lpss_i2c driver. The controllers are supported in pre-ram environments by setting a temporary base address in bootblock and in ramstage using the naturally enumerated base address. The base speed of this controller is 133MHz and the SCL/SDA timing values that are reported to the OS are calculated using that clock. This was tested on a google/reef board doing I2C transactions to the trackpad both in verstage and in ramstage. Change-Id: I0a9d62cd1007caa95cdf4754f30c30aaff9f78f9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15480 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-27 19:57:13 +02:00
{
intel/common/block/i2c: Add common block for I2C and use the same in SoCs In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-26 17:36:35 +02:00
if (PCI_SLOT(devfn) == PCH_DEV_SLOT_SIO1)
return PCI_FUNC(devfn);
else if (PCI_SLOT(devfn) == PCH_DEV_SLOT_SIO2)
return PCI_FUNC(devfn) + 4;
else
return -1;
soc/intel/apollolake: Add support for LPSS I2C driver Support the I2C interfaces on this SOC using the Intel common lpss_i2c driver. The controllers are supported in pre-ram environments by setting a temporary base address in bootblock and in ramstage using the naturally enumerated base address. The base speed of this controller is 133MHz and the SCL/SDA timing values that are reported to the OS are calculated using that clock. This was tested on a google/reef board doing I2C transactions to the trackpad both in verstage and in ramstage. Change-Id: I0a9d62cd1007caa95cdf4754f30c30aaff9f78f9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15480 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-27 19:57:13 +02:00
}
Reference in a new issue Copy permalink