coreboot-kgpe-d16/payloads/libpayload/include/libpayload.h

588 lines
16 KiB
C
Raw Normal View History

/*
* This file is part of the libpayload project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/**
* @mainpage
*
* @section intro Introduction
* libpayload is a small BSD-licensed static library (a lightweight
* implementation of common and useful functions) intended to be used
* as a basis for coreboot payloads.
*
* @section example Example
* Here is an example of a very simple payload:
* @include sample/hello.c
*/
#ifndef _LIBPAYLOAD_H
#define _LIBPAYLOAD_H
#include <libpayload-config.h>
#include <compiler.h>
#include <cbgfx.h>
#include <ctype.h>
libpayload: Add a new "die" function to fatally signal programming errors. If a programming error is detected, die can be used to print a message and stop execution similar to failing an assert. There's also a "die_if" function which is conditional. die functions, like asserts, should be used to trap programming errors and not when the hardware does something wrong. If all code was written perfectly, no die function would ever be called. In other words, it would be appropriate to use die if a function was called with a value that was out of bounds or if malloc failed. It wouldn't be appropriate if an external device doesn't respond. In the future, the die family of functions might print a stack trace or show other debugging info. Old-Change-Id: I653fc8cb0b4e459522f1b86f7fac280836d57916 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/178000 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 59df109d56a0f5346562de9b3124666a4443adf0) libpayload: Fix the license in some files which were accidentally made GPL. Some files were accidentally made GPL when they were added to libpayload. This change changes them over to a BSD license to be in line with the intended license of libpayload. Old-Change-Id: Ia95ac4951b173dcb93cb489705680e7313df3c92 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/182202 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 5f47600e50e82de226f2fa6ea81d4a3d1c56277b) Squashed the initial patch for "die" functions and a later update to the license header. Change-Id: I3a62cd820e676f4458e61808733d81edd3d76e87 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6889 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-11-23 09:38:49 +01:00
#include <die.h>
libpayload: Expand setbits_le32() and fix readl() const-ness setbits_le32() is not really arch-specific... the arch-specific part of accessing memory is wrapped by readl() and writel(), and the endianness can be accounted for with the right macros. Generalize the definitions, add a be32 version and move them to endian.h so that all platforms can use them. Also include endian.h from libpayload.h so we won't update any payload's old use of the macros (endianness is something useful enough to always have avalable anyway, and shouldn't clash with other things). This also fixes a bug where these macros would only be available if libpayload-config.h had been independently included before. Also fix a bug with readl() macros on all archs where they refused to work on const pointers (which they should). CQ-DEPEND=CL:208712 BUG=None TEST=Stuff still compiles. Built and booted on Storm. Original-Change-Id: I01a7fbadbb5d740675657d95c1e969027562ba8c Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/208713 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 951f8a6d77bc21bd793bf4f228a0965ade586f00) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I51c25f01b200b91abbe32c879905349bb05dc9c8 Reviewed-on: http://review.coreboot.org/8129 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2014-07-17 19:43:15 +02:00
#include <endian.h>
#include <fmap_serialized.h>
#include <ipchksum.h>
#include <kconfig.h>
#include <stddef.h>
#include <stdio.h>
#include <stdarg.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <sys/types.h>
#include <arch/types.h>
#include <arch/io.h>
#include <arch/virtual.h>
#include <sysinfo.h>
#include <pci.h>
#include <archive.h>
Make common macros double-evaluation safe I just got hit by a double-evaluation bug again, it's time to attempt to fix this once more. Unfortunately there are several issues that don't make this easy: - bitfield variables don't support typeof() - local macro variables that shadow others trigger -Werror=shadow - sign warnings with integer literal and unsigned var in typeof-MIN() - ({ statement expressions }) can not be used outside functions - romcc doesn't support any of the fancy GCC/clang extensions This patch tries to address all of them as far as possible with macro magic. We don't have the technology to solve the bitfield and non-function context issues yet (__builtin_choose_expr() still throws a "no statement expression outside a function" error if it's only in the branch that's not chosen, unfortunately), so we'll have to provide alternative macros for use in those cases (and we'll avoid making __ALIGN_MASK() double-evaluation safe for now, since it would be annoying to do that there and having an alignment mask with side effects seems very unlikely). romcc can continue using unsafe versions since we're hopefully not writing a lot of new code for it. Sign warnings can be avoided in literal/variable comparisons by always using the type of the variable there. Shadowing is avoided by picking very explicit local variable names and using a special __COUNTER__ solution for MIN() and MAX() (the only ones of these you're likely to nest). Also add DIV_ROUND_UP() to libpayload since it's a generally quite useful thing to have. Change-Id: Iea35156c9aa9f6f2c7b8f00991418b746f44315d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-23 03:09:48 +02:00
/* Double-evaluation unsafe min/max, for bitfields and outside of functions */
#define __CMP_UNSAFE(a, b, op) ((a) op (b) ? (a) : (b))
#define MIN_UNSAFE(a, b) __CMP_UNSAFE(a, b, <)
#define MAX_UNSAFE(a, b) __CMP_UNSAFE(a, b, >)
#define __CMP_SAFE(a, b, op, var_a, var_b) ({ \
__TYPEOF_UNLESS_CONST(a, b) var_a = (a); \
__TYPEOF_UNLESS_CONST(b, a) var_b = (b); \
var_a op var_b ? var_a : var_b; \
})
#define __CMP(a, b, op) __builtin_choose_expr( \
__builtin_constant_p(a) && __builtin_constant_p(b), \
__CMP_UNSAFE(a, b, op), __CMP_SAFE(a, b, op, __TMPNAME, __TMPNAME))
#define MIN(a, b) __CMP(a, b, <)
#define MAX(a, b) __CMP(a, b, >)
#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
#define BIT(x) (1ul << (x))
Make common macros double-evaluation safe I just got hit by a double-evaluation bug again, it's time to attempt to fix this once more. Unfortunately there are several issues that don't make this easy: - bitfield variables don't support typeof() - local macro variables that shadow others trigger -Werror=shadow - sign warnings with integer literal and unsigned var in typeof-MIN() - ({ statement expressions }) can not be used outside functions - romcc doesn't support any of the fancy GCC/clang extensions This patch tries to address all of them as far as possible with macro magic. We don't have the technology to solve the bitfield and non-function context issues yet (__builtin_choose_expr() still throws a "no statement expression outside a function" error if it's only in the branch that's not chosen, unfortunately), so we'll have to provide alternative macros for use in those cases (and we'll avoid making __ALIGN_MASK() double-evaluation safe for now, since it would be annoying to do that there and having an alignment mask with side effects seems very unlikely). romcc can continue using unsafe versions since we're hopefully not writing a lot of new code for it. Sign warnings can be avoided in literal/variable comparisons by always using the type of the variable there. Shadowing is avoided by picking very explicit local variable names and using a special __COUNTER__ solution for MIN() and MAX() (the only ones of these you're likely to nest). Also add DIV_ROUND_UP() to libpayload since it's a generally quite useful thing to have. Change-Id: Iea35156c9aa9f6f2c7b8f00991418b746f44315d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-23 03:09:48 +02:00
#define DIV_ROUND_UP(x, y) ({ \
typeof(x) _div_local_x = (x); \
typeof(y) _div_local_y = (y); \
(_div_local_x + _div_local_y - 1) / _div_local_y; \
})
static inline u32 div_round_up(u32 n, u32 d) { return (n + d - 1) / d; }
#define LITTLE_ENDIAN 1234
#define BIG_ENDIAN 4321
#define EXIT_SUCCESS 0
#define EXIT_FAILURE 1
#define RAND_MAX 0x7fffffff
#define MAX_ARGC_COUNT 32
/*
* Payload information parameters - these are used to pass information
* to the entity loading the payload.
* Usage: PAYLOAD_INFO(key, value)
* Example: PAYLOAD_INFO(name, "CoreInfo!")
*/
#define _pstruct(key) __pinfo_ ##key
#define PAYLOAD_INFO(key, value) \
static const char _pstruct(key)[] \
__attribute__((__used__)) \
__attribute__((section(".note.pinfo"),unused)) = #key "=" value
/**
* @defgroup nvram NVRAM and RTC functions
* @{
*/
#define NVRAM_RTC_SECONDS 0 /**< RTC Seconds offset in CMOS */
#define NVRAM_RTC_MINUTES 2 /**< RTC Minutes offset in CMOS */
#define NVRAM_RTC_HOURS 4 /**< RTC Hours offset in CMOS */
#define NVRAM_RTC_DAY 7 /**< RTC Days offset in CMOS */
#define NVRAM_RTC_MONTH 8 /**< RTC Month offset in CMOS */
#define NVRAM_RTC_YEAR 9 /**< RTC Year offset in CMOS */
#define NVRAM_RTC_FREQ_SELECT 10 /**< RTC Update Status Register */
#define NVRAM_RTC_UIP 0x80
#define NVRAM_RTC_STATUSB 11 /**< RTC Status Register B */
#define NVRAM_RTC_FORMAT_24HOUR 0x02
#define NVRAM_RTC_FORMAT_BINARY 0x04
/** Broken down time structure */
struct tm {
int tm_sec; /**< Number of seconds after the minute */
int tm_min; /**< Number of minutes after the hour */
int tm_hour; /**< Number of hours past midnight */
int tm_mday; /**< The day of the month */
int tm_mon; /**< The month of the year */
int tm_year; /**< The number of years since 1900 */
int tm_wday; /**< The day of the week */
int tm_yday; /**< The number of days since January 1 */
int tm_isdst; /**< A flag indicating daylight savings time */
};
u8 nvram_read(u8 addr);
void nvram_write(u8 val, u8 addr);
int nvram_updating(void);
void rtc_read_clock(struct tm *tm);
/** @} */
/**
* @defgroup storage driver functions
* @{
*/
void storage_initialize(void);
/** @} */
/**
* @defgroup usb USB functions
* @{
*/
int usb_initialize(void);
int usb_exit (void);
int usbhid_havechar(void);
int usbhid_getchar(void);
int usbhid_getmodifiers(void);
/** @} */
/**
* @defgroup input Device functions
* @{ @}
*/
extern void (*reset_handler)(void);
int add_reset_handler(void (*new_handler)(void));
/**
* @defgroup keyboard Keyboard functions
* @ingroup input
* @{
*/
void keyboard_init(void);
void keyboard_disconnect(void);
int keyboard_havechar(void);
unsigned char keyboard_get_scancode(void);
int keyboard_getchar(void);
int keyboard_set_layout(char *country);
int keyboard_getmodifier(void);
void initialize_keyboard_media_key_mapping_callback(int (*media_key_mapper)(char));
enum KEYBOARD_MODIFIERS {
KB_MOD_SHIFT = (1 << 0),
KB_MOD_ALT = (1 << 1),
KB_MOD_CTRL = (1 << 2),
KB_MOD_CAPSLOCK = (1 << 3),
};
/** @} */
/**
* @defgroup mouse Mouse cursor functions
* @ingroup input
* @{
*/
void mouse_cursor_poll(void);
void mouse_cursor_get_rel(int *x, int *y, int *z);
u32 mouse_cursor_get_buttons(void);
void mouse_cursor_set_speed(u32 val);
u32 mouse_cursor_get_speed(void);
void mouse_cursor_set_acceleration(u8 val);
u8 mouse_cursor_get_acceleration(void);
/** @} */
/**
* @defgroup i8042 controller functions
* @ingroup input
* @{
*/
size_t i8042_has_ps2(void);
size_t i8042_has_aux(void);
u8 i8042_probe(void);
void i8042_close(void);
int i8042_cmd(u8 cmd);
void i8042_write_data(u8 data);
u8 i8042_data_ready_ps2(void);
u8 i8042_data_ready_aux(void);
u8 i8042_read_data_ps2(void);
u8 i8042_read_data_aux(void);
int i8042_wait_read_ps2(void);
int i8042_wait_read_aux(void);
/** @} */
/**
* @defgroup i8042 PS2 Mouse functions
* @ingroup input
* @{
*/
void i8042_mouse_init(void);
void i8042_mouse_disconnect(void);
/** @} */
/**
* @defgroup serial Serial functions
* @ingroup input
* @{
*/
void serial_init(void);
void serial_console_init(void);
void serial_putchar(unsigned int c);
int serial_havechar(void);
int serial_getchar(void);
void serial_clear(void);
void serial_start_bold(void);
void serial_end_bold(void);
void serial_start_reverse(void);
void serial_end_reverse(void);
void serial_start_altcharset(void);
void serial_end_altcharset(void);
void serial_set_color(short fg, short bg);
void serial_cursor_enable(int state);
void serial_set_cursor(int y, int x);
/** @} */
/**
* @defgroup speaker Speaker functions
* @ingroup input
* @{
*/
void speaker_enable(u16 freq);
void speaker_disable(void);
void speaker_tone(u16 freq, unsigned int duration);
/** @} */
/**
* @defgroup video Video functions
* @ingroup input
* @{
*/
int video_init(void);
int video_console_init(void);
void video_get_rows_cols(unsigned int *rows, unsigned int *cols);
void video_console_putchar(unsigned int ch);
void video_console_putc(u8 row, u8 col, unsigned int ch);
void video_console_clear(void);
void video_console_cursor_enable(int state);
void video_console_get_cursor(unsigned int *x, unsigned int *y, unsigned int *en);
void video_console_set_cursor(unsigned int cursorx, unsigned int cursory);
/*
* print characters on video console with colors. note that there is a size
* restriction for the internal buffer. so, output string can be truncated.
*/
enum video_printf_align {
VIDEO_PRINTF_ALIGN_KEEP = 0,
VIDEO_PRINTF_ALIGN_LEFT,
VIDEO_PRINTF_ALIGN_CENTER,
VIDEO_PRINTF_ALIGN_RIGHT,
};
void video_printf(int foreground, int background, enum video_printf_align align,
const char *fmt, ...);
/** @} */
/**
* @defgroup cbmem_console CBMEM memory console.
* @ingroup input
* @{
*/
void cbmem_console_init(void);
libpayload: console: Allow output drivers to print whole strings at once The console output driver framework in libpayload is currently built on the putchar primitive, meaning that every driver's function gets called one character at a time. This becomes an issue when we add drivers that could output multiple characters at a time, but have a high constant overhead per invocation (such as the planned GDB stub, which needs to wrap a special frame around output strings and wait for an acknowledgement from the server). This patch adds a new 'write' function pointer to the console_output_driver structure as an alternative to 'putchar'. Output drivers need to provide at least one of the two ('write' is preferred if available). The CBMEM console driver is ported as a proof of concept (since it's our most performace-critical driver and should in theory benefit the most from less function pointer invocations, although it's probably still negligible compared to the big sprawling mess that is printf()). Even with this fix, the problem remains that printf() was written with the putchar primitive in mind. Even though normal text already contains an optimization to allow multiple characters at a time, almost all formatting directives cause their output (including things like padding whitespace) to be putchar()ed one character at a time. Therefore, this patch reworks parts of the output code (especially number printing) to all but remove that inefficiency (directives still invoke an extra write() call, but at least not one per character). Since I'm touching printf() core code anyway, I also tried to salvage what I could from that weird, broken "return negative on error" code path (not that any of our current output drivers can trigger it anyway). A final consequence of this patch is that the responsibility to prepend line feeds with carriage returns is moved into the output driver implementations. Doing this only makes sense for drivers with explicit cursor position control (i.e. serial or video), and things like the CBMEM console that appears like a normal file to the system really have no business containing carriage returns (we don't want people to accidentally associate us with Windows, now, do we?). BUG=chrome-os-partner:18390 TEST=Made sure video and CBMEM console still look good, tried printf() with as many weird edge-case strings as I could find and compared serial output as well as sprintf() return value. Original-Change-Id: Ie05ae489332a0103461620f5348774b6d4afd91a Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196384 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit ab1ef0c07736fe1aa3e0baaf02d258731e6856c0) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I78f5aedf6d0c3665924995cdab691ee0162de404 Reviewed-on: http://review.coreboot.org/7880 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-04-18 05:00:20 +02:00
void cbmem_console_write(const void *buffer, size_t count);
/**
* Take a snapshot of the CBMEM memory console. This function will allocate a
* range of memory. Callers must free the returned buffer by themselves.
*
* @return The allocated buffer on success, NULL on failure.
*/
char *cbmem_console_snapshot(void);
/** @} */
/* drivers/option.c */
struct nvram_accessor {
u8 (*read)(u8 reg);
void (*write)(u8 val, u8 reg);
};
extern u8 *mem_accessor_base;
extern struct nvram_accessor *use_nvram, *use_mem;
struct cb_cmos_option_table *get_system_option_table(void);
int options_checksum_valid(const struct nvram_accessor *nvram);
void fix_options_checksum_with(const struct nvram_accessor *nvram);
void fix_options_checksum(void);
struct cb_cmos_entries *first_cmos_entry(struct cb_cmos_option_table *option_table);
struct cb_cmos_entries *next_cmos_entry(struct cb_cmos_entries *cur);
struct cb_cmos_enums *first_cmos_enum(struct cb_cmos_option_table *option_table);
struct cb_cmos_enums *next_cmos_enum(struct cb_cmos_enums *cmos_enum);
struct cb_cmos_enums *first_cmos_enum_of_id(struct cb_cmos_option_table *option_table, int id);
struct cb_cmos_enums *next_cmos_enum_of_id(struct cb_cmos_enums *cmos_enum, int id);
int get_option_with(const struct nvram_accessor *nvram, struct cb_cmos_option_table *option_table, void *dest, const char *name);
int get_option_from(struct cb_cmos_option_table *option_table, void *dest, const char *name);
int get_option(void *dest, const char *name);
int set_option_with(const struct nvram_accessor *nvram, struct cb_cmos_option_table *option_table, const void *value, const char *name);
int set_option(const void *value, const char *name);
int get_option_as_string(const struct nvram_accessor *nvram, struct cb_cmos_option_table *option_table, char **dest, const char *name);
int set_option_from_string(const struct nvram_accessor *nvram, struct cb_cmos_option_table *option_table, const char *value, const char *name);
/**
* @defgroup console Console functions
* @{
*/
typedef enum {
CONSOLE_INPUT_TYPE_UNKNOWN = 0,
CONSOLE_INPUT_TYPE_USB,
CONSOLE_INPUT_TYPE_EC,
CONSOLE_INPUT_TYPE_UART,
CONSOLE_INPUT_TYPE_GPIO,
} console_input_type;
void console_init(void);
libpayload: console: Allow output drivers to print whole strings at once The console output driver framework in libpayload is currently built on the putchar primitive, meaning that every driver's function gets called one character at a time. This becomes an issue when we add drivers that could output multiple characters at a time, but have a high constant overhead per invocation (such as the planned GDB stub, which needs to wrap a special frame around output strings and wait for an acknowledgement from the server). This patch adds a new 'write' function pointer to the console_output_driver structure as an alternative to 'putchar'. Output drivers need to provide at least one of the two ('write' is preferred if available). The CBMEM console driver is ported as a proof of concept (since it's our most performace-critical driver and should in theory benefit the most from less function pointer invocations, although it's probably still negligible compared to the big sprawling mess that is printf()). Even with this fix, the problem remains that printf() was written with the putchar primitive in mind. Even though normal text already contains an optimization to allow multiple characters at a time, almost all formatting directives cause their output (including things like padding whitespace) to be putchar()ed one character at a time. Therefore, this patch reworks parts of the output code (especially number printing) to all but remove that inefficiency (directives still invoke an extra write() call, but at least not one per character). Since I'm touching printf() core code anyway, I also tried to salvage what I could from that weird, broken "return negative on error" code path (not that any of our current output drivers can trigger it anyway). A final consequence of this patch is that the responsibility to prepend line feeds with carriage returns is moved into the output driver implementations. Doing this only makes sense for drivers with explicit cursor position control (i.e. serial or video), and things like the CBMEM console that appears like a normal file to the system really have no business containing carriage returns (we don't want people to accidentally associate us with Windows, now, do we?). BUG=chrome-os-partner:18390 TEST=Made sure video and CBMEM console still look good, tried printf() with as many weird edge-case strings as I could find and compared serial output as well as sprintf() return value. Original-Change-Id: Ie05ae489332a0103461620f5348774b6d4afd91a Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196384 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit ab1ef0c07736fe1aa3e0baaf02d258731e6856c0) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I78f5aedf6d0c3665924995cdab691ee0162de404 Reviewed-on: http://review.coreboot.org/7880 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-04-18 05:00:20 +02:00
void console_write(const void *buffer, size_t count);
int putchar(unsigned int c);
int puts(const char *s);
int havekey(void);
int getchar(void);
int getchar_timeout(int *ms);
console_input_type last_key_input_type(void);
extern int last_putchar;
struct console_input_driver;
struct console_input_driver {
struct console_input_driver *next;
int (*havekey) (void);
int (*getchar) (void);
console_input_type input_type;
};
struct console_output_driver;
struct console_output_driver {
struct console_output_driver *next;
void (*putchar) (unsigned int);
libpayload: console: Allow output drivers to print whole strings at once The console output driver framework in libpayload is currently built on the putchar primitive, meaning that every driver's function gets called one character at a time. This becomes an issue when we add drivers that could output multiple characters at a time, but have a high constant overhead per invocation (such as the planned GDB stub, which needs to wrap a special frame around output strings and wait for an acknowledgement from the server). This patch adds a new 'write' function pointer to the console_output_driver structure as an alternative to 'putchar'. Output drivers need to provide at least one of the two ('write' is preferred if available). The CBMEM console driver is ported as a proof of concept (since it's our most performace-critical driver and should in theory benefit the most from less function pointer invocations, although it's probably still negligible compared to the big sprawling mess that is printf()). Even with this fix, the problem remains that printf() was written with the putchar primitive in mind. Even though normal text already contains an optimization to allow multiple characters at a time, almost all formatting directives cause their output (including things like padding whitespace) to be putchar()ed one character at a time. Therefore, this patch reworks parts of the output code (especially number printing) to all but remove that inefficiency (directives still invoke an extra write() call, but at least not one per character). Since I'm touching printf() core code anyway, I also tried to salvage what I could from that weird, broken "return negative on error" code path (not that any of our current output drivers can trigger it anyway). A final consequence of this patch is that the responsibility to prepend line feeds with carriage returns is moved into the output driver implementations. Doing this only makes sense for drivers with explicit cursor position control (i.e. serial or video), and things like the CBMEM console that appears like a normal file to the system really have no business containing carriage returns (we don't want people to accidentally associate us with Windows, now, do we?). BUG=chrome-os-partner:18390 TEST=Made sure video and CBMEM console still look good, tried printf() with as many weird edge-case strings as I could find and compared serial output as well as sprintf() return value. Original-Change-Id: Ie05ae489332a0103461620f5348774b6d4afd91a Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196384 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit ab1ef0c07736fe1aa3e0baaf02d258731e6856c0) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I78f5aedf6d0c3665924995cdab691ee0162de404 Reviewed-on: http://review.coreboot.org/7880 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-04-18 05:00:20 +02:00
void (*write) (const void *, size_t);
};
void console_add_output_driver(struct console_output_driver *out);
void console_add_input_driver(struct console_input_driver *in);
int console_remove_output_driver(void *function);
#define havechar havekey
/** @} */
/**
* @defgroup mouse_cursor Mouse cursor functions
* @{
*/
typedef enum {
CURSOR_INPUT_TYPE_UNKNOWN = 0,
CURSOR_INPUT_TYPE_USB,
CURSOR_INPUT_TYPE_PS2,
} cursor_input_type;
void mouse_cursor_init(void);
struct mouse_cursor_input_driver;
struct mouse_cursor_input_driver {
struct mouse_cursor_input_driver *next;
/* X,Y,Z axis and buttons */
void (*get_state)(int *, int *, int *, u32 *);
cursor_input_type input_type;
};
void mouse_cursor_add_input_driver(struct mouse_cursor_input_driver *in);
/** @} */
/**
* @defgroup exec Execution functions
* @{
*/
int exec(long addr, int argc, char **argv);
/** @} */
/**
* @defgroup misc Misc functions
* @{
*/
int bcd2dec(int b);
int dec2bcd(int d);
int abs(int j);
long int labs(long int j);
long long int llabs(long long int j);
u8 bin2hex(u8 b);
u8 hex2bin(u8 h);
void hexdump(const void *memory, size_t length);
void fatal(const char *msg) __attribute__((noreturn));
lib: Unify log2() and related functions This patch adds a few bit counting functions that are commonly needed for certain register calculations. We previously had a log2() implementation already, but it was awkwardly split between some C code that's only available in ramstage and an optimized x86-specific implementation in pre-RAM that prevented other archs from pulling it into earlier stages. Using __builtin_clz() as the baseline allows GCC to inline optimized assembly for most archs (including CLZ on ARM/ARM64 and BSR on x86), and to perform constant-folding if possible. What was previously named log2f on pre-RAM x86 is now ffs, since that's the standard name for that operation and I honestly don't have the slightest idea how it could've ever ended up being called log2f (which in POSIX is 'binary(2) LOGarithm with Float result, whereas the Find First Set operation has no direct correlation to logarithms that I know of). Make ffs result 0-based instead of the POSIX standard's 1-based since that is consistent with clz, log2 and the former log2f, and generally closer to what you want for most applications (a value that can directly be used as a shift to reach the found bit). Call it __ffs() instead of ffs() to avoid problems when importing code, since that's what Linux uses for the 0-based operation. CQ-DEPEND=CL:273023 BRANCH=None BUG=None TEST=Built on Big, Falco, Jerry, Oak and Urara. Compared old and new log2() and __ffs() results on Falco for a bunch of test values. Change-Id: I599209b342059e17b3130621edb6b6bbeae26876 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3701a16ae944ecff9c54fa9a50d28015690fcb2f Original-Change-Id: I60f7cf893792508188fa04d088401a8bca4b4af6 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/273008 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10394 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-23 01:26:40 +02:00
/* Count Leading Zeroes: clz(0) == 32, clz(0xf) == 28, clz(1 << 31) == 0 */
static inline int clz(u32 x)
{
return x ? __builtin_clz(x) : (int)sizeof(x) * 8;
}
lib: Unify log2() and related functions This patch adds a few bit counting functions that are commonly needed for certain register calculations. We previously had a log2() implementation already, but it was awkwardly split between some C code that's only available in ramstage and an optimized x86-specific implementation in pre-RAM that prevented other archs from pulling it into earlier stages. Using __builtin_clz() as the baseline allows GCC to inline optimized assembly for most archs (including CLZ on ARM/ARM64 and BSR on x86), and to perform constant-folding if possible. What was previously named log2f on pre-RAM x86 is now ffs, since that's the standard name for that operation and I honestly don't have the slightest idea how it could've ever ended up being called log2f (which in POSIX is 'binary(2) LOGarithm with Float result, whereas the Find First Set operation has no direct correlation to logarithms that I know of). Make ffs result 0-based instead of the POSIX standard's 1-based since that is consistent with clz, log2 and the former log2f, and generally closer to what you want for most applications (a value that can directly be used as a shift to reach the found bit). Call it __ffs() instead of ffs() to avoid problems when importing code, since that's what Linux uses for the 0-based operation. CQ-DEPEND=CL:273023 BRANCH=None BUG=None TEST=Built on Big, Falco, Jerry, Oak and Urara. Compared old and new log2() and __ffs() results on Falco for a bunch of test values. Change-Id: I599209b342059e17b3130621edb6b6bbeae26876 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3701a16ae944ecff9c54fa9a50d28015690fcb2f Original-Change-Id: I60f7cf893792508188fa04d088401a8bca4b4af6 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/273008 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10394 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-23 01:26:40 +02:00
/* Integer binary logarithm (rounding down): log2(0) == -1, log2(5) == 2 */
static inline int log2(u32 x) { return (int)sizeof(x) * 8 - clz(x) - 1; }
lib: Unify log2() and related functions This patch adds a few bit counting functions that are commonly needed for certain register calculations. We previously had a log2() implementation already, but it was awkwardly split between some C code that's only available in ramstage and an optimized x86-specific implementation in pre-RAM that prevented other archs from pulling it into earlier stages. Using __builtin_clz() as the baseline allows GCC to inline optimized assembly for most archs (including CLZ on ARM/ARM64 and BSR on x86), and to perform constant-folding if possible. What was previously named log2f on pre-RAM x86 is now ffs, since that's the standard name for that operation and I honestly don't have the slightest idea how it could've ever ended up being called log2f (which in POSIX is 'binary(2) LOGarithm with Float result, whereas the Find First Set operation has no direct correlation to logarithms that I know of). Make ffs result 0-based instead of the POSIX standard's 1-based since that is consistent with clz, log2 and the former log2f, and generally closer to what you want for most applications (a value that can directly be used as a shift to reach the found bit). Call it __ffs() instead of ffs() to avoid problems when importing code, since that's what Linux uses for the 0-based operation. CQ-DEPEND=CL:273023 BRANCH=None BUG=None TEST=Built on Big, Falco, Jerry, Oak and Urara. Compared old and new log2() and __ffs() results on Falco for a bunch of test values. Change-Id: I599209b342059e17b3130621edb6b6bbeae26876 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3701a16ae944ecff9c54fa9a50d28015690fcb2f Original-Change-Id: I60f7cf893792508188fa04d088401a8bca4b4af6 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/273008 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10394 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-23 01:26:40 +02:00
/* Find First Set: __ffs(0xf) == 0, __ffs(0) == -1, __ffs(1 << 31) == 31 */
static inline int __ffs(u32 x) { return log2(x & (u32)(-(s32)x)); }
/** @} */
/**
* @defgroup mmio MMIO helper functions
* @{
*/
#if !CONFIG(LP_ARCH_MIPS)
void buffer_from_fifo32(void *buffer, size_t size, void *fifo,
int fifo_stride, int fifo_width);
void buffer_to_fifo32_prefix(void *buffer, u32 prefix, int prefsz, size_t size,
void *fifo, int fifo_stride, int fifo_width);
static inline void buffer_to_fifo32(void *buffer, size_t size, void *fifo,
int fifo_stride, int fifo_width)
{
buffer_to_fifo32_prefix(buffer, 0, 0, size, fifo,
fifo_stride, fifo_width);
}
#endif
/** @} */
/**
* @defgroup hash Hashing functions
* @{
*/
#define SHA1_BLOCK_LENGTH 64
#define SHA1_DIGEST_LENGTH 20
typedef struct {
u32 state[5];
u64 count;
u8 buffer[SHA1_BLOCK_LENGTH];
} SHA1_CTX;
void SHA1Init(SHA1_CTX *context);
void SHA1Transform(u32 state[5], const u8 buffer[SHA1_BLOCK_LENGTH]);
void SHA1Update(SHA1_CTX *context, const u8 *data, size_t len);
void SHA1Pad(SHA1_CTX *context);
void SHA1Final(u8 digest[SHA1_DIGEST_LENGTH], SHA1_CTX *context);
u8 *sha1(const u8 *data, size_t len, u8 *buf);
/** @} */
/**
* @defgroup info System information functions
* This module contains functions that return information about the system
* @{
*/
int sysinfo_have_multiboot(unsigned long *addr);
/** @} */
/**
* @defgroup arch Architecture specific functions
* This module contains global architecture specific functions.
* All architectures are expected to define these functions.
* @{
*/
int get_coreboot_info(struct sysinfo_t *info);
int get_multiboot_info(struct sysinfo_t *info);
void *get_cb_header_ptr(void);
int lib_get_sysinfo(void);
void lib_sysinfo_get_memranges(struct memrange **ranges,
uint64_t *nranges);
/* Timer functions. */
/* Defined by each architecture. */
unsigned int get_cpu_speed(void);
uint64_t timer_hz(void);
uint64_t timer_raw_value(void);
uint64_t timer_us(uint64_t base);
void arch_ndelay(uint64_t n);
/* Generic. */
/**
* Delay for a specified number of nanoseconds.
*
* @param ns Number of nanoseconds to delay for.
*/
static inline void ndelay(unsigned int ns)
{
arch_ndelay((uint64_t)ns);
}
/**
* Delay for a specified number of microseconds.
*
* @param us Number of microseconds to delay for.
*/
static inline void udelay(unsigned int us)
{
arch_ndelay((uint64_t)us * NSECS_PER_USEC);
}
/**
* Delay for a specified number of milliseconds.
*
* @param ms Number of milliseconds to delay for.
*/
static inline void mdelay(unsigned int ms)
{
arch_ndelay((uint64_t)ms * NSECS_PER_MSEC);
}
/**
* Delay for a specified number of seconds.
*
* @param s Number of seconds to delay for.
*/
static inline void delay(unsigned int s)
{
arch_ndelay((uint64_t)s * NSECS_PER_SEC);
}
/**
* @defgroup readline Readline functions
* This interface provides a simple implementation of the standard readline()
* and getline() functions. They read a line of input from the console.
* @{
*/
char *readline(const char *prompt);
int getline(char *buffer, int len);
/** @} */
/* Defined in arch/${ARCH}/selfboot.c */
void selfboot(void *entry);
/* look for area "name" in "fmap", setting offset and size to describe it.
Returns 0 on success, < 0 on error. */
int fmap_region_by_name(const uint32_t fmap_offset, const char * const name,
uint32_t * const offset, uint32_t * const size);
#endif