GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
coreboot-kgpe-d16/configs/config.msi_ms7d25_ddr5

22 lines
682 B
Plaintext
Raw Normal View History

mainboard/msi/ms7d25: Add early support for MSI PRO Z690-A DDR4 WIFI Initial mainboard code MSI PRO Z690-A DDR4 WIFI. The platform boots up up to romstage where it returns from FSP memory init with an error. What works: - open-source CAR setup - NCT6687D serial port with TX pin exposed on JBD1 header - SMBus reading SPD from all 4 DIMMs This board will serve as a reference board for enabling Alder Lake-S support in coreboot. More code and functionalities will be added in subsequent patches as src/soc/alderlake code will be improved for PCH-S. TEST=Extract the microcode from vendor firmware and include it in the build. The platform should print the console on the serial port even without FSP blob. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I5df69822dbb3ff79e087408a0693de37df2142e8 Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com> Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2022-04-07 15:16:46 +02:00
CONFIG_VENDOR_MSI=y
CONFIG_CBFS_SIZE=0x1000000
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
payloads/tianocore: Rename TianoCore to edk2 coreboot uses TianoCore interchangeably with EDK II, and whilst the meaning is generally clear, it's not the payload it uses. EDK II is commonly written as edk2. coreboot builds edk2 directly from the edk2 repository. Whilst it can build some components from edk2-platforms, the target is still edk2. [1] tianocore.org - "Welcome to TianoCore, the community supporting" [2] tianocore.org - "EDK II is a modern, feature-rich, cross-platform firmware development environment for the UEFI and UEFI Platform Initialization (PI) specifications." Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I4de125d92ae38ff8dfd0c4c06806c2d2921945ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/65820 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-13 11:11:44 +02:00
CONFIG_EDK2_BOOT_TIMEOUT=3
mb/msi/ms7d25: Add support for DDR5 variant The DDR5 board is almost identical to the DDR4 one. The only major difference is the board's DDR5 memory design. TEST=Boot MSI PRO Z690-A board successfully to Ubuntu 22.04. Memory: Crucial CT8G48C40U5.M4A1 in all 4 slots. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I652a879d1616df4708fe4690797ad98384897f53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2022-10-15 12:38:35 +02:00
CONFIG_BOARD_MSI_Z690_A_PRO_WIFI_DDR5=y
mb/msi/ms7d25: Configure PCIe Root Ports Add the full PCIe root port configuration. Proper initialization of the root ports depends on the correct GPIO programming including virtual wires. Do not program the CLKREQ signals in coreboot to let FSP detect and configure CLKREQ pads. Otherwise the CLKREQ pads are reprogrammed by FSP despite having GpioOverride=1. The pads that should not be touched by coreboot are left commented in the board GPIO file. CLKREQ reprogramming caused undefined behavior when ASPM and Clock PM was being enabled by coreboot on PCIe endpoints of CPU PCIe x4 slot (coreboot printed a lot of exceptions and simply halted). TEST=Boot the MSI PRO Z690-A DDR4 WiFi with all PCIe/M.2 slots populated and check if they are detected and functional in Linux. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I50199d2caf54509a72c5100acb770bf766327e7f Reviewed-on: https://review.coreboot.org/c/coreboot/+/63656 Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-15 18:19:19 +02:00
CONFIG_POWER_STATE_OFF_AFTER_FAILURE=y
CONFIG_PCIEXP_HOTPLUG=y
CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM_BELOW_4G=y
mainboard/msi/ms7d25: Add early support for MSI PRO Z690-A DDR4 WIFI Initial mainboard code MSI PRO Z690-A DDR4 WIFI. The platform boots up up to romstage where it returns from FSP memory init with an error. What works: - open-source CAR setup - NCT6687D serial port with TX pin exposed on JBD1 header - SMBus reading SPD from all 4 DIMMs This board will serve as a reference board for enabling Alder Lake-S support in coreboot. More code and functionalities will be added in subsequent patches as src/soc/alderlake code will be improved for PCH-S. TEST=Extract the microcode from vendor firmware and include it in the build. The platform should print the console on the serial port even without FSP blob. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I5df69822dbb3ff79e087408a0693de37df2142e8 Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com> Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2022-04-07 15:16:46 +02:00
CONFIG_DEFAULT_CONSOLE_LOGLEVEL_0=y
CONFIG_POST_DEVICE_PCI_PCIE=y
CONFIG_POST_IO_PORT=0x80
payloads/tianocore: Rename TianoCore to edk2 coreboot uses TianoCore interchangeably with EDK II, and whilst the meaning is generally clear, it's not the payload it uses. EDK II is commonly written as edk2. coreboot builds edk2 directly from the edk2 repository. Whilst it can build some components from edk2-platforms, the target is still edk2. [1] tianocore.org - "Welcome to TianoCore, the community supporting" [2] tianocore.org - "EDK II is a modern, feature-rich, cross-platform firmware development environment for the UEFI and UEFI Platform Initialization (PI) specifications." Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I4de125d92ae38ff8dfd0c4c06806c2d2921945ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/65820 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-13 11:11:44 +02:00
CONFIG_PAYLOAD_EDK2=y
CONFIG_EDK2_REPOSITORY="https://github.com/Dasharo/edk2.git"
CONFIG_EDK2_TAG_OR_REV="origin/dasharo"
CONFIG_EDK2_CBMEM_LOGGING=y
CONFIG_EDK2_FOLLOW_BGRT_SPEC=y
CONFIG_EDK2_SD_MMC_TIMEOUT=1000
mainboard/msi/ms7d25: Enable PTT Original firmware ships with PTT enabled by default on poweron. PTT takes priority over SPI/LPC TPM so enable the CRB interface until coreboot implements a way to select the interface and adapt the API to handle any TPM detection. TEST=Boot the board and see PTT is detected by Windows and Linux Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I74dc2c4245388a9f134b27e313ef26124b952594 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63834 Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-23 00:22:20 +02:00
CONFIG_TPM2=y
CONFIG_TPM_MEASURED_BOOT=y
configs/config.msi_ms7d25: Enable CBFS serial and UUID as default There is no option to calculate or generate the serial number and UUID on this platform. Enable CBFS UUID and serial by default so anybody can easily populate the missing fields. TEST=Add UUID and serial CBFS files, boot the platform and see both UUID and serial number are populated correctly. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ic8af889f12617d4ab6a27c6f336276c04f26244c Reviewed-on: https://review.coreboot.org/c/coreboot/+/64640 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-24 14:29:57 +02:00
CONFIG_DRIVERS_GENERIC_CBFS_SERIAL=y
CONFIG_DRIVERS_GENERIC_CBFS_UUID=y