coreboot-kgpe-d16/src/mainboard/winent/pl6064/Kconfig

if BOARD_WINENT_PL6064

config BOARD_SPECIFIC_OPTIONS # dummy
	def_bool y
	select CPU_AMD_GEODE_LX
	select NORTHBRIDGE_AMD_LX
	select SOUTHBRIDGE_AMD_CS5536
	select SUPERIO_WINBOND_W83627HF
	select HAVE_PIRQ_TABLE
	select PIRQ_ROUTE
	select UDELAY_TSC
	select BOARD_ROMSIZE_KB_512
	select POWER_BUTTON_FORCE_ENABLE

config MAINBOARD_DIR
	string
	default winent/pl6064

config MAINBOARD_PART_NUMBER
	string
	default "PL6064"

config IRQ_SLOT_COUNT
	int
	default 7

endif # BOARD_WINENT_PL6064
Restructured all vendors' Kconfig files to no longer source the boards' Kconfigs from within the choice/endchoice block. This makes it possible to define user visible board specific options. Moved all vendor names and PCI ids to the vendors' Kconfigs. Now all options in each file depend on the same symbol, so replaced all "depends on"s with a single "if". Sorted boards (sort -d), cleaned whitespace. This patch also introduces a dummy option BOARD_SPECIFIC_OPTIONS, which is always "y" and never used. It it simply needed to have something to attach the boards' "select" statements to. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5754 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 2010-08-30 18:36:51 +02:00			`if BOARD_WINENT_PL6064`

			`config BOARD_SPECIFIC_OPTIONS # dummy`
			`def_bool y`
AMD Geode cpus: apply un-written naming rules Kconfig directives to select chip drivers for compile literally match the chip directory names capitalized and underscored. Rename directories and Kconfig as follows: model_lx -> geode_lx model_gx1 -> geode_gx1 model_gx2 -> geode_gx2 Change-Id: Ib8bf1e758b88f9efed1cf8b11c76b796388e7147 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/613 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> 2012-02-09 15:07:41 +01:00			`select CPU_AMD_GEODE_LX`
Add Win Enterprises' PL6064 board Signed-off-by: Anish K. Patel <anishp@win-ent.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5158 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 2010-02-24 17:36:56 +01:00			`select NORTHBRIDGE_AMD_LX`
			`select SOUTHBRIDGE_AMD_CS5536`
			`select SUPERIO_WINBOND_W83627HF`
			`select HAVE_PIRQ_TABLE`
			`select PIRQ_ROUTE`
			`select UDELAY_TSC`
			`select BOARD_ROMSIZE_KB_512`
Enable or disable the power button in Kconfig Some mainboards need to disable the power button to avoid turning off right after being turned on, while other boards ship with a jumper over the power button and should allow the user to configure the behavior. This adds infrastructure in the form of four mutually exclusive options which can be selected in a mainboard Kconfig (power button forced on/off, and user-controllable with default on/off) and one result bool which source code can test. (Enable the button or not.) The options have been implemented in CS5536 code and for all mainboards which select SOUTHBRIDGE_AMD_CS5536, but should be used also by other chipsets where applicable. Note that if chipset code uses the result bool ENABLE_POWER_BUTTON, then every board using that chipset must select one out of the four control options in order to build. All touched boards should have unchanged behavior, except pcengines/alix1c, traverse/geos and lippert/hurricane-lx where the power button can now be configured by the user. Build tested for alix1c, alix2d, hurricane-lx and wyse-s50. Confirmed to work as advertised on alix1c both with button enabled and disabled. Includes additional traverse/geos changes from Nathan and lippert/hurricane-lx changes from Jens to correctly use the new feature on those boards. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Aurelien Guillaume <aurelien@iwi.me> Acked-by: Nils Jacobs <njacobs8@hetnet.nl> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5948 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 2010-10-13 08:23:02 +02:00			`select POWER_BUTTON_FORCE_ENABLE`
Add Win Enterprises' PL6064 board Signed-off-by: Anish K. Patel <anishp@win-ent.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5158 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 2010-02-24 17:36:56 +01:00
			`config MAINBOARD_DIR`
			`string`
			`default winent/pl6064`

			`config MAINBOARD_PART_NUMBER`
			`string`
			`default "PL6064"`

			`config IRQ_SLOT_COUNT`
			`int`
			`default 7`

Restructured all vendors' Kconfig files to no longer source the boards' Kconfigs from within the choice/endchoice block. This makes it possible to define user visible board specific options. Moved all vendor names and PCI ids to the vendors' Kconfigs. Now all options in each file depend on the same symbol, so replaced all "depends on"s with a single "if". Sorted boards (sort -d), cleaned whitespace. This patch also introduces a dummy option BOARD_SPECIFIC_OPTIONS, which is always "y" and never used. It it simply needed to have something to attach the boards' "select" statements to. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5754 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 2010-08-30 18:36:51 +02:00			`endif # BOARD_WINENT_PL6064`